道路清扫车

Bucher - GMeiner - Giletta TGM 18250 Bucher

Operating hours: 3534, first registration: 23.06.2016, self-propelled

Standard basic equipment:

- Fan unit - hydraulically driven fan via chassis-mounted, transmission-independent PTO (semi-hydrostatic drive)
- Hydraulic fan drive
- Hydraulic oil tank 50 l
- Engine compartment lined with sound-insulating material
- Fan exhaust routed upward through the tank superstructure
- Hydraulic pump, simplex
- Sweeping debris container (with rear tailgate and sieve) and water tank made of 1.4003 stainless steel
Iodpfx Ajfy Am Uefrsa
- Engine compartment cover made of standard steel
- Gross volume of debris container 6.5 m³
- Debris container floor made of chrome-alloyed stainless steel, 1.4301
- Dumping angle of debris container approx. 55 degrees
- Dirt chute made of stainless steel, 1.4003
- Inspection flaps right and left
- Dirty water drain 4", A-coupling
- Air guide sieve, manually foldable
- 2 revolving warning beacons at rear of debris container
- Air shutoff on suction hose, pneumatically operated
- Multi-stage safety support, pneumatically operated
- Marker lights at rear of container, side marker lights
- Integrated water tank
- Preparation for rear suction hose boom or roof-mounted installation
- Side marker lights

Debris pick-up:

- Debris intake with wear-resistant coating
- Coarse debris pick-up by tilting suction mouth
- Suction hose diameter 250 mm
- Disc brushes, pushed
- Hydraulically driven disc brushes, steel
- Disc brushes, steel, diameter 500 mm, pulled
- Infinitely variable speed control for disc brushes
- Two robust swiveling trailing wheels
- Automatic raising of sweeping assemblies in reverse
- Work lights for sweeping assembly

Roller brush:

- Roller brush suspension, pulled
- Brush length 1,300 mm, brush diameter 406 mm with synthetic bristles (chassis dependent)
- Hydraulically driven roller brush
- Throw limitation skirt for roller brush assembly

Water system:

- Water tank capacity approx. 1,554 l
- Water tank made of stainless steel 1.4003 with coating
- Water level indicator in driver's cab
- Water filling device, Storz C (2"), right
- Manual water filling device, right and left
- Water pump, hydraulically driven
- Automatic water shut-off when raising sweeping units
- Spray water connection, 3/4", rear right
- Water blow-out system
- Electric water valves in cab
- 2-nozzle low-pressure spray bar, front

Instrument panel and control console:

- Bucher instrument carrier, including 7" color display
- Ergonomic control unit mounted on driver's door, equipped with main functions
- Display includes: water level indicator, operating hours and rear axle load
- Warning and control lights for rear axle load
- Control and regulation unit for adjusting brush ground pressure (brush relief), infinitely variable disc brush speed adjustment
- Electric valves for water system, operated in cab
- Operation of debris container functions via wired remote control from cab and also externally
- Operation of air guide sieve, control at rear right of vehicle
- Overload indicator for rear axle load, warning lamp in display (option)

廣告是自動翻譯的，翻譯中可能會出現一些錯誤。