铣床MIKRON
UMS 600
技术细节
- 送料长度 X 轴:
- 600 毫米
- Y轴进给长度:
- 500 毫米
- Z轴进给行程:
- 450 毫米
- 最大转速:
- 6,300 转/分
- 刀库刀位数量:
- 44
提供
- 位置:
- Hessen, 德国
– 距离：约 9,435 公里
- 可用性:
- 拍卖结束后立即
- 交付条件:
- FCA
€1,000.00 (约束性)
免费
描述
TECHNICAL DETAILS
Drive power at 44% duty cycle: 9 kW
Drive power at 100% duty cycle: 6 kW
Max. torque: 52 Nm
Machining spindles (vertical and horizontal)
Max. spindle torque at 44% duty cycle: 800 Nm
Number of gear stages: 4
Adjustable speed range (vertical and horizontal): 10 – 6,300 rpm
Tool holder / pull stud: SK 40 / DIN 69871
Max. tool weight: 13 kg
Tool diameter: 130 mm
Pull-in force: 10,000 N
Ejection force: 3,500 N
Travel paths in automatic operation
Longitudinal spindle feed movement (X-axis): 600 mm
Cross movement of spindle slide (Y-axis): 500 mm
Vertical movement of spindle slide (Z-axis): 450 mm
Feed drive (AC)
Programmable feed rate X / Y-axis: 0 – 15,000 mm/min
Programmable feed rate Z-axis: 0 – 12,000 mm/min
Rapid traverse speed X/Y-axis: 15,000 mm/min
Rapid traverse speed Z-axis: 12,000 mm/min
Coolant
Coolant tank capacity: 150 l
Flow rate: approx. 20 l/min
Noise emission
Sound power: 75 dB(A)
Clamping table
Table size: 530 × 900 mm
Number of T-slots: 4
T-slot width: 14 H7
Table load capacity: 400 kg
Tool changer TCD 44
Tool stations: 2 × 22
Tool diameter: 80 / 130 mm
Tool length (max.): 350 mm
Tool weight (max.): 6 kg
Max. workpiece weight in drum magazine: 200 kg
Chip-to-chip time: 20-25 s
Tool change time: 12 - 16 s
MACHINE DETAILS
Total weight with protective enclosure: 3,000 kg
Total weight with enclosure roof: 3,100 kg
Ambient conditions
Max. permissible ambient temperature: 35 °C
Max. permissible relative humidity: 75 %
Electrical connection data
Total installed rated power: 15.8 kW
Utilized and connected power: 12.3 kW
Operating voltage and frequency: 3 × 400 V / 50 Hz
廣告是自動翻譯的，翻譯中可能會出現一些錯誤。
支付处理
- 购买附加费用:
- 18 %
- 付款条件:
- 100% 预付款
- 支付方式:
银行转账
优惠详情
- 產品ID:
- A19229561
- 參考編號:
- AUC-2505100
- 最後更新:
- 於 27.05.2025
- 独家优惠:
- 仅在拍卖中提供
参观
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-信任认证标志
什么是可信印章？
Machineseeker通过Machineseeker信任标志认证精选经销商。 在发放之前，Machineseeker 经验丰富的员工会进行标准化和全面的检测。
我們要檢查什麼？
查看
交易許可證 或 商業登記冊摘錄
查看交易商的
地址
確認
銀行連接
驗證
電話
是否可接通 主要的電話號碼
信用報告
中不能包含負面的must not contains negative criteria
買家投訴
會導致收回信任標誌这对您作为买家意味着什么？
通过 Machineseeker 信任标识，您作为买家无需自行检查，就可以识别出极有可能进行诚信且合法经营的可信经销商。
当然，在购买过程中仍可能出现分歧。 Machineseeker 对在 Machineseeker 上活跃的买家或卖家的法律违规行为不承担责任。