BIESSE Selco WNT 630BIESSE
Selco WNT 630
BIESSE Selco WNT 630
BIESSE
Selco WNT 630
出厂年份
2022
状况
二手
位置
波兰 

基本数据
价格和位置
- 位置:
- , 波兰

拨打
优惠详情
- 广告编号:
- A22550297
- 参考编号:
- PL-SAW-BIE-2022-00001
- 更新:
- 最近更新时间为 10.11.2026
描述
This BIESSE Selco WNT 630 panel saw was manufactured in 2022. It features a maximum cutting length of 3800 mm, saw blade projection of 108 mm, and a lift table capacity of 5 tons. Ideal for handling large panels up to 3660 x 2200 mm. If you are looking to get high-quality cutting capabilities, consider the BIESSE Selco WNT 630 machine we have for sale. Contact us for more information.
• Maximum cutting length: 3,800 mm
• Maximum saw blade projection: 108 mm
• Maximum gripper opening: 100 mm
• Minimum panel size on the lift table: 1,830 × 915 mm
• Maximum panel size on the lift table: 3,660 × 2,200 mm
• Maximum stack height: 630 mm
• Minimum loading thickness on the lift table: 10 mm
• Working table height: 985 mm
• Lift table load capacity: 5,000 kgMain saw and scoring unit
• Main saw motor: 18.5 kW (25 hp)
• Scoring saw motor: 2.2 kW (3 hp)
• Main saw blade: Ø 400 mm, 1 included
• Scoring saw blade: Ø 200 mm with trapezoidal teeth, 1 included
• Saw blade lift driven by a brushless motor and ball screw
Knsdpezug E Hsfx Acaed
• Pressure beam opening control
• DIGISET electronic alignment of the scoring blade with the main saw blade
• Scoring unit can be disabled from the control panel
• QUICK CHANGE system for both saw blades
• Saw carriage travel speed: 1–160 m/min, brushless drive
• Maximum pusher speed: 90 m/min, brushless drive
• Side alignment unit integrated into the saw carriage (0 mm + 3,500 mm as specified in the quotation)Loading and unloading equipment
• Rear loading onto the lift table with powered rollers and automatic stack positioning at the zero point
• Powered rollers on the lift table for side loading
• Right-side loading and unloading with continuous operator control
• Two panel-counting devices for automatic loading of thin calibrated panels from 2.5 mm thick
• Automatic detection of the bottom support panel based on the thickness set in the machine parameters
• Six liftable pneumatic grippers in the standard configuration
• Two additional liftable pneumatic grippers with double lower fingers for mounting on the pusher
• Two pusher contact points
• Two front alignment stops
• Eleven standard roller modules and two additional roller modules with wheels
• One 2,050 × 850 mm unloading table with non-powered rollers, replacing the standard 2,050 × 620 mm air flotation table
• Two additional rounded air flotation unloading tables, each 2,050 × 620 mm
• One fan serving up to six air flotation tablesControl, maintenance and safety
• Windows-based PC control with flat-panel monitor, keyboard and mouse
• OSI Plus interface
• Panel measuring system for manual cuts
• Remote cycle start button with safety stop, located at the second or third table
• Automatic lubrication
• Safety guards and protective devices
• Maximum cutting length: 3,800 mm
• Maximum saw blade projection: 108 mm
• Maximum gripper opening: 100 mm
• Minimum panel size on the lift table: 1,830 × 915 mm
• Maximum panel size on the lift table: 3,660 × 2,200 mm
• Maximum stack height: 630 mm
• Minimum loading thickness on the lift table: 10 mm
• Working table height: 985 mm
• Lift table load capacity: 5,000 kgMain saw and scoring unit
• Main saw motor: 18.5 kW (25 hp)
• Scoring saw motor: 2.2 kW (3 hp)
• Main saw blade: Ø 400 mm, 1 included
• Scoring saw blade: Ø 200 mm with trapezoidal teeth, 1 included
• Saw blade lift driven by a brushless motor and ball screw
Knsdpezug E Hsfx Acaed
• Pressure beam opening control
• DIGISET electronic alignment of the scoring blade with the main saw blade
• Scoring unit can be disabled from the control panel
• QUICK CHANGE system for both saw blades
• Saw carriage travel speed: 1–160 m/min, brushless drive
• Maximum pusher speed: 90 m/min, brushless drive
• Side alignment unit integrated into the saw carriage (0 mm + 3,500 mm as specified in the quotation)Loading and unloading equipment
• Rear loading onto the lift table with powered rollers and automatic stack positioning at the zero point
• Powered rollers on the lift table for side loading
• Right-side loading and unloading with continuous operator control
• Two panel-counting devices for automatic loading of thin calibrated panels from 2.5 mm thick
• Automatic detection of the bottom support panel based on the thickness set in the machine parameters
• Six liftable pneumatic grippers in the standard configuration
• Two additional liftable pneumatic grippers with double lower fingers for mounting on the pusher
• Two pusher contact points
• Two front alignment stops
• Eleven standard roller modules and two additional roller modules with wheels
• One 2,050 × 850 mm unloading table with non-powered rollers, replacing the standard 2,050 × 620 mm air flotation table
• Two additional rounded air flotation unloading tables, each 2,050 × 620 mm
• One fan serving up to six air flotation tablesControl, maintenance and safety
• Windows-based PC control with flat-panel monitor, keyboard and mouse
• OSI Plus interface
• Panel measuring system for manual cuts
• Remote cycle start button with safety stop, located at the second or third table
• Automatic lubrication
• Safety guards and protective devices
这些广告您可能也感兴趣。
成功
您的消息已发送。
小广告
Barntrup
9,335 km
BIESSE Selco WNT 630板材分切锯(2022年)
BIESSESelco WNT 630
BIESSESelco WNT 630
成功
您的消息已发送。
小广告
Bad Laer
9,390 km
分板锯
ScheerPA 4500
ScheerPA 4500
成功
您的消息已发送。
小广告
德国
9,335 km
立式数控钻孔及加工中心 Weeke Optimat BHX(2016年)
WeekeOptimat BHX
WeekeOptimat BHX
成功
您的消息已发送。
小广告
Barntrup
9,335 km
BIESSE Brema EKO 2.2 立式数控加工中心(2022 年)
BIESSEBrema EKO 2.2
BIESSEBrema EKO 2.2
成功
您的消息已发送。
小广告
Sliven
8,617 km
滚涂机
CeflaSmartcoater MF EVO
CeflaSmartcoater MF EVO
成功
您的消息已发送。
小广告
Tiszakécske
8,896 km
加工中心
HOMAGCENTATEQ P-110
HOMAGCENTATEQ P-110
成功
您的消息已发送。
小广告
Drachten
9,443 km
卧式薄板带锯
RHINO SAYWER300XL-3
RHINO SAYWER300XL-3
成功
您的消息已发送。
小广告
Doetinchem
9,502 km
带锯
ACMStar 700
ACMStar 700
成功
您的消息已发送。
小广告
Bad Sooden-Allendorf
9,326 km
铣边机
BrandtOptimat F 13
BrandtOptimat F 13
成功
您的消息已发送。
小广告
Basel
9,690 km
推台锯
HOMAGSAWTEQ B-200 / HPP 200/43/43
HOMAGSAWTEQ B-200 / HPP 200/43/43
您的广告已成功删除
发生错误
















































































































