颗粒机Gránit-Mill
颗粒机
Gránit-Mill
固定价格 不包含增值稅
€29,900
狀況
二手
位置
Cegléd 

顯示圖片
显示地图
机器数据
价格和位置
固定价格 不包含增值稅
€29,900
- 位置:
- Cegléd, 2700 Magyarország
撥打
优惠详情
- 產品ID:
- A13597264
- 最後更新:
- 於 13.06.2024
描述
We offer for sale the following Gránit-Mill 90 wood pelletizing presses, in the condition shown in the pictures, after the pelletizing plant has ceased operation.
The machine is made in Hungary, our company has an excellent relationship with the manufacturer, and we can help you purchase parts.
Drive and sticker handling is similar to the old CPM machines.
Gujdpfx Asp T Twuof Ajh
The presses (with pine) are capable of 1.2-1.5 t/h/pc.
Price:
€29 900/press
€49 900/ 2 presses
Included in the price:
pre-tank
control cabinet
dosing screw
permanent magnet
conditioner
press
motors
pre-tank 1.1 kW
feeder 1.5 kW
conditioner 15 kW
tablecloth 0.55 kW
main engine 90 kW
3 stickers
all three are made by La Meccanica
barely used
It has a 6 x 45 mm hole for pine
2 sets (total of 4) notched collars
spare parts
screws
nuts
breaker pin
assembly aids
Status:
Engines and drives intact.
Both machines tested. It is recommended to replace the neck bearing of the right machine.
Smaller parts (such as the pellet cutter) must be replaced.
There is no water supply, the place is prepared.
The greasing method is manual, but central greasing can be easily installed.
Summary:
The machine on the left can be put into production immediately.
It requires a minor service on the right side.
If necessary, the machine can be tested at a pre-arranged time. Not in production, must be prepared. It is possible to check the mechanical durability and volume density of the produced pellets on site!
The machine is made in Hungary, our company has an excellent relationship with the manufacturer, and we can help you purchase parts.
Drive and sticker handling is similar to the old CPM machines.
Gujdpfx Asp T Twuof Ajh
The presses (with pine) are capable of 1.2-1.5 t/h/pc.
Price:
€29 900/press
€49 900/ 2 presses
Included in the price:
pre-tank
control cabinet
dosing screw
permanent magnet
conditioner
press
motors
pre-tank 1.1 kW
feeder 1.5 kW
conditioner 15 kW
tablecloth 0.55 kW
main engine 90 kW
3 stickers
all three are made by La Meccanica
barely used
It has a 6 x 45 mm hole for pine
2 sets (total of 4) notched collars
spare parts
screws
nuts
breaker pin
assembly aids
Status:
Engines and drives intact.
Both machines tested. It is recommended to replace the neck bearing of the right machine.
Smaller parts (such as the pellet cutter) must be replaced.
There is no water supply, the place is prepared.
The greasing method is manual, but central greasing can be easily installed.
Summary:
The machine on the left can be put into production immediately.
It requires a minor service on the right side.
If necessary, the machine can be tested at a pre-arranged time. Not in production, must be prepared. It is possible to check the mechanical durability and volume density of the produced pellets on site!
您的广告已成功删除
发生错误