压块机Nestro
NBP C 150
压块机
Nestro
NBP C 150
製造年份
2019
狀況
二手
位置
德国 

顯示圖片
显示地图
价格和位置
- 位置:
- D - Hessen
撥打
优惠详情
- 產品ID:
- A19798295
- 參考編號:
- ISS20250819-5453
- 最後更新:
- 於 20.08.2025
描述
Used machine
Identical in construction to Weima C 150
Year of manufacture: 2019
1845 operating hours
Equipment and technical data:
Drive power: 5.5 kW
Briquette diameter: 50 mm
Hydraulic oil capacity: 160 l
Throughput capacity: up to 50 kg/h (depending on material)
Connection rating: 400 V +/- 5% / 50 Hz
Includes:
Press mechanism with filling cylinder, main cylinder, clamping cylinder
Connection part for transport line
Chromed clamp
Hydraulic tank 160 l with pump motor + valve control
Safety switch for oil temperature
Control cabinet and electrical control system
Briquette length monitoring
Automatic end position for all cylinders
Manual control
Automatic "On/Off" with level limit switch
Material: shavings, sawdust from solid wood, loose, clean and free from contaminants*
Maximum dimensions: 10 mm
Throughput performance: approx. 50 m³/year/
* Contaminant specification: Everything except wood, wood pieces larger than 15 mm.
The throughput capacity is highly dependent on the material. Stated values are averages. May vary depending on mix ratio, moisture content, and material characteristics!
Iisdpfxow Rhk Do Af Aeh
Application case not known or not fully specified. Machine is being sold appropriately and solution-oriented by a specialist dealer.
With oil cooler or water cooling; ensure adequate ventilation for the press/unit/oil cooler.
In case of heat build-up, operating time may be drastically reduced due to increased temperature.
With new press clamp
Availability: by arrangement
Location: Flörsheim
廣告是自動翻譯的,翻譯中可能會出現一些錯誤。
Identical in construction to Weima C 150
Year of manufacture: 2019
1845 operating hours
Equipment and technical data:
Drive power: 5.5 kW
Briquette diameter: 50 mm
Hydraulic oil capacity: 160 l
Throughput capacity: up to 50 kg/h (depending on material)
Connection rating: 400 V +/- 5% / 50 Hz
Includes:
Press mechanism with filling cylinder, main cylinder, clamping cylinder
Connection part for transport line
Chromed clamp
Hydraulic tank 160 l with pump motor + valve control
Safety switch for oil temperature
Control cabinet and electrical control system
Briquette length monitoring
Automatic end position for all cylinders
Manual control
Automatic "On/Off" with level limit switch
Material: shavings, sawdust from solid wood, loose, clean and free from contaminants*
Maximum dimensions: 10 mm
Throughput performance: approx. 50 m³/year/
* Contaminant specification: Everything except wood, wood pieces larger than 15 mm.
The throughput capacity is highly dependent on the material. Stated values are averages. May vary depending on mix ratio, moisture content, and material characteristics!
Iisdpfxow Rhk Do Af Aeh
Application case not known or not fully specified. Machine is being sold appropriately and solution-oriented by a specialist dealer.
With oil cooler or water cooling; ensure adequate ventilation for the press/unit/oil cooler.
In case of heat build-up, operating time may be drastically reduced due to increased temperature.
With new press clamp
Availability: by arrangement
Location: Flörsheim
廣告是自動翻譯的,翻譯中可能會出現一些錯誤。
您的广告已成功删除
发生错误