注塑机WITTMANN Battenfeld
SmartPower 210/1330 Unilog B8
机器数据
技术细节
- 夹紧力 夹紧力:
- 2,100 千牛
- 螺杆直径:
- 65 毫米
- 排量:
- 913 cm³
- 注射压力:
- 1,600 横杆
- 总重量:
- 10,500 千克
- 控制器型号:
- UNILOG B8
提供
- 位置:
- Nordrhein-Westfalen, 德国
– 距离：约 9,475 公里
- 可用性:
- 拍卖结束后立即
- 交付条件:
- FCA
免费
免费
描述
The machine was serviced by the manufacturer in 2021 and brought up to the current standard! The machine has not been used since and is therefore in very good condition!
The machine is offered including 2 Kistler modules for cavity pressure control!
TECHNICAL DETAILS
Material type: Thermoset
Clamping force: 2,100 kN
Screw diameter: 65 mm
Screw stroke: 275 mm
Screw L/D ratio: 22
Max. screw speed: 278 rpm
Screw torque: 1,920 Nm
Number of heating zones: 5
Clear tie bar spacing (HxV): 670 x 620 mm
Mould height installation: 350 mm
Platen spacing: 1100 mm
Opening stroke: 750 mm
Ejector stroke: 200 mm
Ejector force: 65 kN
Theoretical shot volume: 913 cm³
Specific injection pressure: 1,600 bar
Max. plasticising rate: 62 g/s
Nozzle travel/nozzle force: 400 mm / 100 kN
Free-flow injection rate: 419 cm³/s
Cylinder heating capacity: 27 kW
Number of heating zones incl. nozzle: 5
MACHINE DETAILS
Control type: UNILOG B8
Hydraulics
Hydraulic oil tank capacity: 600 litres
Min./max. oil temperature (HLP 32): 30 °C / 40 °C
Min./max. oil temperature (HLP 46): 40 °C / 50 °C
Switch-on temperature for oil cooling (HLP 32): 35 °C
Switch-on temperature for oil cooling (HLP 46): 45 °C
Electrical
Drive power hydraulic pump: 37 kW
Max. screw cylinder temperature: 350 °C
Cooling water system
Cooling water consumption: approx. 0.5 - 1.5 m³/h
Max. cooling water inflow: 35 °C
Cooling water return: max. 10 bar
Ambient temperature: °C
Noise level: 65 dB A
Weight: 10,500 kg
Operating hours: 1,437 h
EQUIPMENT
Kistler module for cavity pressure control zone 1: 20,000 pC
Kistler module for cavity pressure control zone 2: 10,000 pC
廣告是自動翻譯的，翻譯中可能會出現一些錯誤。
支付处理
- 购买附加费用:
- 18 %
- 付款条件:
- 100% 预付款
- 支付方式:
银行转账
优惠详情
- 產品ID:
- A21223657
- 參考編號:
- AUC-2602045
- 最後更新:
- 於 20.02.2026
- 独家优惠:
- 仅在拍卖中提供
参观
Breda FERROMATIK MILACRONeQ-280 - 2290
德国 PiovanDPM604
Wrocław Wittmann BattenfeldMacroPower 900/ 8800
德国 STORKS+6600 8650 rep
Wien Wittmann
Burgoberbach WITTMANNW832-0611
Wrocław BATTENFELDTM 400/3400
Brașov battenfeld-cincinnatiHDPE PIPE EXTRUSION LINE
Trenčianske Stankovce PIOVANDryer DPM604
Trenčianske Stankovce WittmannTempro plus C 140
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-信任认证标志
什么是可信印章？
Machineseeker通过Machineseeker信任标志认证精选经销商。 在发放之前，Machineseeker 经验丰富的员工会进行标准化和全面的检测。
我們要檢查什麼？
查看
交易許可證 或 商業登記冊摘錄
查看交易商的
地址
確認
銀行連接
驗證
電話
是否可接通 主要的電話號碼
信用報告
中不能包含負面的must not contains negative criteria
買家投訴
會導致收回信任標誌这对您作为买家意味着什么？
通过 Machineseeker 信任标识，您作为买家无需自行检查，就可以识别出极有可能进行诚信且合法经营的可信经销商。
当然，在购买过程中仍可能出现分歧。 Machineseeker 对在 Machineseeker 上活跃的买家或卖家的法律违规行为不承担责任。