铣床TIGER
FO 135
铣床
TIGER
FO 135
製造年份
1994
狀況
二手
位置
Novazzano 

顯示圖片
显示地图
价格和位置
- 位置:
- Via Roncaglia 5, 6883 Novazzano, CH
撥打
技术细节
- 送料长度 X 轴:
- 1,050 毫米
- Y轴进给长度:
- 360 毫米
- Z轴进给行程:
- 500 毫米
- X轴行程:
- 1,050 毫米
- Y轴行程:
- 360 毫米
- Z轴移动距离:
- 500 毫米
- 总重量:
- 3,000 千克
- 设备:
- 文档 / 手册
优惠详情
- 產品ID:
- A15124519
- 最後更新:
- 於 24.10.2024
描述
Tiger FO 135 universal milling machine
Description of the machine
The machine was purchased new in 1994 and has only been in operation for a few hours.
The milling machine is fully functional. The axis movements are smooth and the guides are in good condition.
good condition. These have an automatic lubrication system.
The table is in good condition and shows hardly any signs of wear.
The machine also has a digital readout for the 3 axes, which makes it possible to work
with cutter compensation and recurring measurement machining.
Operating instructions are included with both the machine and the digital indicator.
Technical specifications
- Table dimensions 1,400 x 340 mm, 4 T-slots
- Automatic traverse path:
➢ Longitudinal X 1,050 mm
➢ Transverse Y 360 mm
➢ Vertical Z 500 mm
- Fixing the spindle cone:
➢ Vertical axis ISO 40, automatic locking
➢ Horizontal axis ISO 40, manual locking
- Spindle speed range:
➢ Vertical axis 33 ÷ 1,560 rpm, 12 speeds
➢ Horizontal axis 35 ÷ 1,550 rpm, 12 speeds
- Installed power:
➢ 5 kW vertical spindle motor
➢ 7.5 kW horizontal spindle motor
➢ Direct current motor 15 Nm
- Variable power supplies
Continuous speed 0 ÷ 1,500 mm/min
- Fast feed
➢ Lengthwise and crosswise 3,000 mm/min
Vertical 1,500 mm/min
- Universal head with manual shaft lowering of 80 mm
- Automatic lubrication with pump
Iijdpsrqwbiefx Af Aeh
- Low-voltage electrical controls on the pushbutton panel of the side arm
- Star/delta start
- Magnetic thermal protection from Siemens
- Net weight 3,000 kg
- Machine dimensions (for transportation)
➢ Width 2,300 mm
➢ Depth 2,900 mm
➢ Height 2,400 mm
Accessories
- Counter supports for cutting shaft
- Cutting shaft ø32 mm
Tiger FO 135 universal milling machine
Description
The machine was purchased new in 1994 and has only had a few hours of operation.
The milling machine is fully functional. Axis movements are smooth and the guides are in
good condition. These have an automatic lubrication system.
The table is in good condition and shows hardly any signs of wear.
The machine also has a DRO for the 3 axes, which offers the possibility of working
with milling compensation and recurring measurement processing.
Both the machine and the DRO come with operating instructions.
Technical specifications
- Table dimensions 1,400 x 340 mm, 4 T-slots
- Automatic travel:
➢ Longitudinal X 1,050 mm
➢ Transverse Y 360 mm
➢ Vertical Z 500 mm
- Fixing the spindle cone:
➢ Vertical axis ISO 40, automatic locking
➢ Horizontal axis ISO 40, manual locking
- Spindle speed range:
➢ Vertical axis 33 ÷ 1,560 rpm, 12 speeds
Horizontal axis 35 ÷ 1,550 rpm, 12 speeds
- Installed services:
➢ 5 kW vertical spindle motor
➢ 7.5 kW horizontal spindle motor
➢ DC motor 15 Nm
- Variable power supplies
Continuous speed 0 ÷ 1,500 mm/min
- Fast forward
➢ Longitudinal and transverse 3,000 mm/min
➢ vertical 1,500 mm/min
- Universal head with manual shaft lowering of 80 mm
- Automatic lubrication with pump
- Low voltage electrical controls on side arm push button panel
- Star/delta start
- Magnetic thermal protection from Siemens
- Net weight 3,000 kg
- Dimensions of the machine (for transport)
Width 2,300 mm
➢ Depth 2,900 mm
➢ Height 2,400 mm
Accesories
- Counter supports for cutting shaft
- Cutting shaft ø32 mm
廣告是自動翻譯的,翻譯中可能會出現一些錯誤。
Description of the machine
The machine was purchased new in 1994 and has only been in operation for a few hours.
