冬季服务设备 / 撒盐机Kugelmann
Sand und Salzsteuer Duplex Inox
冬季服务设备 / 撒盐机
Kugelmann
Sand und Salzsteuer Duplex Inox
VB 不含增值税
€15,400
出厂年份
2018
状况
二手
(完全功能)
位置
Heidelberg 

机器数据
价格和位置
VB 不含增值税
€15,400
- 出租:
- 可能
- 位置:
- Tullastr. 3, 69126 Heidelberg, Deutschland

拨打
优惠详情
- 广告编号:
- A22176557
- 更新:
- 最近更新时间为 22.06.2026
描述
Duplex Inox
KUGELMANN Spreader, 550-liter capacity, Type SDB105H063L120KHKAVA
- Painted in RAL 2004 Holder Orange
- Stainless steel design – container and sheet metal parts made of stainless steel, glass bead blasted and coated with a special paint.
- Speed-dependent spreader
- 2 augers and speed-dependent control
- Stainless steel design – container and sheet metal parts made of stainless steel, glass bead blasted and coated with a special paint.
- Color: Holder Orange
Basic Duplex spreader:
- Speed-dependent, twin-chamber mounted spreader with an extremely low center of gravity, two longitudinal augers with independent hydraulic drive as a conveying and metering device, the spreading disc is also hydraulically driven, the augers and spreading disc are separate and can be regulated independently in a closed-loop system (with feedback).
- The application rate and spreading width are controlled via a microcomputer.
- The set spreading rate is speed-dependent and controlled according to the vehicle speed.
- For rapid emptying, transport, and assembly work, the discharge chute with spreader can be folded upwards.
Standard equipment:
- Microprocessor control unit MCSS (for operation)
- Work lights can be switched on from the control panel
- Rotating beacon can be switched on from the control panel
- Partition between the spreading material chambers with equal division of the chamber volume (removable)
- Rubber skirting attached to the discharge chute
- Folding cover including operating cables
- Winter service marking
- Manual emergency operation of the hydraulic control valves (for operating the drives without control)
- Prepared for wet salt system (retrofitting only possible at the factory)
- Lighting system
- Angled roof frame
- Mounting frame and initial assembly of the spreader on the vehicle
Nedpfxezf E Hqe Akaewh
- Rotating beacon and work lights
- Pre-carriage from the factory
- Mounting kit Holder
LIST PRICE: € 22,515 (plus applicable VAT)
YOUR SPECIAL NET PRICE: € 15,400 (plus applicable VAT)
The following option is available at an extra cost:
Additional cost for outrigger legs, 3 tons: € 990 (plus applicable VAT)
Subject to changes, typographical errors, errors and prior sale. All information is provided without guarantee.
The sale is made with the exclusion of any guarantee or warranty.
该广告为自动翻译,可能存在翻译错误。
KUGELMANN Spreader, 550-liter capacity, Type SDB105H063L120KHKAVA
- Painted in RAL 2004 Holder Orange
- Stainless steel design – container and sheet metal parts made of stainless steel, glass bead blasted and coated with a special paint.
- Speed-dependent spreader
- 2 augers and speed-dependent control
- Stainless steel design – container and sheet metal parts made of stainless steel, glass bead blasted and coated with a special paint.
- Color: Holder Orange
Basic Duplex spreader:
- Speed-dependent, twin-chamber mounted spreader with an extremely low center of gravity, two longitudinal augers with independent hydraulic drive as a conveying and metering device, the spreading disc is also hydraulically driven, the augers and spreading disc are separate and can be regulated independently in a closed-loop system (with feedback).
- The application rate and spreading width are controlled via a microcomputer.
- The set spreading rate is speed-dependent and controlled according to the vehicle speed.
- For rapid emptying, transport, and assembly work, the discharge chute with spreader can be folded upwards.
Standard equipment:
- Microprocessor control unit MCSS (for operation)
- Work lights can be switched on from the control panel
- Rotating beacon can be switched on from the control panel
- Partition between the spreading material chambers with equal division of the chamber volume (removable)
- Rubber skirting attached to the discharge chute
- Folding cover including operating cables
- Winter service marking
- Manual emergency operation of the hydraulic control valves (for operating the drives without control)
- Prepared for wet salt system (retrofitting only possible at the factory)
- Lighting system
- Angled roof frame
- Mounting frame and initial assembly of the spreader on the vehicle
Nedpfxezf E Hqe Akaewh
- Rotating beacon and work lights
- Pre-carriage from the factory
- Mounting kit Holder
LIST PRICE: € 22,515 (plus applicable VAT)
YOUR SPECIAL NET PRICE: € 15,400 (plus applicable VAT)
The following option is available at an extra cost:
Additional cost for outrigger legs, 3 tons: € 990 (plus applicable VAT)
Subject to changes, typographical errors, errors and prior sale. All information is provided without guarantee.
The sale is made with the exclusion of any guarantee or warranty.
该广告为自动翻译,可能存在翻译错误。
供應商
注意: 免费注册或登录,以获取所有信息。
上次在线:上周
注册于: 2005
23 在线广告
发送询价
电话 & 传真
+49 172 6... 广告
您的广告已成功删除
发生错误








