KBA40/11000Jansen Maschinen GmbH
KBA40/11000
KBA40/11000
Jansen Maschinen GmbH
KBA40/11000
出厂年份
2017
状况
二手
(完全功能)
位置
Rastdorf 

基本数据
价格和位置
- 位置:
- Rastdorf, 德国

拨打
技术细节
主轴
主轴速度(最大):
3,000 转/分
功率详情
输入电压:
380 V
输入电流类型:
三相
文件和认证
文档 / 手册
可加工材料/产品
工件重量(最大):
3,500 千克
轴规格
X轴行程:
11,000 毫米
Y轴行程:
500 毫米
Z轴移动距离:
500 毫米
Z轴快速移动:
5 米/分钟
X轴快进:
20 米/分钟
Y轴快速移动:
10 米/分钟
更多详细信息
穿孔能力:
40 毫米
转速可无级变速
优惠详情
- 广告编号:
- A23345423
- 更新:
- 最近更新时间为 17.11.2026
描述
The CNC drilling machine KBA 40 is a development specifically designed for craft businesses and metalworking companies. Time-consuming measuring, marking, and center-punching are no longer necessary.
Efficiency and quality are the primary focus of this machine. The machine is Made in Germany, and the components used are from well-known national manufacturers.
The used machine consists of 3 table modules with a travel distance of 11,000 mm.
The coolant supply is provided by a 20-liter reservoir tank in the drilling table. A feed pump transports the coolant emulsion to the drill bit. An internal pipe system returns the emulsion to the tank.
Technical data:
Drilling capacity in S355: Ø40mm
Thread drilling capacity: M30
Spindle power: 9.40 KW
Spindle speed: 3000 min-1
Spindle mount: SK40 DIN 69871-1
Travel X: 3,300mm - 18,900mm
Maximum travel speed: 20m/min
Travel Y: 500mm
Maximum travel speed: 10m/min
Travel Z: 500mm
Maximum travel speed: 5m/min
Iisdpfxe Akrkte Ah Aoi
Table height: 825mm
Repeat accuracy: +/- 0.1mm/m
Traveling tool changer
The tool changer can hold 10 tools. Because the tool changer is mounted on the X-axis and moves with it, the tool change can always be performed in place.
Lifting roller track system
- with 10 mm lift
- with ball-bearing rollers
- roller width 500 mm
- roller diameter 60 mm
- roller spacing approx. 600 mm
- lifting force per roller 200 kg
Each roller is equipped with 2 mounted rocker arms. The lifting movement is generated via tie rods with an upstream pneumatic cylinder drive.
The roller track is prepared for mounting on the T-slots of the drilling table.
Each unit consists of 6 lifting roller systems with a pneumatic drive and is designed for the length of a drilling table.
该广告为自动翻译,可能存在翻译错误。
Efficiency and quality are the primary focus of this machine. The machine is Made in Germany, and the components used are from well-known national manufacturers.
The used machine consists of 3 table modules with a travel distance of 11,000 mm.
The coolant supply is provided by a 20-liter reservoir tank in the drilling table. A feed pump transports the coolant emulsion to the drill bit. An internal pipe system returns the emulsion to the tank.
Technical data:
Drilling capacity in S355: Ø40mm
Thread drilling capacity: M30
Spindle power: 9.40 KW
Spindle speed: 3000 min-1
Spindle mount: SK40 DIN 69871-1
Travel X: 3,300mm - 18,900mm
Maximum travel speed: 20m/min
Travel Y: 500mm
Maximum travel speed: 10m/min
Travel Z: 500mm
Maximum travel speed: 5m/min
Iisdpfxe Akrkte Ah Aoi
Table height: 825mm
Repeat accuracy: +/- 0.1mm/m
Traveling tool changer
The tool changer can hold 10 tools. Because the tool changer is mounted on the X-axis and moves with it, the tool change can always be performed in place.
Lifting roller track system
- with 10 mm lift
- with ball-bearing rollers
- roller width 500 mm
- roller diameter 60 mm
- roller spacing approx. 600 mm
- lifting force per roller 200 kg
Each roller is equipped with 2 mounted rocker arms. The lifting movement is generated via tie rods with an upstream pneumatic cylinder drive.
The roller track is prepared for mounting on the T-slots of the drilling table.
Each unit consists of 6 lifting roller systems with a pneumatic drive and is designed for the length of a drilling table.
该广告为自动翻译,可能存在翻译错误。
供應商
注意: 免费注册或登录,以获取所有信息。
最后在线:昨天
注册于: 2026
2 在线广告
发送询价
电话 & 传真
+49 5956 ... 广告
您的广告已成功删除
发生错误














