宽带砂光机SCM
dmc sd 60 RCS 135
宽带砂光机
SCM
dmc sd 60 RCS 135
出厂年份
2024
状况
展品机
(完全功能)
位置
Bad Sooden-Allendorf 

机器数据
价格和位置
- 位置:
- Werrastraße 20, 37242 Bad Sooden-Allendorf, Deutschland

拨打
技术细节
- 磨削宽度:
- 1,350 毫米
优惠详情
- 广告编号:
- A16332157
- 参考编号:
- N3540
- 更新:
- 最近更新时间为 09.03.2026
描述
SCM Wide Belt Calibration and Fine Sanding Machine
Model: dmc sd 60 RCS 135
Technical Specifications:
Working width: 1,100 mm
Min./max. working height: 4–170 mm
Abrasive belt width: 1,120 mm
Abrasive belt length: 2,150 mm
Main motor power: 11 (15) kW (HP)
Gear motor: 0.45/0.8 (0.6/1.1) kW (HP)
Feed speed: 4.5/9 m/min
Standard equipment:
- R140/85 rubber-coated calibration roller, diameter 140 mm, 85 Shore - 1st position
- R160/45 rubber-coated sanding roller, diameter 160 mm, 45 Shore - 2nd position
- Hard sanding pad with manual working height adjustment
- Motor power for unit 1: 11 kW (15 HP)
- Electronic ammeter for main motor indicating current draw
- Electronic work height display
Fjdpfx Aetwqn Ssnbjpg
- Electronically controlled sanding belt oscillation
- Rubber pressure rollers
- Anti-kickback device at infeed before first unit
- 60 Shore rubber feed belt
- Roller table with two rollers at infeed and outfeed of working table
- Feed belt with two speeds 4.5 / 9 m/min driven by gear motor
- Automatic belt centering
Including the following special accessories:
1 pc. version "B" for RCS with: pneumatic on/off for roller 1st unit “R” + pneumatic on/off for roller 2nd unit “CS” + “MESAR” elastic segmented sanding pad + pneumatic on/off for sanding pad unit + electronic programming unit “LOGIC 50” + electronic working height adjustment
1 pc. CE safety standards
1 pc. roller table at infeed and outfeed for long workpieces, equipped with 5 non-driven rollers
1 pc. "RA" diagonally grooved steel contact roller, 1st unit
1 pc. main motor 15 kW
1 pc. abrasive belt wear optimizer
1 pc. LED interior lighting
1 pc. door with viewing window on rear side
1 pc. Logic SC control
该广告为自动翻译,可能存在翻译错误。
Model: dmc sd 60 RCS 135
Technical Specifications:
Working width: 1,100 mm
Min./max. working height: 4–170 mm
Abrasive belt width: 1,120 mm
Abrasive belt length: 2,150 mm
Main motor power: 11 (15) kW (HP)
Gear motor: 0.45/0.8 (0.6/1.1) kW (HP)
Feed speed: 4.5/9 m/min
Standard equipment:
- R140/85 rubber-coated calibration roller, diameter 140 mm, 85 Shore - 1st position
- R160/45 rubber-coated sanding roller, diameter 160 mm, 45 Shore - 2nd position
- Hard sanding pad with manual working height adjustment
- Motor power for unit 1: 11 kW (15 HP)
- Electronic ammeter for main motor indicating current draw
- Electronic work height display
Fjdpfx Aetwqn Ssnbjpg
- Electronically controlled sanding belt oscillation
- Rubber pressure rollers
- Anti-kickback device at infeed before first unit
- 60 Shore rubber feed belt
- Roller table with two rollers at infeed and outfeed of working table
- Feed belt with two speeds 4.5 / 9 m/min driven by gear motor
- Automatic belt centering
Including the following special accessories:
1 pc. version "B" for RCS with: pneumatic on/off for roller 1st unit “R” + pneumatic on/off for roller 2nd unit “CS” + “MESAR” elastic segmented sanding pad + pneumatic on/off for sanding pad unit + electronic programming unit “LOGIC 50” + electronic working height adjustment
1 pc. CE safety standards
1 pc. roller table at infeed and outfeed for long workpieces, equipped with 5 non-driven rollers
1 pc. "RA" diagonally grooved steel contact roller, 1st unit
1 pc. main motor 15 kW
1 pc. abrasive belt wear optimizer
1 pc. LED interior lighting
1 pc. door with viewing window on rear side
1 pc. Logic SC control
该广告为自动翻译,可能存在翻译错误。
供應商
注意: 免费注册或登录,以获取所有信息。
注册于: 2009
100 在线广告
发送询价
电话 & 传真
+49 5652 ... 广告
这些广告您可能也感兴趣。
小广告
Deutschlandsberg
9,232 km
单件木材砂光机
HESSJunior
HESSJunior
小广告
Krauchenwies
9,561 km
Panhans 回转铣床 245/20
Panhans245/20
Panhans245/20
小广告
Cantù
9,698 km
厚度刨床
SCMS 630/E
SCMS 630/E
小广告
Teisendorf
9,339 km
宽带砂光机
HeesemannJSM 1350 RC
HeesemannJSM 1350 RC
小广告
Strenči
8,113 km
分拣线
AlmabDry board sorting line
AlmabDry board sorting line
小广告
Gorzów Wielkopolski
8,929 km
封边机 Hebrock K 36 下一页
HebrockK36 Next
HebrockK36 Next
小广告
Oberkochen
9,459 km
磨床
LÖWERDSM 2004 Video
LÖWERDSM 2004 Video
小广告
Aalen
9,456 km
订书机
RUCHSERJumbo Automatic Video
RUCHSERJumbo Automatic Video
小广告
Juszczyn
8,792 km
格式锯
AltendorfF45
AltendorfF45
小广告
斯洛文尼亚
9,346 km
用于胶合木 GLULAM 的大型压机
Hydraulic Glulam PressModular, Custom Length, New 2025
Hydraulic Glulam PressModular, Custom Length, New 2025
您的广告已成功删除
发生错误




















































































