共振试验机

SincoTec Power Swingly 20 kN EXCITING MOT

SincoTec
Type: Exciting Mot
Resonance test bench POWER SWINGLY 20 kN
The resonance test bench POWER SWINGLY BigTable is designed as a two-mass oscillator.
It consists of an oscillating head excited by a frequency-controlled asynchronous motor using an unbalance motor,
which is arranged in the upper part of the machine and generates the dynamic amplitude.
The oscillating head is supported by pre-tensioned helical compression springs on the upper crossbeam and is guided centrally.
The medium-load drive is arranged in the lower part of the machine and applies the static preload
with the help of a gear motor via a spindle drive.
The sample space is located above the clamping table and is limited at the top by the adjustable crossbeam.
The test bench is controlled by the EXCITING MOT control system.
The complete control electronics for the control system are housed in an industrial PC cabinet.
The control cabinet is made of powder-coated sheet steel and meets protection class IP 50 according to EN 60529.
Technical data:
General data test bench:
Total height of test bench 1840 to 2240 mm
Height of machine table 1030 mm
Width of test bench 800 mm
Depth of test bench 1500 mm
Height of sample chamber max. 600 mm (without force transducer)
Free column passage 550 mm
Maximum force amplitude 10000 N
Maximum total force ±20000 N
Maximum vibration path ±5 mm
Test frequency 30 to 110 Hz
Accuracy of the measuring sensors min. Class 1 (according to DIN EN 10002-3)
Weight of test bench approx. 1880 kg
Max. weight of clamping device 150 kg
General data Control cabinet:
Total height of control cabinet 1900 mm
Height of table top 1080 mm
Width of control cabinet 650 mm
Depth of control cabinet 700 mm
Weight of control cabinet 152 kg
Color RAI 9006 (white aluminum), table top midnight
Conditions for the installation location:
Space requirement 2.5 x 2.5 m
Required ceiling height 2.8 m
Floor load capacity 170 N/cm²
Power supply 400 V / 50 Hz (clockwise rotating field)
Connection plug CEE socket, 2-pole, 16 A
Fuse 16 A
Connection and ambient conditions
Mains conditions:
Voltage 400 V rotating current with ΜΡ conductor and protective earth, clockwise rotating field
Voltage fluctuations < ± 10%
Lhodpfxovx Su Ss Af Aon
Short-term dips < 20 ms

Limits for continuous interference Radio interference level A according to VDE0871
Frequency 50 Ηz ± 1%
Protective earth Earthing resistance < 0.3 Ω
Model: POWER SWINGLY MOT
Condition: used
Scope of delivery: (See picture)
(Changes and errors in the technical data, information is subject to change!)
We will be happy to answer any further questions you may have over the phone.

廣告是自動翻譯的，翻譯中可能會出現一些錯誤。