热处理设备/真空干燥机WTT
Thermobehandlungsanlage / Vakuumtrockner
热处理设备/真空干燥机
WTT
Thermobehandlungsanlage / Vakuumtrockner
状况
二手
位置
Salzburg 

显示图片
显示地图
机器数据
价格和位置
- 位置:
- 5020 Salzburg, Österreich

拨打
优惠详情
- 广告编号:
- A18784181
- 参考编号:
- 3213
- 更新:
- 最近更新时间为 08.04.2025
描述
No. 3213
Thermal treatment system / vacuum dryer WTT
Used, year of construction 2017
Thermal treatment system / thermal chamber for the modification of wood
Duedpfx Aev Si Szob Aep
The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium.
Technical data:
Capacity: 5950 - 9900 m³ of wood per year (for 330 working days)
Usable volume: 9 m³ (with 50 mm wood thickness)
Stack dimensions: 10500 x 1300 x 1100 mm LWH
Minimum board thickness: 10 mm
Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A
Specific power consumption: 15.9 kW/m³
Maximum heat output: 2 MW (230 °C - 250 °C thermal oil)
Heat consumption: 120 kWh/m³ wood
Autoclave length: 11,000 mm
Autoclave diameter: 1,800 mm
Autoclave material: 10 mm stainless steel duplex EN 4462
Door opens hydraulically, with 1.5 kW drive
Working pressure: 0.1 to 15 bar (absolute)
Working temperature: 0 °C to 220 °C
200 mm glass wool insulation, clad with 1 mm galvanized sheet steel
Main components:
1. autoclave, in which the heat treatment takes place
2. vacuum system that sucks the air out of the autoclave before heat is applied
3. energy center with a 2 MW oil burner
4. 4 MW cooling system with dry coolers
5. nitrogen generator
6. gas cooler system
Heating and cooling system:
Heat exchanger: 8 units (4 on each side)
Material: Stainless steel pipes (seawater resistant)
Total floor area: 165 m²
Cooling water consumption: 1000 l/batch (not contaminated, only heated)
Control and operation:
Control system: WTT ExoT (fully automatic)
22” color monitor, IBM computer, printer
Sensors:
4 PT100 temperature sensors
2 mechanical thermometers
1 vacuum/pressure transmitter
1 mechanical vacuum/pressure gauge
Special equipment:
Hydraulic rail bridge for convenient transportation of wooden trolleys
Automatic trolley extraction with cable winch (1.5 kW)
2 MW thermal oil boiler (heating)
Fuel oil tank (4000 l) with measuring system
Insulated 20 foot steel container for heating module
Stainless steel safety chimney (300 mm diameter, 6000 mm length)
Functional description:
1. filling the autoclave with wood
2. creating a pre-vacuum
3. filling with gas
4. heating
5. modifying
6. cooling
7. pressure equalization
8. creating a post-vacuum / drying
9. pressure equalization
10. emptying
Certified EC Pressure Equipment Directive (PED) 97/23/EF
Construction EN 13445
Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly
Dismantling, loading and transportation by us optionally possible
Subject to errors in the description and price
To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended
Sold as is
Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee
Subject to prior sale
For used machines, any warranty is excluded, the following applies: “purchased as seen”
Pictures and videos serve as examples and do not represent the actual scope of delivery
Terms of payment: Prices excl. VAT, payment before collection or dispatch
Terms of delivery: ex location
Thermal treatment system / vacuum dryer WTT
Used, year of construction 2017
Thermal treatment system / thermal chamber for the modification of wood
Duedpfx Aev Si Szob Aep
The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium.
