平板卡车

MAN MAN 8x4 mit F1150RA.2.28 L616 Winde

MAN 8x4 Hydrodrive with F1150 Fassi Loader Crane

Vehicle description for: TGS 35.520 8x2H-6 BL CH

Detachable platform body, Jost fifth wheel coupling, fully clad in stainless steel (V2A)

Commercial tonnage: 35 t
2,980 mm main wheelbase
1,795 mm wheelbase between front axles
Lajdpjwllmmefx Af Ash
1,350 mm wheelbase between rear axle and trailing axle
Side exhaust silencer, right
Downward exhaust outlet
2 batteries, 12V, 210 Ah, Super Longlife (AGM), maintenance-free, for increased electrical demands
390 l fuel tank capacity, left
35 l AdBlue tank capacity, right
Air compressor, 1 cylinder, 360 cc, with fuel-saving system
Pneumatically controlled air dryer
Compressed air tanks, steel
Electronic Braking System (EBS)
Anti-lock Braking System (ABS)
Full emergency braking assistant
Disc brakes on front axle
Disc brakes on 2nd front axle
Disc brakes on rear axle
Disc brakes on trailing axle
Emergency brake signal, hazard warning activation
LED side marker lights
MAN diesel engine D2676 LFAX, 382 kW (520 hp), 2,650 Nm torque, Euro 6e
Heated fuel filter, for fuels up to cleanliness class 25
Fuel pre-filter, with oil/water separator, water sensor, heated (mixing valve)


F1150RA.2.28 L616 winch + 2-person basket (available as option at extra charge)

Unlimited slewing range
All hydraulic cylinders double-acting
Piston rods hard chrome-plated
Double knuckle boom system with PROLINK (overbending offset boom by up to 12°)
Electronic overload protection with FX900
FASSI stability control FSC incl. LMB II
Emergency stop, with optical alarm (90% and 100%)
Pressure limiting and load holding valves
XF system (Extra Fast) + XP system (Extra Power) + FL system (Full Lift)
RCH or RCS FASSI radio remote control with linear levers and pressure value display (in bar and %) and 90%/100% warning on display
Danfoss D900 control block with 4 control valves mounted on crane column
Emergency operation for crane control
High-pressure filter supplied piped
Separate hydraulic tank (260 l) with filter and oil cooler mounted on crane base
Hydraulic outriggers, extendable on both sides, support width 8.84 m
Supports operated via radio with proportional control block
IMC system (Integral Machine Control) and ADC (Automatic Dynamic Control) = load-dependent speed control
Standard color RAL 3020 traffic red - all cylinders painted black
Load hook and mounting clevises (short / 500 mm)
Travel position: boom folded transverse to vehicle direction
Note: Observe onboard voltage / 12V or 24V, standard 24V

FASSI Stability Control FSC-S/II 1
IE742 connection box
Low profile foundation
180° hydraulically upward-and-outward swinging support legs / both sides
Control system for auxiliary function - winch / xhe-dynamic
Control system for 2 auxiliary functions with 2 hose guides / xhe-dynamic

Prepared for operation with variable displacement pump (LS)
Work lights operable via display (1 b/w function)
1 LED work light mounted on knuckle boom
LEDs for 2 support legs, not mounted (crane)
LEDs for 2 support legs, not mounted (additional outriggers)
GR.15 electrical rotary distributor with 15 slip rings
FUNK-V7-RCS
Radio remote control V7 RCS
Fassi radio remote control V7S:
available with 6 or 8 functions, with linear levers or joysticks.
V7S with 4.3" color display / 24bit – 480 x 272 px, with 8 push buttons
Engine start/stop, speed up/down, 6 x ON/OFF functions, 10m cable and various working speed regulations, incl. spare battery, charger, neck and waist belt

廣告是自動翻譯的，翻譯中可能會出現一些錯誤。