曲轴铣削单元SEMA
SE 100
曲轴铣削单元
SEMA
SE 100
起拍價 不包含增值稅
€22,800
製造年份
2005
狀況
二手
位置
Dortmund 

顯示圖片
显示地图
价格和位置
起拍價 不包含增值稅
€22,800
- 位置:
- Rüschebrinkstr. 151-153, 44143 Dortmund-Wambel, DE
撥打
优惠详情
- 產品ID:
- A3265780
- 最後更新:
- 於 13.01.2025
描述
1 used crankshaft milling device in very good condition for mounting e.g. on a lathe for milling crankshafts or other milling work
Make: SEMA, Origin Austria
Model: SE 100
Year of manufacture: 2005
Technical data:
Spindle holder ISO 50, concentricity / test mandrel L=300 mm = 0.01 mm
Iijdsddziyjpfx Af Ajh
Speed range, infinitely variable, currently set to 2,000 rpm
Spindle is designed for up to 3,000 rpm
Drive power currently 15 kW
The milling spindle is designed for up to 25 kW
Bearing diameter 110 mm
The 2 screwed-on adapter plates under the milling spindle are each screwed on. These plates can be used for your lathe, reworked or may have to be newly manufactured.
Screw-on surface of the milling spindle: L x W: 490 x 250 mm
Accessories / special features:
Milling spindle:
- The milling spindle is mounted on the face support of your lathe
- Infinitely variable speed adjustment, LENZE frequency converter, designed for up to 30 KW
- Clockwise / counter-clockwise rotation
- Lifetime lubricated spindle bearings
- Sturdy construction with hardened and ground spindle
- High precision
- Spindle with 2 bearings and 5 spindle bearings
- Tool tightening via a threaded spindle
- Mobile carriage with control panel
- Emergency stop
- Lockable main switch
Drive gear for the main spindle:
- A long drive rod is mounted in the spindle bore and connected to the gearbox
- Infinitely variable speed adjustment, LENZE frequency converter
- Clockwise / counterclockwise rotation
- Jog mode Fast / slow
The pictures show this unit mounted on a SARO SPA 10 x 3000 universal lathe for milling crankshafts. This lathe is not included in the scope of delivery!
Siegfried Volz Machine Tools
Rüschebrinkstr. 151-153
D - 44143 Dortmund - Wambel
廣告是自動翻譯的,翻譯中可能會出現一些錯誤。
Make: SEMA, Origin Austria
Model: SE 100
Year of manufacture: 2005
Technical data:
Spindle holder ISO 50, concentricity / test mandrel L=300 mm = 0.01 mm
Iijdsddziyjpfx Af Ajh
Speed range, infinitely variable, currently set to 2,000 rpm
Spindle is designed for up to 3,000 rpm
Drive power currently 15 kW
The milling spindle is designed for up to 25 kW
Bearing diameter 110 mm
The 2 screwed-on adapter plates under the milling spindle are each screwed on. These plates can be used for your lathe, reworked or may have to be newly manufactured.
Screw-on surface of the milling spindle: L x W: 490 x 250 mm
Accessories / special features:
Milling spindle:
- The milling spindle is mounted on the face support of your lathe
- Infinitely variable speed adjustment, LENZE frequency converter, designed for up to 30 KW
- Clockwise / counter-clockwise rotation
- Lifetime lubricated spindle bearings
- Sturdy construction with hardened and ground spindle
- High precision
- Spindle with 2 bearings and 5 spindle bearings
- Tool tightening via a threaded spindle
- Mobile carriage with control panel
- Emergency stop
- Lockable main switch
Drive gear for the main spindle:
- A long drive rod is mounted in the spindle bore and connected to the gearbox
- Infinitely variable speed adjustment, LENZE frequency converter
- Clockwise / counterclockwise rotation
- Jog mode Fast / slow
The pictures show this unit mounted on a SARO SPA 10 x 3000 universal lathe for milling crankshafts. This lathe is not included in the scope of delivery!
Siegfried Volz Machine Tools
Rüschebrinkstr. 151-153
D - 44143 Dortmund - Wambel
廣告是自動翻譯的,翻譯中可能會出現一些錯誤。
您的广告已成功删除
发生错误