木材粉碎机mütek
MGZ 630
木材粉碎机
mütek
MGZ 630
出厂年份
2025
状况
全新
位置
Neckartailfingen 

价格和位置
- 位置:
- Grienweg 38, 72666 Neckartailfingen, Deutschland

拨打
优惠详情
- 广告编号:
- A3961597
- 参考编号:
- MGZ 630
- 更新:
- 最近更新时间为 28.01.2026
描述
The ideal machine for shredding hardwood and softwood.
Another machine, available immediately (ex works Neckartailfingen).
Motor: 18.5 kW; 400 V - 50 Hz - 3 phase,
Knives: 14 + 2 pieces, 40x40mm, can be rotated multiple times,
Rotor diameter: 260 mm,
Control: Omron PLC,
Cutting chamber opening: 600 x 800 mm,
Hopper volume approx. 0.6 m³,
Hydraulically operated slide
Screen size optional (12 - 40mm)
Suction nozzle Ø 160 mm
Weight approx. 1,300 kg
Dimensions (l x w x h) approx. 1737 x 1167 x 1650 mm
The following options are available at an extra cost:
Pgsdpfxed E R D So Ac Dot
- Additional knife row + €1,990 net (28 instead of 14)
- Surcharge for four-sided segment bottom + €2,170 net
(prevents the slide from jamming. Recommended for materials with a thickness of less than 3 mm)
- Raise the shredder by 30 cm (preparation for a conveyor belt) + €1,980 net
- Inclined conveyor belt (discharge height approx. 220 cm) + €8,770 net
- Overband magnet + €5,980 net
- Control system for conveyor belt and overband magnet + €2,750 net
(start and stop synchronized with the shredder)
- Special bearing + €1,540 (rarely needed. Enclosed, even more stable rotor bearing. Possibly worth considering for sieves smaller than 15 mm or with a high proportion of fine material. If the bearings are lubricated with grease, this is not necessary if operated approximately every 2 weeks)
Requirements for the raw material:
- The moisture content (dry basis) must be below 30%
- Metals and mineral contaminants such as sand, stones, etc. lead to increased wear.
We would be happy to offer you a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight forwarder, and we will document the test with photos and videos.
该广告为自动翻译,可能存在翻译错误。
Another machine, available immediately (ex works Neckartailfingen).
Motor: 18.5 kW; 400 V - 50 Hz - 3 phase,
Knives: 14 + 2 pieces, 40x40mm, can be rotated multiple times,
Rotor diameter: 260 mm,
Control: Omron PLC,
Cutting chamber opening: 600 x 800 mm,
Hopper volume approx. 0.6 m³,
Hydraulically operated slide
Screen size optional (12 - 40mm)
Suction nozzle Ø 160 mm
Weight approx. 1,300 kg
Dimensions (l x w x h) approx. 1737 x 1167 x 1650 mm
The following options are available at an extra cost:
Pgsdpfxed E R D So Ac Dot
- Additional knife row + €1,990 net (28 instead of 14)
- Surcharge for four-sided segment bottom + €2,170 net
(prevents the slide from jamming. Recommended for materials with a thickness of less than 3 mm)
- Raise the shredder by 30 cm (preparation for a conveyor belt) + €1,980 net
- Inclined conveyor belt (discharge height approx. 220 cm) + €8,770 net
- Overband magnet + €5,980 net
- Control system for conveyor belt and overband magnet + €2,750 net
(start and stop synchronized with the shredder)
- Special bearing + €1,540 (rarely needed. Enclosed, even more stable rotor bearing. Possibly worth considering for sieves smaller than 15 mm or with a high proportion of fine material. If the bearings are lubricated with grease, this is not necessary if operated approximately every 2 weeks)
Requirements for the raw material:
- The moisture content (dry basis) must be below 30%
- Metals and mineral contaminants such as sand, stones, etc. lead to increased wear.
We would be happy to offer you a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight forwarder, and we will document the test with photos and videos.
该广告为自动翻译,可能存在翻译错误。
发送询价
电话 & 传真
+49 711 5... 广告
这些广告您可能也感兴趣。
成功
您的消息已发送。
小广告
Neckartailfingen
9,523 km
碎纸厂
mütekMGZ 630 H
mütekMGZ 630 H
成功
您的消息已发送。
小广告
Neumarkt in der Oberpfalz
9,347 km
供暖系统
Heizkessel Fröling 1250kwHeizkessel Fröling
Heizkessel Fröling 1250kwHeizkessel Fröling
成功
您的消息已发送。
小广告
Hradec Králové
9,023 km
油漆/喷漆室
Reinox450x235
Reinox450x235
成功
您的消息已发送。
小广告
斯洛文尼亚
9,257 km
全套锯(固定式)
Mebor - Complete sawmill lineVTZ 1400, BM 900, SCEL 1000/10, VR 800 S
Mebor - Complete sawmill lineVTZ 1400, BM 900, SCEL 1000/10, VR 800 S
成功
您的消息已发送。
小广告
德国
9,303 km
风能发电厂
VestasV52-MK3
VestasV52-MK3
成功
您的消息已发送。
小广告
Heteren
9,533 km
钩臂系统
VolvoFMX 500 FMX 500 8x4 HIAB 422 E-8 Hipro + HIAB H...
VolvoFMX 500 FMX 500 8x4 HIAB 422 E-8 Hipro + HIAB H...
成功
您的消息已发送。
小广告
Lagedi
8,096 km
立体压榨容器
HusmannST- SEN
HusmannST- SEN
成功
您的消息已发送。
小广告
意大利
9,680 km
裁板锯 - 从前面装载
BIESSESEKTOR 450
BIESSESEKTOR 450
成功
您的消息已发送。
小广告
Fuldatal
9,345 km
折弯机
JUTEC6000D
JUTEC6000D
成功
您的消息已发送。
小广告
Berlin
9,060 km
切割机
RobustFSM 2S 17N
RobustFSM 2S 17N
您的广告已成功删除
发生错误






















































































































