MAIR多头管材切割机 TRA3000/7/7/CAR + RA1MAIR
MULTIHEAD TUBE CUTTING MACHINE TRA3000/7/7/CAR ...
MAIR多头管材切割机 TRA3000/7/7/CAR + RA1
MAIR
MULTIHEAD TUBE CUTTING MACHINE TRA3000/7/7/CAR ...
状况
二手
位置
Madrid 

基本数据
- 制造商:
- MAIR
- 状况:
- 二手
价格和位置
- 位置:
- Madrid, Spain

拨打
优惠详情
- 广告编号:
- A21299832
- 参考编号:
- 4023
- 更新:
- 最近更新时间为 23.02.2026
描述
MULTIHEAD TUBE CUTTING MACHINE MAIR TRA3000/7/7/CAR + RA1
SCOPE OF SUPPLY
1 Loading table with:
- Motorised slings loader, to load the complete bundle
- Lateral chain transport conveyor, to introduce the tube 1 by 1
- Top support with vertical adjustment (to avoid loading of 2 tubes when working with small diameters)
- Length stop and tube loader
2 Cutting machine TRA3000 with:
- 7 independent cutting heads
- All cutting heads can be lifted independently
- Linear guide with scale for positioning of the cutting heads
- Centralised tube transport system with production cycle adjustment
3 Single collecting cradle RA1, with:
- Independent cradles, to collect the cut tubes
- Lateral separators between cradles, to adapt the cradle length to the tube length
- Motorised endless slings for soft tube collection.
4 Main electrical cabinet and operator control panel
5 Safety barriers around the machine & photelectric barriers & emergency line.
Note: Safety barriers were installed by owner to have the machine under “safety conformity”
TECHNICAL SPECIFICATIONS
Manufacturer: MAIR
Model: TRA 3000/7/7/CAR +RA1
Yearly maintenance: made by MAIR Spain
Max. input tube length: 7000 mm
Bundle Loader: 3 Tn
Max. loading capacity: 3000 Kg
Round tubes (outer Ø): 12-60 mm
Square tubes (HxW): 12x12-50x50 mm (see note)
Kedpfjymax Esx Acaodw
Rectangular tubes (HxW): 12x16-60x40 mm (see note)
Thickness Min-Max.: 0.8 - 4.0 mm (depending on yield)
Cutting lengths: 330-6900 mm
Max. straightness tolerance: 1 mm/m
Number of cutting heads: 7
Motors power: 2.2 kW
Cutting disc diameter: 300 mm
Voltage: 380 / 50 V/HZ, 3 phases
Compressed air: It must be supplied filtered and lubricated 6 bar
Total installed power: Aprox. 21kW – 50Amp
Manufacturer: MAIR
Model: TRA 3000/7/7/CAR +RA1
Yearly maintenance: made by MAIR
Max. input tube length: 7000 mm
Bundle Loader: 3 Tn
Max. loading capacity: 3000 Kg
Round tubes (outer Ø): 12-60 mm
Square tubes (HxW): 12x12-50x50 mm (see note)
Rectangular tubes (HxW): 12x16-60x40 mm (see note)
Thickness Min-Max.: 0.8 - 4.0 mm (depending on yield)
Cutting lengths: 330-6900 mm
Max. straightness tolerance: 1 mm/m
Number of cutting heads: 7
Motors power: 2.2 kW
Cutting disc diameter: 300 mm
Voltage: 380 / 50 V/HZ, 3 phases
Compressed air: It must be supplied filtered and lubricated 6 bar
Total installed power: Aprox. 21kW – 50Amp
SCOPE OF SUPPLY
1 Loading table with:
- Motorised slings loader, to load the complete bundle
- Lateral chain transport conveyor, to introduce the tube 1 by 1
- Top support with vertical adjustment (to avoid loading of 2 tubes when working with small diameters)
- Length stop and tube loader
2 Cutting machine TRA3000 with:
- 7 independent cutting heads
- All cutting heads can be lifted independently
- Linear guide with scale for positioning of the cutting heads
- Centralised tube transport system with production cycle adjustment
3 Single collecting cradle RA1, with:
- Independent cradles, to collect the cut tubes
- Lateral separators between cradles, to adapt the cradle length to the tube length
- Motorised endless slings for soft tube collection.
