温度冷却装置 (TCU)Single
Water Advanced WP7
温度冷却装置 (TCU)
Single
Water Advanced WP7
状况
全新
位置
Hochdorf 

基本数据
价格和位置
- 出租:
- 可能
- 位置:
- Ostring 17-19, 73269 Hochdorf, Deutschland

拨打
优惠详情
- 广告编号:
- A6050776
- 参考编号:
- Water Advanced WP7
- 更新:
- 最近更新时间为 21.11.2024
描述
*TECHNICAL SPECIFICATION:
Heating capacity: up to 54 kW
Cooling capacity: up to 300 kW
medium: water up to 200°C
Max. external volume: 43 ltr at 200°C
Kodpfxeg Ey T Es Acajdw
max. Flow rate: max. 230 l/min
max. delivery pressure: up to 8.3 bar
Motor power: up to 3 kW
Dimensions LxWxH: 1,460 x 525 x 1,200 mm
Weight approx. 330kg
Circulation medium connection: flange DN40 (DIN EN 1092-1), form B1
*HIGHLIGHTS EQUIPMENT:
-Control and regulation Smart Controller (7" touch display)
-Heating control via solid-state relay
-Control box IP54, externally ventilated
-Expansion tank, heater and piping stainless steel
-Heating via stainless steel tubular heating elements made of Incolloy
-Dirt trap (circulation)
-Unit ready for connection and mounted on castors, 2 of them steerable and with brake
-Cooling and filling controlled by solenoid valve
-configurable automatic filling via KW inflow or separate connection (factory-supplied via cooling water inflow)
-flow measurement by differential pressure principle
-Level monitoring by magnetic float switch
-automatic temperature-dependent system closure (not with WP7-90)
-flow monitoring by recording the flow rate
-Bypass between flow and return with reduced cross-section
-dirty filter in the cooling water inflow, filling and return of the circulation system
-Continuous bypass of the heat exchanger via 3-way motorised control valve (WP7-180/200)
-System pressure monitoring via pressure transmitter in the AD tank (WP7-150/180/200)
-Pressure booster pump for system filling (WP7-180/200, otherwise optional)
-Safety temperature limiter (STB) in the heater and flow (WP7-200)
-Pressure gauge in the supply line on the back of the unit
-heat-insulated circulation circuit (WP7-150/180/200)
Visit our website for more details or for other performance classes.
*This unit is compliant with the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.
Heating capacity: up to 54 kW
Cooling capacity: up to 300 kW
medium: water up to 200°C
Max. external volume: 43 ltr at 200°C
Kodpfxeg Ey T Es Acajdw
max. Flow rate: max. 230 l/min
max. delivery pressure: up to 8.3 bar
Motor power: up to 3 kW
Dimensions LxWxH: 1,460 x 525 x 1,200 mm
Weight approx. 330kg
Circulation medium connection: flange DN40 (DIN EN 1092-1), form B1
*HIGHLIGHTS EQUIPMENT:
-Control and regulation Smart Controller (7" touch display)
-Heating control via solid-state relay
-Control box IP54, externally ventilated
-Expansion tank, heater and piping stainless steel
-Heating via stainless steel tubular heating elements made of Incolloy
-Dirt trap (circulation)
-Unit ready for connection and mounted on castors, 2 of them steerable and with brake
-Cooling and filling controlled by solenoid valve
-configurable automatic filling via KW inflow or separate connection (factory-supplied via cooling water inflow)
-flow measurement by differential pressure principle
-Level monitoring by magnetic float switch
-automatic temperature-dependent system closure (not with WP7-90)
-flow monitoring by recording the flow rate
-Bypass between flow and return with reduced cross-section
-dirty filter in the cooling water inflow, filling and return of the circulation system
-Continuous bypass of the heat exchanger via 3-way motorised control valve (WP7-180/200)
-System pressure monitoring via pressure transmitter in the AD tank (WP7-150/180/200)
-Pressure booster pump for system filling (WP7-180/200, otherwise optional)
-Safety temperature limiter (STB) in the heater and flow (WP7-200)
-Pressure gauge in the supply line on the back of the unit
-heat-insulated circulation circuit (WP7-150/180/200)
Visit our website for more details or for other performance classes.
*This unit is compliant with the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.
供應商
注意: 免费注册或登录,以获取所有信息。
注册于: 2020
8 在线广告
发送询价
电话 & 传真
+49 7153 ... 广告
这些广告您可能也感兴趣。
成功
您的消息已发送。
小广告
德国
9,303 km
球磨机
NetzschMini Cer
NetzschMini Cer
成功
您的消息已发送。
小广告
Babberich
9,513 km
深孔钻床 2000 x 1300 x 1500
TBTBW 250 S
TBTBW 250 S
成功
您的消息已发送。
小广告
Emmelshausen
9,537 km
三维打印机
OR LaserOrlas Creator 3D-Metall Drucker
OR LaserOrlas Creator 3D-Metall Drucker
成功
您的消息已发送。
小广告
德国
9,303 km
移动立柱式铣床
ANAYAKHVM-6000-P
ANAYAKHVM-6000-P
成功
您的消息已发送。
小广告
Orlová
8,868 km
SoloBaker 蛋糕切刀
SoloBakerBCS 201
SoloBakerBCS 201
成功
您的消息已发送。
小广告
Dorsten
9,481 km
床身铣床-通用
ANAYAKVH plus 2000
ANAYAKVH plus 2000
成功
您的消息已发送。
小广告
Hamburg
9,188 km
应急发电机
Newpower GeneratorNWR125 Ricardo Motor Newpower Generator
Newpower GeneratorNWR125 Ricardo Motor Newpower Generator
成功
您的消息已发送。
小广告
Halver
9,478 km
双泵 f.克劳斯玛菲号6441936
REXROTHSY2DFE1-21/071-071
REXROTHSY2DFE1-21/071-071
成功
您的消息已发送。
小广告
Cloppenburg
9,347 km
2002年 Reinecker WZS 60
ReineckerWZS 60
ReineckerWZS 60
成功
您的消息已发送。
小广告
Burgoberbach
9,403 km
注塑机
KraussMaffeiKM 130-750CX 61010843
KraussMaffeiKM 130-750CX 61010843
您的广告已成功删除
发生错误







































































