行走地板半挂车

STAS Biostar 90,6 cbm

Last kingpin load national (t) 12
Axle load national (t) 8
Axle spacing (mm) 1310-1310
Saddle height (mm) 1150
Chassis width (mm) 1200
Internal height front (mm) 2641
Internal height rear (mm) 2778
Overall width (mm) 2550
Overall length (mm) 14000

Chassis steel
Axles JOST
Brake type JOST - DCA-T7
Offset (ET) 120
Option: 1st axle with lift axle and traction aid
Activation of traction aid via button in the truck
Option: 3rd axle with lift axle
Brake pad wear indicator connected
Tire pressure monitoring Wabco Trailerpulse
Air suspension ECAS with lift and lower valve
Lowering of air suspension via smartboard, as well as lift and lower valve
Coupling head pneumatic European palm coupling
Rims steel
Landing gears Weweler as steel gearbox landing gears, type Weweler, with compensating feet, single-side operation, and 2 speed stages
Operation underrun protection fixed
Splash flap underrun guard across the full width of the underrun protection
EBS operation on the left in the direction of travel, behind the axles
Control console moving floor on the left in the direction of travel, behind the axles
Toolbox on the left in the direction of travel, behind the axles
Lighting manufacturer Aspöck
Lighting ECOLED II
2 pcs LED reverse lights, rear left and right in direction of travel on lamp carrier
Position work lights (operated via switch): 2 pcs LED reverse lights front left and right
Nledevy Rc Dopfx Ahzsh

Hydraulic coupling rotary coupling
Hydraulic coupling - size 3/4"
Hydraulic coupling - gender female
Hydraulic coupling - hose 3,000 mm
Hydraulic coupling - position connection possibility at the front wall (additionally with connection possibility at the landing legs)

Standard smartboard
Air connection on the side of the control panel
Aluminium access ladder 3.80 m - on the right in the direction of travel
Position of broom and shovel holder on left side underrun protection
Two plastic wheel chocks incl. holder
Moving floor system brand Cargo Floor
Air and electrical console centrally in direction of travel

Body
Rear wall type swing doors
A-frame foldable on the door, right
Cover plate between floor and front wall, fixed aluminium plate and PVC strip
Front wall profile 3 mm - 2 mm
Side wall profile 3 mm - 2 mm, smooth inside and outside, double-walled profiles 600 mm wide - 30 mm thick
Wear plates rectangular 1500 x 1000 x 4mm
Distance lower corner profile to upper side wall rear 2649
Operation floor system radio remote control
Cargofloor control type CF 500 SL-C - E-CONTROL
Floor profiles 21
Type floor profile 8 mm flat
Moving floor end plate stainless steel
With additional plastic guides underneath the floor profiles
End cap reinforcement stainless steel shoes over the end caps of the floor profiles, with aluminium wear plate above the end caps
Oil temperature sensor moving floor system
Discharge wall
Type discharge wall aluminium
Storage discharge wall 6 wheels with bidirectional cleaning (cargo floor)
Rear wall aluminium
Design swing door split 1/2 to 1/2, with door closing crossbeam
Opening of the door leaf: right door leaf opens first
Door closing crossbeam in pivotable design
Material door closing crossbeam aluminium
Locking rear doors 1x rotary bar / per door half
Door leaf left 2 pcs door handles per rotary bar
Door leaf right 1 pc door handle per rotary bar
Fastening of opened door leaves spring retainers with plastic protection
Rear wall sealing with standard rubber seal
Additional rear wall lock pneumatically single-acting
Operation of additional lock

廣告是自動翻譯的，翻譯中可能會出現一些錯誤。