单板压机ORMA
HL 5100x1400
单板压机
ORMA
HL 5100x1400
EXW 固定价格 不含增值税
€49,000
状况
二手
(完全功能)
位置
捷克共和国 

基本数据
价格和位置
EXW 固定价格 不含增值税
€49,000
- 位置:
- Draha 427, 66459 Telnice, Česká republika

拨打
优惠详情
- 广告编号:
- A18383796
- 更新:
- 最近更新时间为 19.11.2026
描述
Veneering press line, consisting of the following machines:
- OSAMA S2R adhesive applicator – 1300 mm – NEW MACHINE
- Feeder from the adhesive applicator to the conveyor
- Infeed conveyor, 6000 mm long x 950 mm wide, with drive
- Flat hydraulic press ORMA 5100x1400 mm – 12 pistons, minimum pressure 190 tons
- Outfeed conveyor, 6000 mm long x 950 mm wide, with drive
This press requires medium to high pressure for operation, to ensure the boards are 100% flat.
- Veneer board dimensions: 5100 x 1400 mm (solid, drilled steel boards, 50 mm thick)
- Board opening: 180 mm
Kjdpfovva Syjx Acajnd
- Total maximum pressure: 190 tons (or more)
- Pressure at full surface: up to 10 kg/cm2
- Number of hydraulic pistons: 12 pcs – piston diameter 140 mm
- MYLAR Teflon film on the boards
- Prepared for heating the boards with hot water, steam, or oil – without a boiler
- Machine dimensions: 2300 x 5100 mm x 2500 mm high, estimated weight 16 tons
--The press features a semi-automatic loading and unloading mode. After pressing the start button, the material is fed into the press, the pressing cycle starts automatically, and after the set time, the press opens. Material is unloaded at the beginning of a new cycle.
--The pressing plates are coated with MYLAR film, which facilitates material loading. These are solid steel plates with internal channels and a thickness of 50 mm. The plates themselves weigh approximately 4 tons, and the total weight of the press is about 16 tons.
--The press heating system is not currently connected in our facility. It was originally connected to a boiler and hot water or steam distribution system. Oil can also be used as a heat transfer medium to achieve high temperatures. There are companies that specialize in this type of equipment. The board heating temperature depends on the type of heat transfer medium used.
Price: 49,000 EUR excluding VAT, without the OSAMA adhesive applicator
Price: 58,000 EUR excluding VAT, including the OSAMA adhesive applicator
该广告为自动翻译,可能存在翻译错误。
- OSAMA S2R adhesive applicator – 1300 mm – NEW MACHINE
- Feeder from the adhesive applicator to the conveyor
- Infeed conveyor, 6000 mm long x 950 mm wide, with drive
- Flat hydraulic press ORMA 5100x1400 mm – 12 pistons, minimum pressure 190 tons
- Outfeed conveyor, 6000 mm long x 950 mm wide, with drive
This press requires medium to high pressure for operation, to ensure the boards are 100% flat.
- Veneer board dimensions: 5100 x 1400 mm (solid, drilled steel boards, 50 mm thick)
- Board opening: 180 mm
Kjdpfovva Syjx Acajnd
- Total maximum pressure: 190 tons (or more)
- Pressure at full surface: up to 10 kg/cm2
- Number of hydraulic pistons: 12 pcs – piston diameter 140 mm
- MYLAR Teflon film on the boards
- Prepared for heating the boards with hot water, steam, or oil – without a boiler
- Machine dimensions: 2300 x 5100 mm x 2500 mm high, estimated weight 16 tons
--The press features a semi-automatic loading and unloading mode. After pressing the start button, the material is fed into the press, the pressing cycle starts automatically, and after the set time, the press opens. Material is unloaded at the beginning of a new cycle.
--The pressing plates are coated with MYLAR film, which facilitates material loading. These are solid steel plates with internal channels and a thickness of 50 mm. The plates themselves weigh approximately 4 tons, and the total weight of the press is about 16 tons.
--The press heating system is not currently connected in our facility. It was originally connected to a boiler and hot water or steam distribution system. Oil can also be used as a heat transfer medium to achieve high temperatures. There are companies that specialize in this type of equipment. The board heating temperature depends on the type of heat transfer medium used.
Price: 49,000 EUR excluding VAT, without the OSAMA adhesive applicator
Price: 58,000 EUR excluding VAT, including the OSAMA adhesive applicator
该广告为自动翻译,可能存在翻译错误。
供應商
注意: 免费注册或登录,以获取所有信息。
注册于: 2020
10 在线广告
发送询价
电话 & 传真
+420 530 ... 广告
这些广告您可能也感兴趣。
成功
您的消息已发送。
小广告
Bitburg
9,610 km
涂胶机
OsamaS4R/P-1400
OsamaS4R/P-1400
成功
您的消息已发送。
小广告
Bad Oeynhausen
9,340 km
包装机/薄膜包装机
CMBEBC 150/70 ERL 150
CMBEBC 150/70 ERL 150
成功
您的消息已发送。
小广告
Barntrup
9,335 km
CNC加工中心 SCM Morbidelli N100 22-31 PROSPACE(2022年)
SCMMorbidelli N100 22-31 PROSPACE
SCMMorbidelli N100 22-31 PROSPACE
成功
您的消息已发送。
小广告
Sliven
8,617 km
滚涂机
CeflaSmartcoater MF EVO
CeflaSmartcoater MF EVO
成功
您的消息已发送。
小广告
Barntrup
9,335 km
BIESSE Brema EKO 2.2 立式数控加工中心(2022 年)
BIESSEBrema EKO 2.2
BIESSEBrema EKO 2.2
成功
您的消息已发送。
小广告
Timișoara
8,866 km
UV干燥机
CeflaFV 2 / 3500-46 SERTARE UVR2M
CeflaFV 2 / 3500-46 SERTARE UVR2M
成功
您的消息已发送。
小广告
Sesto Calende
9,731 km
横梁加工中心
UniteamCovertek
UniteamCovertek
成功
您的消息已发送。
小广告
土耳其
8,214 km
小松 PC350 岩石铲斗
KomatsuPC350 Rock Bucket
KomatsuPC350 Rock Bucket
成功
您的消息已发送。
小广告
Roreto
9,848 km
卸货机(单笼)
RBO (BIESSE Group)Tornado SC/FE 1300
RBO (BIESSE Group)Tornado SC/FE 1300
成功
您的消息已发送。
小广告
Plovdiv
8,756 km
加工中心
ITALMACPegaso
ITALMACPegaso
您的广告已成功删除
发生错误











































































































