BIESSE Selco WNT 630板材分切锯(2022年)BIESSE
Selco WNT 630
BIESSE Selco WNT 630板材分切锯(2022年)
BIESSE
Selco WNT 630
出厂年份
2022
状况
二手
位置
Barntrup 

基本数据
价格和位置
- 位置:
- Dieselstr. 1, 32683 Barntrup, Deutschland

拨打
优惠详情
- 广告编号:
- A22565182
- 参考编号:
- WEHRMANN-0402024
- 更新:
- 最近更新时间为 10.11.2026
描述
- Work surface: 3800 x 2200 mm with rear lifting table
- Maximum cutting length: 3800 mm
- Saw blade overhang: 108 mm
- Maximum gripper opening: 100 mm
- Minimum panel size: 1830 x 915 mm
- Maximum panel size: 3660 x 2200 mm
- Maximum stack height: 630 mm
- Minimum thickness on the lifting table: 10 mm
- Maximum lifting table stroke: 985 mm
- Load capacity of the lifting table: 5 t
Panel dividing saw
Manufacturer: Biesse
Type: Selco WNT 630
Year of construction: 2022
Ksdpjzuyl Tjfx Acajdw
Technical data
- Work surface: 3800 x 2200 mm with rear lifting table
- Maximum cutting length: 3800 mm
- Saw blade overhang: 108 mm
- Maximum gripper opening: 100 mm
- Minimum panel size: 1830 x 915 mm
- Maximum panel size: 3660 x 2200 mm
- Maximum stack height: 630 mm
- Minimum thickness on the lifting table: 10 mm
- Maximum lifting table stroke: 985 mm
- Load capacity of the lifting table: 5 t
- Main saw motor: 18.5 kW
- Scoring blade motor: 2.2 kW
- Main saw blade: Ø 400 mm, 1 piece included
- Scoring saw blade: Ø 200 mm with trapezoidal teeth, 1 piece included
- Saw blade lifting via brushless motor and ball screw
- Control of the pressure beam opening
- Electronic DIGISET alignment of the scoring saw blade to the main saw blade
- Scoring unit can be deactivated via the control panel
- QUICK CHANGE system for both saw blades
- Travel speed of the saw carriage: 1-160 m/min, brushless drive
- Maximum feed speed: 90 m/min, brushless drive
- Side alignment unit integrated into the saw carriage (0 mm + 3,500 mm according to the quotation specifications)
Loading and unloading devices
- Rear loading onto the lifting table with powered rollers and automatic stack positioning at the zero point
- Powered rollers on the lifting table for side loading
- Loading and unloading from the right side under constant operator control
- Two panel counters for the automatic feeding of thin, calibrated panels from 2.5 mm thickness
- Automatic detection of the lower support plate based on the thickness set in the machine parameters
- Six liftable pneumatic grippers in the standard configuration
- Two additional liftable pneumatic grippers with double lower fingers for mounting on the slide
- Two push contact points
- Two front alignment stops
- Eleven standard roller modules and two additional roller modules with wheels
- One discharge table with dimensions 2,050 × 850 mm with non-driven rollers, replacing the standard air cushion discharge table with dimensions 2,050 × 620 mm
- Two additional rounded air cushion discharge tables, each with dimensions 2,050 × 620 mm
- One fan for up to six air cushion tables
Control, maintenance and safety
- Windows-based PC control with flat screen, keyboard and mouse
- OSI-Plus interface
- Measuring system on the control panel for manual cuts
- Remote start button for the working cycle with safety stop, located at the second or third table
- Automatic lubrication
- Protective devices and safety devices
The machine is almost new and has only been used for a few months.
Note:
The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.
