雕刻机

ROFIN-SINAR CombiLine Advanced WT

Laser type: PowerLine F100
Fgedpfx Ajxqp Rdoftek

Technical data:
Travel distances of linear axes
X/Y/Z axis: 800 / 300 / 300 mm
Max. workpiece weight: 30 kg

Heating, Ventilation, Air Conditioning:
Operating temperature: 25°C +/- 10°C
Storage temperature: 5°C to +40°C
Ambient conditions: non-condensing, non-corrosive, frost-free
Air electrical section: 160 m³/h

Pneumatic supply:
Medium: filtered, oil-free compressed air
Max. permissible operating pressure: 6 bar
Temperature range: -10° to +60°C

Laser safety class: Laser Class 1 according to EN (IEC) 60825-1:2007
Marking field size of the laser: 120 x 120 mm

Operating and storage conditions:
Floor load capacity: min. 500 kg/m²
Clearance above: 2 m for ventilation
Transport height: min. 2 m
Room height: min. 2.50 m

Electricity:
Input fuse (protection): 3 x 16 A
Nominal voltage: 400 V (+/-10%); 3P; N; PE
Nominal frequency: 50/60 Hz; neutral conductor loaded
Power consumption: 4 kVA (at 50 Hz)

Size and weight:
Width1): 1.50 m plus swivel arm max. 0.8 m (width without monitor)
Length1): 1.80 m plus swivel arm 0.5 m (length without monitor)
Height standing workstation: 1.20 m
Working height: 0.96 m (standing workstation)

Required space and volume 2):
Width: 3.00 m
Length: 2.50 m
Height: 2.20 m (standing workstation)
Area: 7.50 m²

Weight, approx.: 1500 kg

1) Width, length, and area of the laser processing machine may vary depending on the adjustment of the optional swivel arm.
2) The necessary space and volume do not include potential aisle space! The operator must define the safety distances around the machine in accordance with national occupational health and safety regulations.

Operating and storage conditions:
- No direct sunlight
- Do not place near radiators
- Avoid strong temperature fluctuations
- Do not install in areas with high dust levels
- Do not install in areas with high levels of oil, solvent, or cleaning agent vapors

廣告是自動翻譯的，翻譯中可能會出現一些錯誤。