数控车铣中心Mori Seiki
NTX 2000 SZ 1500
机器数据
技术细节
- 车削长度:
- 1,540 毫米
- X轴行程:
- 495 毫米
- Y轴行程:
- 125 毫米
- Z轴移动距离:
- 1,560 毫米
- 床滑道上方的回转直径:
- 660 毫米
- 控制器型号:
- MSX-711 (MAPPS IV)
提供
- 位置:
- Oslo, 挪威
– 距离：约 8,806 公里
- 可用性:
- 拍卖结束后立即
- 交付条件:
- FCA
€10,000.00 (约束性)
免费
描述
Partially overhauled machine with only approx. 3,000 spindle hours!
Measurement results attached.
TECHNICAL DETAILS
Turning length: 1,540 mm
Max. turning diameter: 610 mm (Turret 2: 274 mm)
Swing diameter over bed: 660 mm
Swing diameter over cross slide: 660 mm (Turret 2: 300 mm)
Turning/milling spindle
X-axis travel: 495 mm
Y-axis travel: 125 mm
Z-axis travel: 1,560 mm
B-axis: 120 degrees
Spindle speed: 12,000 rpm
Drive power: 18.5/11 kW (10 min./continuous operation)
Tool magazine
Magazine positions: 76
Tool holder: Capto C6
Lower turret
Number of tool positions: 10
Tool change time: 0.19 s
Main spindle
Spindle speed: 5,000 rpm
Main spindle drive power: 22/18.5 kW (30 min./continuous operation)
Counter spindle
Spindle speed: 5,000 rpm
Counter spindle drive power: 22/18.5 kW (30 min./continuous operation)
MACHINE DETAILS
Control: MSX-711 (MAPPS IV)
Operating hours
Spindle hours: 3,006 h
Operating hours: 4,526 h
EQUIPMENT
Spindle 2 with tailstock option
Electronic handwheel
Interface for high-pressure cooling system
Chip conveyor
Air nozzle for chuck and tool tip
Automatic tool measurement system for upper and lower positions
Bar feeder interface
Hobbing function
廣告是自動翻譯的，翻譯中可能會出現一些錯誤。
支付处理
- 购买附加费用:
- 18 %
- 付款条件:
- 100% 预付款
- 支付方式:
银行转账
优惠详情
- 產品ID:
- A20656115
- 參考編號:
- AUC-2511179
- 最後更新:
- 於 04.12.2025
- 独家优惠:
- 仅在拍卖中提供
参观
Tamworth Mori SeikiNTX2000/1500SZ
德国 DMG MORIDMC 340 U
Fuente de Cantos ESTARTA301
品川区 OKUMAMULTUS B750 C3000
Fröndenberg/Ruhr WFL MillTurnM40
Haaksbergen DanobatRS-4000 S5
Schweiz CHIRONFZ 12 MT high speed
Ciriè ParpasXS63
Soltau RödersTecRXP500DSC
Berlin JungC8
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-信任认证标志
什么是可信印章？
Machineseeker通过Machineseeker信任标志认证精选经销商。 在发放之前，Machineseeker 经验丰富的员工会进行标准化和全面的检测。
我們要檢查什麼？
查看
交易許可證 或 商業登記冊摘錄
查看交易商的
地址
確認
銀行連接
驗證
電話
是否可接通 主要的電話號碼
信用報告
中不能包含負面的must not contains negative criteria
買家投訴
會導致收回信任標誌这对您作为买家意味着什么？
通过 Machineseeker 信任标识，您作为买家无需自行检查，就可以识别出极有可能进行诚信且合法经营的可信经销商。
当然，在购买过程中仍可能出现分歧。 Machineseeker 对在 Machineseeker 上活跃的买家或卖家的法律违规行为不承担责任。