多重原始

Paul K34G−UU/1500 Multirip Circular Saw

−−−− Panel Data −−−−
− Type of panels: Particle board, MDF
− Top panel face: raw, uncoated
− Bottom panel face: raw, uncoated
− Panel geometry: plane−parallel / not warped or bent
− Panel density particle board: 550 kg/m3
− Panel density MDF: 650 kg/m3
− Panel length: 2500 − 2800 mm
− Panel width: 1100 − 1250 mm
− Panel thickness: 15 − 55 mm

−−−− Multirip Circular Saw −−−−
− Type of feeding system: automatic, locally provided
− Application: Multi−ripping using a fixed saw set−up including edge−hogging on both sides
− Edge hogging on the left: approx. 3.0 − 4.0 mm
− Edge hogging on the right: approx. 3.0 − 4.0 mm
− Minimum strip width: 32 mm
− Maximum strip width: 45 mm
− Tolerance on ripping width: +/− 0.2 mm
− Feed speed: approx. 15 − 50 m/min.
− Driving power top saw shaft: 55 kW
− Driving power bottom saw shaft: 90 kW


−−−− General −−−−
− Working height: 900 mm
− Operating voltage: 400 V/50 Hz, 3 phase (C1−C2−C3−N−PE // TN−C−S)
− Number of dust extraction outlets: 4
− Diameter of dust extraction outlets: 250 mm
− Air speed: 30 m/sec.
− Dust extraction capacity: approx. 21200 m3 per hour



MULTIRIP CIRCULAR SAW
K34G−UU/1500
Right−hand design
− Basic machine designed to accommodate two
bottom saw shafts with hydraulic vertical adjustment, arranged one after the other, for the fixed set−up of circular saw blades or milling cutters
− Hydraulic height adjustment of top rollers
− Mechanical setting of top roller pressure
− Continuous insert tables made of laminated wood placed above the saw shafts
− Saw shaft loading carriage
− Main dust extraction device at the bottom with outlets on the infeed and outfeed side
− Noise and dust enclosure with viewing window
− Door with safety interlock incorporated in the tilting machine hood on the driving side, for changing the saw shaft with the machine running
− 9 bottom knurled steel feed rollers (7 powered)
− 13 top polyurethane−ring covered feed rollers (all powered)
− Max. saw blade diameter: 270 mm
− Cardan feed drive system for top and bottom feed rollers
(and brush rollers, if included), consisting of gearbox with ball bearing spur gears, axletrees serving as drive shafts in the area of the rollers to be driven, power transmission to the rollers via cardan joints
− Built−in table with bevelled front edge, 250 mm
− Speed of saw shafts 4500 rpm
− Feed speed infinitely variable from 5 − 50 m/min. by frequency−controlled gear motor 2.2 kW, with normal accessories, without tools
− In case of manual removal of the workpieces directly after the machine, the maximum feed speed must be limited to 35 m/min. according to the European regulations.


CONTROL SYSTEM
Ksdpfei Dylfsx Abfsfa
M34G MULTIRIP SAW CONTROL SYSTEM
− Siemens SIMATIC HMI touch screen
− 7" colour display
− Siemens S7xx control
− control equipped with remote maintenance and thus easy to service
− controlled top roller height
− controlled saw shaft height
− product−specific programming possible (feed speed, material thickness, saw shaft height, ...)
− interfaces to the locally provided master computer on inquiry
− intuitive control due to the clearly arranged design
− signal exchange with the workpiece feeding system
− signal exchange with the workpiece removal system
− "Industry 4.0 ready"