4 Main electrical cabinet and operator control panel
5 Safety barriers around the machine & photelectric barriers & emergency line.
Note: Safety barriers were installed by owner to have the machine under “safety conformity”
TECHNICAL SPECIFICATIONS
Manufacturer: MAIR
Model: TRA 3000/7/7/CAR +RA1
Yearly maintenance: made by MAIR Spain
Max. input tube length: 7000 mm
Bundle Loader: 3 Tn
Max. loading capacity: 3000 Kg
Round tubes (outer Ø): 12-60 mm
Square tubes (HxW): 12x12-50x50 mm (see note)
Kedpfjymax Esx Acaodw
Rectangular tubes (HxW): 12x16-60x40 mm (see note)
Thickness Min-Max.: 0.8 - 4.0 mm (depending on yield)
Cutting lengths: 330-6900 mm
Max. straightness tolerance: 1 mm/m
Number of cutting heads: 7
Motors power: 2.2 kW
Cutting disc diameter: 300 mm
Voltage: 380 / 50 V/HZ, 3 phases
Compressed air: It must be supplied filtered and lubricated 6 bar
Total installed power: Aprox. 21kW – 50Amp
Manufacturer: MAIR
Model: TRA 3000/7/7/CAR +RA1
Yearly maintenance: made by MAIR
Max. input tube length: 7000 mm
Bundle Loader: 3 Tn
Max. loading capacity: 3000 Kg
Round tubes (outer Ø): 12-60 mm
Square tubes (HxW): 12x12-50x50 mm (see note)
Rectangular tubes (HxW): 12x16-60x40 mm (see note)
Thickness Min-Max.: 0.8 - 4.0 mm (depending on yield)
Cutting lengths: 330-6900 mm
Max. straightness tolerance: 1 mm/m
Number of cutting heads: 7
Motors power: 2.2 kW
Cutting disc diameter: 300 mm
Voltage: 380 / 50 V/HZ, 3 phases
Compressed air: It must be supplied filtered and lubricated 6 bar
Total installed power: Aprox. 21kW – 50Amp
供應商
注意: 免费注册或登录,以获取所有信息。
注册于: 2022
83 在线广告
发送询价
电话 & 传真
+34 916 5... 广告
这些广告您可能也感兴趣。
成功
您的消息已发送。
小广告
Madrid
10,888 km
GUIDA 纵剪生产线 1500x6,将于2027年以全新状态供应
GUIDASlitting line 1500x6
GUIDASlitting line 1500x6
成功
您的消息已发送。
小广告
Beograd
8,960 km
分切生产线
GaspariniSlitter
GaspariniSlitter
成功
您的消息已发送。
小广告
Dresden
9,114 km
凸版印刷机
POLYGRAPHOM II
POLYGRAPHOM II
成功
您的消息已发送。
小广告
Gusselby
8,596 km
多 rip 锯
ARIDS-73
ARIDS-73
成功
您的消息已发送。
小广告
Castellbisbal
10,441 km
型腔电火花机床 (EDM)
AGIE CHARMILLESFORM 300
AGIE CHARMILLESFORM 300
成功
您的消息已发送。
小广告
Birmingham
9,914 km
折弯机
AdiraQHD-30060 – 6metre
AdiraQHD-30060 – 6metre
成功
您的消息已发送。
小广告
Wöllstadt
9,456 km
袋成型、填充和封口机
Impuls PackagingFlowpack Multitalent 304 BF 200/80/600 Q
Impuls PackagingFlowpack Multitalent 304 BF 200/80/600 Q
成功
您的消息已发送。
小广告
Berlin
9,059 km
封袋机
ZhouTai Bag Making machineAMD650-Z
ZhouTai Bag Making machineAMD650-Z
成功
您的消息已发送。
小广告
Nagykáta
8,894 km
布料裁剪机
LectraVector 5000
LectraVector 5000
成功
您的消息已发送。
小广告
Ciriè
9,829 km
纵剪及定尺剪切生产线
STAMSTAM-2000
STAMSTAM-2000
您的广告已成功删除
发生错误





































































































