角式压缩机

Comptrade CTP-S-550E3

This offer concerns a beautiful Comptrade CTP-S-550E3 diving compressor. The compressor comes with an external filling panel for diving cylinders (5 x 300 bar and 1 x 200 bar). The lever valves were replaced in 2025/2026. I am also including a 50-liter air cylinder.
This is a great set, practically ready to use. You just need to connect the electrical wires to the filling panel, and you can start working immediately!!!
PERFORMANCE: 550 liters/min
Engine speed: 1250 rpm
Dimensions: 136/80 cm (width/depth), 180 cm (height)
Weight: 450 kg
Rated power: 11 kW
RUNNING HOURS: Only 1158 hours
I have my own transport available. Price from 96-100 EUR, starting from Skierniewice, Poland, to your location, plus 0.33 EUR per kilometer one way.

TECHNICAL DATA OF THE COMPRESSOR
Medium: breathing air according to DIN 3188 / EN 12021: 2014
Inlet pressure (bar, absolute pressure): 1 + 0.2
Nominal working overpressure (max. bar): 420
Number of compression stages: 4
Number of cylinders: 4
Diameter of 1st stage cylinder (mm): 130
Diameter of 2nd stage cylinder (mm): 60
Diameter of 3rd stage cylinder (mm): 32
Diameter of 4th stage cylinder (mm): 14
Piston stroke (mm): 50
Interstage overpressures:
1st stage (approx. bar): 2.5 – 3.5
2nd stage (approx. bar): 15 – 17
3rd stage (approx. bar): 70 – 75
4th stage (approx. bar): 225 – 400
Air-cooled
Lubrication: oil pump
Oil quantity (l): 3.8
Type of oil: synthetic oil
Permissible ambient temperature: +5°C to +45°C
Permissible inclination: 5°
Frequency of condensate removal: every 10–15 minutes
DRIVE MOTOR: three-phase induction motor (E3) 3×400 V / 50 Hz, 2900 rpm, B3 design, IP 55
Equipment:
compressor and motor mounted on a frame equipped with vibration damping elements; the lightweight frame design allows for easy replacement of the drive unit.
micron-type inlet filter
forced lubrication (oil pump)
interstage coolers, final cooler, final mechanical separator for removing oil-water condensate
visual oil level indicator on the compressor block
final safety valve (set at 225 bar or 330 bar), check valve, thermal motor protection switch, automatic star-delta starting system
Fpjdpfx Aez Rmvceiljn

FILLING PANEL WITH SIX OUTLETS (5 x 300 OR 1 x 200 BAR)
AUTOMATIC SHUT-OFF SYSTEM (AUTO-STOP)
AUTOMATIC CONDENSATE DRAIN SYSTEM
removal of condensate from all interstage separators and the final separator during compressor operation
integrated pressure relief starting system (automatic drain upon each device shutdown)
condensate tank with a capacity of approximately 5 liters
noise dampers, timer to optimize the frequency of condensate draining

FILTRATION SYSTEM F 2400
transparent COMP TRADE filter cartridge with extended life and saturation indicator; three-stage filtration (drying, neutralization, microfiltration)
air quality in accordance with DIN 3188 / EN 12021: 2014 standards
filling: MS-AC-MS (ensures air quality in accordance with DIN 3188 / EN 12021: 2014)
filter capacity (air volume): 2400 m³ (at an ambient temperature of 20°C)

COMPTROL 1
oil level control system with automatic shut-off function and reset button (activation when the minimum oil level is reached in the compressor block); oil level indicator located at the front of the frame.
COMPTROL 2
temperature control system with automatic shut-off function and reset button (activation when the maximum temperature is reached in the last stage of compression)

该广告为自动翻译，可能存在翻译错误。