完整锯木厂（固定式）

ZENZ BN 110 S

Used horizontal ZENZ block bandsaw line, type BN 110 S, with complete conveying system, stationary. Automatic infeed system with log feed-in device, control panel for the block bandsaw, with cutting program and conveying system for the removal of cut material, including a sorting conveyor.

Year of manufacture: 2007; general overhaul in 2022
Conveying system year of manufacture: 2022
Manufacturer's number: 141-8300

Equipment:
• 22kW drive motor
• 7m cutting length
• 5 vertical supports
• 2 log turners (+2 holders)
Pjdpfe Adr Uvjx Ai Tjrc
• Log lifting preparation with frame
• 4 leveling supports with clamps (+2 holders)
• 1 log roller
• 1 new pre-cutter
• PLC control including cutting program
• Seat mounted on armrests
• PLC on the left - joystick on the right
• 1 Zenz sharpening machine, type AHB (factory number: S-1012)
• 4 bandsaw blades 6000x100x1.1 stellite for softwood (prod. no.: AB 0)
• 4 bandsaw blades 6000x100x1.1 stellite for hardwood (prod. no.: AB 0)
• Water lubrication system with 20l tank and nozzle
o Mounted on the blade guide
• Log lifting system
o With 3 log lifting arms
o With 2 cylinders
• Log lifting preparation in the frame
o With control unit
o Holder for pipe
o Two holders for cylinders
• Ejector, hydraulically operated, for 820mm frame
• Green laser indicator, horizontal

Mechanization consisting of:
• Folding frame, hydraulically operated, for removal at the saw with electrically driven roller conveyor
• Electrically driven roller conveyor with hydraulic ejectors
o Both roller conveyors run simultaneously
• Roller conveyor, 4m long, slightly inclined with stop
o All electrical and hydraulic elements can be operated from the control panel

The block bandsaw, including the conveying system, is fully operational.

If required, we can provide support with dismantling and assembly.

该广告为自动翻译，可能存在翻译错误。