拉削机

Rausch RS 3/1000

-WR 177-
Manufacturer: Rausch
Model: RS3 /1000
Machine No.: 3615/673
Year of Manufacture: 1988
Weight: 350kg
Overhaul: 04/2025 by Wiemers AG

General / Technical Data:
Bdodpfx Akjz Hl U Iewsh
Unused, partially overhauled, mechanical vertical broaching machine
Rausch RS 3 without CE marking
Pulling force: 3,000kg
Broaching speeds: 3m/min
Return speed: 3m/min
Maximum stroke: 1000mm
Maximum tool length: 1200mm
Table size / work area: 430mm x 320mm / 340mm x 220mm
Table through-hole: Ø 90mm for standard broaching mandrels "System Rausch"
Workpiece diameter: any (with the cabin removed)
Broaching capacity / keyway width: up to 18mm in steel (from 16mm keyway width only with offset tool shank)
Dimensions (h x w x d): 2,250mm x 800mm x 750mm (h = including 3-sided protective cabin)
Motor: 3.0kw / Power supply: 400V / 50 Hz

Equipment:
- Protective door with safety monitoring (emergency stop circuit)
- Chip chute
- Externally adjustable tool length adjustment system (System Rausch)
- Protective cover for stroke adjustment and electrical switching units
- Electrical sensing of the clamping jaws (System Rausch)
(Tool removal control to prevent unintentional retraction of the drawbar, providing additional safety for the operator & tool)
- Integrated coolant system
- 4-sided enclosed splash guard hood with protective door
- Extra reinforced chip basket and chip sieve with magnet insert
- Control panel external
- 2 grease points for the trapezoidal spindle drive with manual grease gun directly on the spindle nut

Note:
The machine has been partially overhauled by Rausch. The following wear parts have been replaced and renewed.
- New trapezoidal spindles and spindle nuts made of cast, wear-resistant bronze
- All bearings and seals are new
- New electrical system
- 4-sided enclosed splash guard hood with protective door at the front
- New protective door instead of the light barrier in the machine room
- New clamping jaws
- All sheet metal parts, such as covers, chip chute, basket, sieve and spindle protection, are new.
- External control panel

General
The double spindle drive ensures a smooth and central pulling point as well as a constant broaching speed. The machine is primarily designed for the production of keyways up to 18mm. (from 16mm keyway tools only with offset tool shanks)
Due to its design, the machine can be quickly and easily set up for broaching with flat broaching tools for keyways.
Due to the structurally universal design of the drawbar and the machine table, broaching with profile and flat broaching tools is possible without the use of additional draw heads.

该广告为自动翻译，可能存在翻译错误。