该广告为自动翻译,可能存在翻译错误。
- Maximum cutting length: 3800 mm
- Saw blade overhang: 108 mm
- Maximum gripper opening: 100 mm
- Minimum panel size: 1830 x 915 mm
- Maximum panel size: 3660 x 2200 mm
- Maximum stack height: 630 mm
- Minimum thickness on the lifting table: 10 mm
- Maximum lifting table stroke: 985 mm
- Load capacity of the lifting table: 5 t
Panel dividing saw
Manufacturer: Biesse
Type: Selco WNT 630
Year of construction: 2022
Ksdpjzuyl Tjfx Acajdw
Technical data
- Work surface: 3800 x 2200 mm with rear lifting table
- Maximum cutting length: 3800 mm
- Saw blade overhang: 108 mm
- Maximum gripper opening: 100 mm
- Minimum panel size: 1830 x 915 mm
- Maximum panel size: 3660 x 2200 mm
- Maximum stack height: 630 mm
- Minimum thickness on the lifting table: 10 mm
- Maximum lifting table stroke: 985 mm
- Load capacity of the lifting table: 5 t
- Main saw motor: 18.5 kW
- Scoring blade motor: 2.2 kW
- Main saw blade: Ø 400 mm, 1 piece included
- Scoring saw blade: Ø 200 mm with trapezoidal teeth, 1 piece included
- Saw blade lifting via brushless motor and ball screw
- Control of the pressure beam opening
- Electronic DIGISET alignment of the scoring saw blade to the main saw blade
- Scoring unit can be deactivated via the control panel
- QUICK CHANGE system for both saw blades
- Travel speed of the saw carriage: 1-160 m/min, brushless drive
- Maximum feed speed: 90 m/min, brushless drive
- Side alignment unit integrated into the saw carriage (0 mm + 3,500 mm according to the quotation specifications)
Loading and unloading devices
- Rear loading onto the lifting table with powered rollers and automatic stack positioning at the zero point
- Powered rollers on the lifting table for side loading
- Loading and unloading from the right side under constant operator control
- Two panel counters for the automatic feeding of thin, calibrated panels from 2.5 mm thickness
- Automatic detection of the lower support plate based on the thickness set in the machine parameters
- Six liftable pneumatic grippers in the standard configuration
- Two additional liftable pneumatic grippers with double lower fingers for mounting on the slide
- Two push contact points
- Two front alignment stops
- Eleven standard roller modules and two additional roller modules with wheels
- One discharge table with dimensions 2,050 × 850 mm with non-driven rollers, replacing the standard air cushion discharge table with dimensions 2,050 × 620 mm
- Two additional rounded air cushion discharge tables, each with dimensions 2,050 × 620 mm
- One fan for up to six air cushion tables
Control, maintenance and safety
- Windows-based PC control with flat screen, keyboard and mouse
- OSI-Plus interface
- Measuring system on the control panel for manual cuts
- Remote start button for the working cycle with safety stop, located at the second or third table
- Automatic lubrication
- Protective devices and safety devices
The machine is almost new and has only been used for a few months.
Note:
The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.
该广告为自动翻译,可能存在翻译错误。
发送询价
电话 & 传真
+49 5263 ... 广告
这些广告您可能也感兴趣。
成功
您的消息已发送。
小广告
波兰
9,568 km
BIESSE Selco WNT 630
BIESSESelco WNT 630
BIESSESelco WNT 630
成功
您的消息已发送。
小广告
Bad Laer
9,390 km
分板锯
ScheerPA 4500
ScheerPA 4500
成功
您的消息已发送。
小广告
意大利
9,680 km
面板切割系统和堆垛
HOLZMAHPP 380/43/43 + TLF
HOLZMAHPP 380/43/43 + TLF
成功
您的消息已发送。
小广告
Bad Honnef
9,520 km
板锯机 HOLZ-HER 1255 SECTOR pro - 展览机械 - 展商简介 - 2013中国国际瓦楞展
Holz-Her1255 SECTOR pro
Holz-Her1255 SECTOR pro
成功
您的消息已发送。
小广告
Maasmechelen
9,594 km
玻璃切割台
BotteroDUAL LINE 548LAM-38 - 363BCS-J
BotteroDUAL LINE 548LAM-38 - 363BCS-J
成功
您的消息已发送。
小广告
Smętowo Graniczne
8,675 km
新闻
KallesoeLV4519 + KL20
KallesoeLV4519 + KL20
成功
您的消息已发送。
小广告
Pederoa
9,463 km
加工中心
WeekeOptimat BHC 550
WeekeOptimat BHC 550
成功
您的消息已发送。
小广告
Roreto
9,848 km
1 号批量封边机(激光)
IMANovimat LASER System/I/R75/1110/R3
IMANovimat LASER System/I/R75/1110/R3
成功
您的消息已发送。
小广告
Scerne
9,532 km
五轴加工中心
TeknaTKE 955-7
TeknaTKE 955-7
成功
您的消息已发送。
小广告
Wöllstadt
9,456 km
移印机
TAMPOPRINTHermetic 130 Tampoprint BN Q
TAMPOPRINTHermetic 130 Tampoprint BN Q
您的广告已成功删除
发生错误




















































































































































