压块机/压块机mütek Systemtechnik
MPP 110
压块机/压块机
mütek Systemtechnik
MPP 110
製造年份
2026
狀況
全新
位置
Neckartailfingen 

顯示圖片
显示地图
机器数据
价格和位置
- 位置:
- Grienweg 38, 72666 Neckartailfingen, Deutschland

撥打
优惠详情
- 產品ID:
- A4332239
- 最後更新:
- 於 05.12.2025
描述
Production time of the machine approx. 3.5 months
Very robust machine with high pressing force
- is also suitable for producing a saleable briquette quality *depending on the material. The large press cylinder and the 65 mm briquette make this possible.
Our best-selling briquetting press series
+ Tried and tested, simple technology, for extremely low susceptibility to faults
+ 25 years of experience, further development and know-how
+ Several thousand machines in use with satisfied customers
Iaedsffh Atspfx Afusl
+ Good price-performance ratio
Options:
Surcharge for cooling unit + € 3,995 net, (can also be retrofitted later)
* cools the press tongs (important from 3.5 hours) and the hydraulic oil
* Cooling unit recommended for regular operation of more than 3.5 hours at a time.
Large pre-compressor chamber + € 1,975 net
recommended for light starting materials such as wood shavings
Product code: 84793010
Briquette diameter: 65 mm
Front bush: 65 mm
Briquette stroke max.: 50 mm
Briquette stroke opt.: 50 mm
Output (depending on material): up to 110 kg/h*
approx. 87 kg/h in the last test.
*depending on the bulk density
*based on a bulk weight of 200 kg per cubic meter
.
Motor power: 5.5 kW
400 Volt / 50 Hz / 3-phase
Length: 1925 mm
Width: 1100 mm
Height: 1500 mm
Weight: 800 kg
Oil volume: 110 liters
Silo diameter: 1000 mm
Silo capacity: approx. 0.7 qbm
Pump: 37 liters
Hydraulic pre-compressor
Cooling press tongs option: yes, with special accessory Coolable press tongs
Cooling of the pressing tongs via water tank (to be procured on site)
Hydraulic oil cooling option: yes
Fill level monitoring option: yes
Briquette option: yes (depending on material)
CE compliant
.
Requirements for the raw material:
- The moisture content (atro) must be between a minimum of 6 and a maximum of 18 %
- Chip length maximum 15 mm
- Installation temperature: tempered room at a minimum of +5°C
- The feed must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and / or increased wear may result
廣告是自動翻譯的,翻譯中可能會出現一些錯誤。
Very robust machine with high pressing force
- is also suitable for producing a saleable briquette quality *depending on the material. The large press cylinder and the 65 mm briquette make this possible.
Our best-selling briquetting press series
+ Tried and tested, simple technology, for extremely low susceptibility to faults
+ 25 years of experience, further development and know-how
+ Several thousand machines in use with satisfied customers
Iaedsffh Atspfx Afusl
+ Good price-performance ratio
Options:
Surcharge for cooling unit + € 3,995 net, (can also be retrofitted later)
* cools the press tongs (important from 3.5 hours) and the hydraulic oil
* Cooling unit recommended for regular operation of more than 3.5 hours at a time.
Large pre-compressor chamber + € 1,975 net
recommended for light starting materials such as wood shavings
Product code: 84793010
Briquette diameter: 65 mm
Front bush: 65 mm
Briquette stroke max.: 50 mm
Briquette stroke opt.: 50 mm
Output (depending on material): up to 110 kg/h*
approx. 87 kg/h in the last test.
*depending on the bulk density
*based on a bulk weight of 200 kg per cubic meter
.
Motor power: 5.5 kW
400 Volt / 50 Hz / 3-phase
Length: 1925 mm
Width: 1100 mm
Height: 1500 mm
Weight: 800 kg
Oil volume: 110 liters
Silo diameter: 1000 mm
Silo capacity: approx. 0.7 qbm
Pump: 37 liters
Hydraulic pre-compressor
Cooling press tongs option: yes, with special accessory Coolable press tongs
Cooling of the pressing tongs via water tank (to be procured on site)
Hydraulic oil cooling option: yes
Fill level monitoring option: yes
Briquette option: yes (depending on material)
CE compliant
.
Requirements for the raw material:
- The moisture content (atro) must be between a minimum of 6 and a maximum of 18 %
- Chip length maximum 15 mm
- Installation temperature: tempered room at a minimum of +5°C
- The feed must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and / or increased wear may result
廣告是自動翻譯的,翻譯中可能會出現一些錯誤。
这些广告您可能也感兴趣。
小广告
Gais
9,450 km
PTO 轴 - 碎木机、碎木机
BruggerPX130
BruggerPX130
小广告
Cassolnovo
9,742 km
车床
GildemeisterCTX 420 V6
GildemeisterCTX 420 V6
小广告
Neckartailfingen
9,523 km
带有除尘系统的打包机
mütek
mütek
小广告
Wolkersdorf im Weinviertel
9,067 km
三坐标测量机
Aberlink /RenishawAzimuth
Aberlink /RenishawAzimuth
小广告
Sesto Calende
9,731 km
2014 豪迈 Kal 210 Ambition 2264
HomagKal 210 Ambition 2264
HomagKal 210 Ambition 2264
小广告
Bitburg
9,610 km
吸管磁力分离器 180 mm
Epper222210
Epper222210
小广告
Egenhofen
9,423 km
压块机
FalachFalach 35
FalachFalach 35
小广告
Malax
8,145 km
RANDEK SP700 切割锯
RandekSP700
RandekSP700
小广告
Uttendorf
9,301 km
CNC 车铣加工中心
MazakINTEGREX i 250H S
MazakINTEGREX i 250H S
小广告
Zevenbergen
9,616 km
带 Y 轴、驱动的 CNC 车床。周
Mori SeikiNL 2500 SY / 1250
Mori SeikiNL 2500 SY / 1250
您的广告已成功删除
发生错误


























































