The milling machine is fully functional. The axis movements are smooth and the guides are in good condition.
good condition. These have an automatic lubrication system.
The table is in good condition and shows hardly any signs of wear.
The machine also has a digital readout for the 3 axes, which makes it possible to work
with cutter compensation and recurring measurement machining.
Operating instructions are included with both the machine and the digital indicator.
Technical specifications
- Table dimensions 1,400 x 340 mm, 4 T-slots
- Automatic traverse path:
➢ Longitudinal X 1,050 mm
➢ Transverse Y 360 mm
➢ Vertical Z 500 mm
- Fixing the spindle cone:
➢ Vertical axis ISO 40, automatic locking
➢ Horizontal axis ISO 40, manual locking
- Spindle speed range:
➢ Vertical axis 33 ÷ 1,560 rpm, 12 speeds
➢ Horizontal axis 35 ÷ 1,550 rpm, 12 speeds
- Installed power:
➢ 5 kW vertical spindle motor
➢ 7.5 kW horizontal spindle motor
➢ Direct current motor 15 Nm
- Variable power supplies
Continuous speed 0 ÷ 1,500 mm/min
- Fast feed
➢ Lengthwise and crosswise 3,000 mm/min
Vertical 1,500 mm/min
- Universal head with manual shaft lowering of 80 mm
- Automatic lubrication with pump
Iijdpsrqwbiefx Af Aeh
- Low-voltage electrical controls on the pushbutton panel of the side arm
- Star/delta start
- Magnetic thermal protection from Siemens
- Net weight 3,000 kg
- Machine dimensions (for transportation)
➢ Width 2,300 mm
➢ Depth 2,900 mm
➢ Height 2,400 mm
Accessories
- Counter supports for cutting shaft
- Cutting shaft ø32 mm
Tiger FO 135 universal milling machine
Description
The machine was purchased new in 1994 and has only had a few hours of operation.
The milling machine is fully functional. Axis movements are smooth and the guides are in
good condition. These have an automatic lubrication system.
The table is in good condition and shows hardly any signs of wear.
The machine also has a DRO for the 3 axes, which offers the possibility of working
with milling compensation and recurring measurement processing.
Both the machine and the DRO come with operating instructions.
Technical specifications
- Table dimensions 1,400 x 340 mm, 4 T-slots
- Automatic travel:
➢ Longitudinal X 1,050 mm
➢ Transverse Y 360 mm
➢ Vertical Z 500 mm
- Fixing the spindle cone:
➢ Vertical axis ISO 40, automatic locking
➢ Horizontal axis ISO 40, manual locking
- Spindle speed range:
➢ Vertical axis 33 ÷ 1,560 rpm, 12 speeds
Horizontal axis 35 ÷ 1,550 rpm, 12 speeds
- Installed services:
➢ 5 kW vertical spindle motor
➢ 7.5 kW horizontal spindle motor
➢ DC motor 15 Nm
- Variable power supplies
Continuous speed 0 ÷ 1,500 mm/min
- Fast forward
➢ Longitudinal and transverse 3,000 mm/min
➢ vertical 1,500 mm/min
- Universal head with manual shaft lowering of 80 mm
- Automatic lubrication with pump
- Low voltage electrical controls on side arm push button panel
- Star/delta start
- Magnetic thermal protection from Siemens
- Net weight 3,000 kg
- Dimensions of the machine (for transport)
Width 2,300 mm
➢ Depth 2,900 mm
➢ Height 2,400 mm
Accesories
- Counter supports for cutting shaft
- Cutting shaft ø32 mm
廣告是自動翻譯的,翻譯中可能會出現一些錯誤。
您的广告已成功删除
发生错误