伺服驱动袋成型机

Mamata Vega-Plus-610

Processing Specifications:

Maximum processing width: 610 mm
Minimum processing width: 210 mm
Maximum draw length without interruption: 610 mm or 410 mm, depending on configuration
Minimum draw length without interruption: 50 mm
Maximum draw length with interruption: 1,220 mm or 820 mm, depending on configuration
Minimum draw length with interruption: 100 mm
Maximum cycle rate: 210 cycles/min
Maximum line speed: 50 m/min

Unwinder:

Maximum reel diameter: Ø1,000 mm
Maximum reel weight: 700 kg
Web width with 48-inch unwinder: 410–1,220 mm
Web width with 60-inch unwinder: 410–1,520 mm

Processable Materials:

Polyester laminates: from 40 μm
BOPP laminates: from 40 μm
CPP laminates: from 40 μm
Nylon-based co-extruded films: from 50 μm
EVOH-based co-extruded films: from 50 μm
LD/LLD-based co-extruded films: from 50 μm
BOPP film: from 30 μm
Aluminum foil structures
Coated paper
Tyvek
Maximum sealable film thickness: 150 μm

Pouch Types:
• TSP pouches
• Stand-up pouches
• Supported-film pouches

Bodpfx Aozqt Dnsi Tjdi
Electrical Data:

Power supply: AC, 3 Phase
Available voltage: 20 / 240 / 380 / 415 / 480 V ±6%
Frequency: 50/60 Hz
Machine-specific supply: 380 V, 50 Hz, 3 Phase
Machine electrical load: 35 kVA

Pneumatic Requirements:

Air consumption: 1,000 L/min at NTP
Installed configuration air requirement: 3,000 L/min
Minimum operating pressure: 6 kg/cm²
Air supply must be free from moisture and dust

Cooling Water:

Water consumption: 20 L/min
Required water temperature: 15–17 °C

Standard Machine Features:
• Servo-driven film indexing
• Microprocessor-based control
• Operator console for process parameter settings
• Servo tension dancer assemblies with feedback control
• Tail-feed-assisted film draw mechanism
• Servo-driven reciprocating sealing system
• Servo-actuated sealing bars
• Progressive sealing and rapid seal-area cooling
• Three-stage bottom sealing followed by cooling
• Adjustable sliding sealing stations
• PID temperature controllers with auto-tuning
• Photo-registration mark scanner
• Guillotine-type shearing station with servo fine adjustment
• Trimming station with trim removal
• Recipe memory for frequently used jobs
• Adjustable sealing temperature, pressure and dwell time
• Automatic stacking system

该广告为自动翻译，可能存在翻译错误。