Technical data:
Capacity: 5950 - 9900 m³ of wood per year (for 330 working days)
Usable volume: 9 m³ (with 50 mm wood thickness)
Stack dimensions: 10500 x 1300 x 1100 mm LWH
Minimum board thickness: 10 mm
Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A
Specific power consumption: 15.9 kW/m³
Maximum heat output: 2 MW (230 °C - 250 °C thermal oil)
Heat consumption: 120 kWh/m³ wood
Autoclave length: 11,000 mm
Autoclave diameter: 1,800 mm
Autoclave material: 10 mm stainless steel duplex EN 4462
Door opens hydraulically, with 1.5 kW drive
Working pressure: 0.1 to 15 bar (absolute)
Working temperature: 0 °C to 220 °C
200 mm glass wool insulation, clad with 1 mm galvanized sheet steel
Main components:
1. autoclave, in which the heat treatment takes place
2. vacuum system that sucks the air out of the autoclave before heat is applied
3. energy center with a 2 MW oil burner
4. 4 MW cooling system with dry coolers
5. nitrogen generator
6. gas cooler system
Heating and cooling system:
Heat exchanger: 8 units (4 on each side)
Material: Stainless steel pipes (seawater resistant)
Total floor area: 165 m²
Cooling water consumption: 1000 l/batch (not contaminated, only heated)
Control and operation:
Control system: WTT ExoT (fully automatic)
22” color monitor, IBM computer, printer
Sensors:
4 PT100 temperature sensors
2 mechanical thermometers
1 vacuum/pressure transmitter
1 mechanical vacuum/pressure gauge
Special equipment:
Hydraulic rail bridge for convenient transportation of wooden trolleys
Automatic trolley extraction with cable winch (1.5 kW)
2 MW thermal oil boiler (heating)
Fuel oil tank (4000 l) with measuring system
Insulated 20 foot steel container for heating module
Stainless steel safety chimney (300 mm diameter, 6000 mm length)
Functional description:
1. filling the autoclave with wood
2. creating a pre-vacuum
3. filling with gas
4. heating
5. modifying
6. cooling
7. pressure equalization
8. creating a post-vacuum / drying
9. pressure equalization
10. emptying
Certified EC Pressure Equipment Directive (PED) 97/23/EF
Construction EN 13445
Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly
Dismantling, loading and transportation by us optionally possible
Subject to errors in the description and price
To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended
Sold as is
Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee
Subject to prior sale
For used machines, any warranty is excluded, the following applies: “purchased as seen”
Pictures and videos serve as examples and do not represent the actual scope of delivery
Terms of payment: Prices excl. VAT, payment before collection or dispatch
Terms of delivery: ex location
这些广告您可能也感兴趣。
小广告
Roches-Prémarie-Andillé
10,206 km
压刨机
KUPFERMUHLEDOMA 2050
KUPFERMUHLEDOMA 2050
小广告
Kehra
8,076 km
自动直刀研磨机
StehleStehle S820 not Weinig Rondamat 909
StehleStehle S820 not Weinig Rondamat 909
小广告
Nersingen
9,478 km
KVH 和 BSH 生产机械化
HIT
HIT
小广告
Zona Artigianale
9,447 km
鼓式斩波器
Holzmatic engineeringTRH500 3W-L
Holzmatic engineeringTRH500 3W-L
小广告
Gusselby
8,596 km
完整的刨削生产线
Waco, HallWaco 3000
Waco, HallWaco 3000
小广告
Kehra
8,076 km
双端修剪锯
WeinigHigh-Mech 893 not Hydromat
WeinigHigh-Mech 893 not Hydromat
小广告
Київ
8,041 km
实木地板生产线
LEDINEKROTOLES 400 D - S
LEDINEKROTOLES 400 D - S
小广告
Roches-Prémarie-Andillé
10,206 km
双端开榫机
CELASCHITSA 280
CELASCHITSA 280
小广告
Camarma de Esteruelas
10,854 km
削片机
KÄLIN HobeltechnikMPC-P
KÄLIN HobeltechnikMPC-P
小广告
Aalen
9,456 km
窗户上光系统
FINITUREPro Flow Impraegnieranlage
FINITUREPro Flow Impraegnieranlage
您的广告已成功删除
发生错误











































































































