连续薄膜干燥机GENIUS Machinery Co
DW380 Continuous Agglomerator
连续薄膜干燥机
GENIUS Machinery Co
DW380 Continuous Agglomerator
出厂年份
2026
状况
全新
(完全功能)
位置
Rīga 

基本数据
价格和位置
- 位置:
- 24 - 31 Tomsona st, 1013 Riga, Latvija

拨打
技术细节
功率:
198 千瓦 (269.20 马力)
优惠详情
- 广告编号:
- A19068066
- 参考编号:
- GENI - DW380
- 更新:
- 最近更新时间为 05.08.2026
描述
Plastic squeeze dryers / Agglomerators are a vital part of plastic film washing lines.
Washed films retain up to 40% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer/Agglomerator is a must to dehydrate the washed film and increase the density of recycled film and fibre material. This also will increase the capacity of the extrusion process and further refine the quality of final plastic pellets.
Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would be uneconomic to agglomerate on a conventional batch agglomerator. By redusing the moisture so significantly the productivity of the extruder and quality of pellets is increased exponentially. The latest development for drying and simultaneously agglomerating washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the resultant squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying where materials are still in lightweight flake form, and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids on entry to the dryer, to output dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders saving more energy, as the materials are so dry and dense they can be fed direct to extruders for pellet production. With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour.
Kedpfx Aewg Sgcecaond
Washed films retain up to 40% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer/Agglomerator is a must to dehydrate the washed film and increase the density of recycled film and fibre material. This also will increase the capacity of the extrusion process and further refine the quality of final plastic pellets.
Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would be uneconomic to agglomerate on a conventional batch agglomerator. By redusing the moisture so significantly the productivity of the extruder and quality of pellets is increased exponentially. The latest development for drying and simultaneously agglomerating washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the resultant squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying where materials are still in lightweight flake form, and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids on entry to the dryer, to output dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders saving more energy, as the materials are so dry and dense they can be fed direct to extruders for pellet production. With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour.
Kedpfx Aewg Sgcecaond
供應商
注意: 免费注册或登录,以获取所有信息。
注册于: 2025
7 在线广告
发送询价
电话 & 传真
+44 7712 ... 广告
这些广告您可能也感兴趣。
成功
您的消息已发送。
小广告
Osnabrück
9,386 km
卷盘分配器
KlankeRGS20
KlankeRGS20
成功
您的消息已发送。
小广告
Děčín
9,093 km
压块机
RUF400
RUF400
成功
您的消息已发送。
小广告
Częstochowa
8,780 km
威马WL6S 22KW
WEIMAWL 6 S
WEIMAWL 6 S
成功
您的消息已发送。
小广告
Satu Mare
8,662 km
纺织品切割机
Kuris / Bullmer / Bierrebidiv.
Kuris / Bullmer / Bierrebidiv.
成功
您的消息已发送。
小广告
联合王国
9,912 km
莱斯特里茨 ZSE40 双螺杆挤出机
Leistritz Extrusionstechnik GmbHZSE40HP-36D
Leistritz Extrusionstechnik GmbHZSE40HP-36D
成功
您的消息已发送。
小广告
Grafenwöhr
9,292 km
单轴碎纸机
LINDNERMICROMAT MS 2000
LINDNERMICROMAT MS 2000
成功
您的消息已发送。
小广告
Íscar
10,872 km
CNC BIESSE BREMA EKO 902 插入场合
BIESSEEKO 902 INSERT
BIESSEEKO 902 INSERT
成功
您的消息已发送。
小广告
Bad Salzungen
9,339 km
星屏
Butzer - EVRSternsieb ESS
Butzer - EVRSternsieb ESS
成功
您的消息已发送。
小广告
Kehra
8,076 km
模具
WeinigStacker A5 150m/min
WeinigStacker A5 150m/min
成功
您的消息已发送。
小广告
Balaguer
10,498 km
液压机MHG ER.2S.DM 300t
MHGER.2S.DM-300/2100
MHGER.2S.DM-300/2100
您的广告已成功删除
发生错误































































































