注塑机ENGEL
VICTORY 200/60 Power
注塑机
ENGEL
VICTORY 200/60 Power
出厂年份
2003
状况
二手
位置
Škofja Loka 
机器数据
价格和位置
- 位置:
- Trata 49, 4220 Škofja Loka, Slovenija
拨打
优惠详情
- 广告编号:
- A22085988
- 更新:
- 最近更新时间为 09.06.2026
描述
VICTORY 200/60 Power
SN 162699
Closing force (kN) 600 (expandable to 800 kN)
Year of manufacture: 2003
Screw diameter 30.00 mm, L/D ratio of the mixing cylinder 20.50
Operating hours: ONLY 6,500
Vertically enlarged clamping plates (B-plates)
Ksdpfx Aezcanfsmljdn
Swiveling reject chute for reject selection, activated upon reject detection
Version variant HV 2 with control pumps (pressure and flow control in a closed-loop control system)
for parallel movement sequence
Microcomputer CC100 A03
Kistler 5155 A2213Q02 charge amplifier with automatic switching pressure detection
4x digital output, 4x digital input
Interface for temperature control units or hot runner controllers
Data protocol Engel, physical type 20 mA – CL
Microflow
MINI-CAM - Process parameter adjustment support based on an expert system
1x service socket, 2-pole, 230V
4x 3-phase socket, 10A / 16A
2x 3-phase socket, 10A / 16A, switchable
2/2-way solenoid air valve, R1/4 inch
Flow regulator 0-10 l, 8 circuits
Temperature control circuits can be switched off manually or automatically (centrally at the flow controller) – Switch-off function selectable.
该广告为自动翻译，可能存在翻译错误。
SN 162699
Closing force (kN) 600 (expandable to 800 kN)
Year of manufacture: 2003
Screw diameter 30.00 mm, L/D ratio of the mixing cylinder 20.50
Operating hours: ONLY 6,500
Vertically enlarged clamping plates (B-plates)
Ksdpfx Aezcanfsmljdn
Swiveling reject chute for reject selection, activated upon reject detection
Version variant HV 2 with control pumps (pressure and flow control in a closed-loop control system)
for parallel movement sequence
Microcomputer CC100 A03
Kistler 5155 A2213Q02 charge amplifier with automatic switching pressure detection
4x digital output, 4x digital input
Interface for temperature control units or hot runner controllers
Data protocol Engel, physical type 20 mA – CL
Microflow
MINI-CAM - Process parameter adjustment support based on an expert system
1x service socket, 2-pole, 230V
4x 3-phase socket, 10A / 16A
2x 3-phase socket, 10A / 16A, switchable
2/2-way solenoid air valve, R1/4 inch
Flow regulator 0-10 l, 8 circuits
Temperature control circuits can be switched off manually or automatically (centrally at the flow controller) – Switch-off function selectable.
该广告为自动翻译，可能存在翻译错误。
供應商
注意： 免费注册或登录，以获取所有信息。
注册于: 2021
10 在线广告
发送询价
电话 & 传真
+386 31 7... 广告
这些广告您可能也感兴趣。
小广告
Wien
9,088 km
ES 330/80 HLS
ENGELES 330/80 HLS
ENGELES 330/80 HLS
小广告
Metzingen
9,525 km
工具铣床 - 通用
Deckel MahoDMU 50 M - TNC 124
Deckel MahoDMU 50 M - TNC 124
小广告
Schwaigern
9,508 km
注塑机
ENGELE-max 200/100 Reinraum
ENGELE-max 200/100 Reinraum
小广告
Anderstorp
8,795 km
注塑机
ENGELES 200/90 HL
ENGELES 200/90 HL
小广告
Škofja Loka
9,330 km
注塑机
ENGELVC330-80 plus
ENGELVC330-80 plus
小广告
Trenčianske Stankovce
8,946 km
恩格尔 victory 200/50 spex（2010年）
Engelvictory 200/50 spex
Engelvictory 200/50 spex
小广告
Uttendorf
9,301 km
注塑机
ENGELES 200 - 50 HL
ENGELES 200 - 50 HL
小广告
Trenčianske Stankovce
8,946 km
恩格尔 INSERT 200H/40 立式旋转台（2004 年）
EngelINSERT 200H/40
EngelINSERT 200H/40
小广告
Trenčianske Stankovce
8,946 km
Engel INSERT 330H/90 (2004) 垂直旋转台 1100mm
EngelINSERT 330H/90
EngelINSERT 330H/90
小广告
Muttenz
9,688 km
注塑机
ENGELVICTORY 80/25 TECH
ENGELVICTORY 80/25 TECH
您的广告已成功删除
发生错误
Machineseeker-信任认证标志
什么是可信印章？
Machineseeker通过Machineseeker信任标志认证精选经销商。 在发放之前，Machineseeker 经验丰富的员工会进行标准化和全面的检测。
我们检查什么？
检查
营业执照或商业登记摘录
检查经销商的
邮寄地址
银行账户信息验证
主电话号码的
电话
可接通性验证
企业信用报告
不得显示任何负面特征
买家的投诉
可能导致认证标志被撤销这对您作为买家意味着什么？
通过 Machineseeker 信任标识，您作为买家无需自行检查，就可以识别出极有可能进行诚信且合法经营的可信经销商。
当然，在购买过程中仍可能出现分歧。 Machineseeker 对在 Machineseeker 上活跃的买家或卖家的法律违规行为不承担责任。