压实机

Hosokawa Alpine APC L200/50 (RENTAL UNIT)

A HOSOKAWA ALPINE Originals machine
Refurbished by the original manufacturer
Use of original components only
Original manufacturer warranty
Guaranteed manufacturer spare parts supply
Short lead time
Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs
Possibility to provide all additionally required peripherals or adapt to existing production plant

Refurbished Pharmapaktor APC L200/50.
The machine was previously used as a demo and rental unit.
Iisdofhmmxjpfx Af Aeh

Compacting head
Two cast stainless steel H-frames connected by spacer bolts. Two laterally foldable swing arms for easy and quick changing of the rollers. The swing arms are fixed with two tie rods, which also absorb the compressive forces of the compacting rollers. One chamber insert for guiding the product flow and two center pieces for sealing the rollers.

Pre-compaction unit
The pre-compaction unit is mounted on a supporting column and can be lifted and swivelled to the side. The charging hopper (with 2 brake bars) is equipped with a cylindrical/conical precompression screw. When the pre-compaction unit is lifted off, a limit switch switches off the compacting rollers and the screw.

Materials and surfaces
In contact with product: 316 L stainless steel. (1.4404)
Ra ᐸ1.2 μm
not in contact with product: stainless steel 304 (1.4301)
Ra ᐸ1,2μm

Drives
Three-phase current geared motors
Technical data rolls
Nominal power (kW): 4,0
Speed (rpm) 3 - 30
voltage: 400 V, 50 Hz
Protection class: IP 55

Compacting rollers
The rollers for the PHARMAPAKTOR are made of hardened stainless steel.
Rollers, roller bearings and bearing seals form a complete unit and are delivered fully assembled. It is therefore not necessary to dismantle the bearings to change the rolls.
Roller profile: At your choice
roller diameter: 200 mm
roller width: 50 mm
roller gap: 2.5 mm