窗户系统

GUBISCH CW 2

Tenoning spindle 1 St.
Number of milling agregates 4 St.
Spindle diameter 50 mm
1 GUBISCH – CENTROMAT CW 2
will be sold on behalf of our customer, ex location
-----

Manufacturer description:
-----
For window and door production, with 50 mm spindle diameter in
longitudinal profiling. With the following processing stations and options:

- Slotting machine on one side for straight and angled connections Milling
machine
for longitudinal profiling
- Rebating operation with synchronous milling unit and automatic plunge.
Pivoting frame support up to 650 mm
- Central control

1.0 cross-cut saw automatically plunges from above
-----
Motor power, including motor brake: 3.0 kW
Spindle speed: 2,800 rpm.
Cutting circle diameter: 350 mm diameter
Spindle diameter: 30 mm diameter
Clamping flange, 1 driver 6 mm diameter TK 42, 120 mm diameter
Pneumatic vertical stroke: 100 mm
Pneumatic horizontal stroke: 160 mm
against 2 manually adjustable 6-way turret stops
Chip extraction hood with extraction nozzle 100 mm diameter

2.0 slot unit
-----
Motor power, including motor brake: 9.2 kW
Spindle speed: 3,800 rpm
Flight circle diameter: 320 mm diameter
Spindle diameter: 50 mm diameter
Usable spindle length: 320 mm
Pneumatic vertical stroke fixed: 2 x 100 mm
Suitable for 3 tool sets of 100 mm each
Zero height: 10 mm
Chip extraction hood with extraction nozzle: 160 mm diameter

3.0 Slotting table
-----
Gbjdpfx Ajw I Eawocvjg
Table height above floor 920 mm
Feed for 4 speeds freely adjustable:
- 1. Milling, slanting window and typing speed can be set in the table
(approx. 7 m/min.)
- 2. Sawing speed approx. 7 m/min. (can be set on the device)
- 3. Transfer speed approx. 10 m/min. (can be set on the device)
- 4. Return speed/without processing approx. 25 m/min. (can be set on the
device)
- Motor power, including motor brake 0.37 kW
Workpiece clamping pneumatic Pendulum pressure shoes
Workpiece clamping pneumatic
1 clamping cylinder with 2 additional pressure shoes

3.1 Counter wood device Counter wood changer with 2-way automatic change and
then with manual. Rotation of 180 degrees, 2 further counters possible, which
then
also counter in automatic mode

3.2 Length stop
-----
- Stop system with 3 scales for
- a) outside frame
- b) outside sash upright
- c) outside sash crosswise Adjustment manually
- Length with attachable extension 3000 mm
- for sloped windows, pivotable +/- 60 degrees 3.3 Angle transfer -
automatic via vertically clocked feed roller in the milling feed

4.0 Milling machine For longitudinal profiling and rebating of windows/doors
with

the following units:
-----

4.1 First profile milling unit
-----
- Counter-rotation
- Synchronous rotation with automatic plunge can be used for rebating
- Motor power including motor brake: 9.2 kW
- Spindle speed: 6000 rpm.
- Cutting circle diameter: 240 mm max.
- Spindles adjustable for zero diameter 140 mm max.
- of tools 112 mm min.
- Zero height: 10 mm
- Spindle diameter: 50 mm diameter
- Spindle usable length: 320 mm
- Vertical stroke pneumatically fixed,
- suitable for 4 tool sets of 80 mm each, 3 x 80 mm
- Horizontal stroke pneumatic: 80 mm
- Chip e...