钻孔机Collet
RS 2-1
技术细节
- 钻孔深度:
- 710 毫米
- 最大转速:
- 1,250 转/分
- 主轴直径:
- 100 毫米
- 桌面长度:
- 1,120 毫米
- 工作台宽度:
- 1,250 毫米
提供
- 位置:
- Nordrhein-Westfalen, 德国
– 距离：约 9,469 公里
- 可用性:
- 拍卖结束后立即
- 交付条件:
- FCA
€3,400.00 (约束性)
免费
描述
By placing a bid, you commit to collecting the machine by 28.01.2026! A timely appointment is necessary after the auction ends, as the machine has not yet been dismantled!
TECHNICAL DETAILS
Working spindle diameter: 100 mm
Working spindle taper bore: ISO steep taper No. 50
Drilling depth in one pass: 710 mm
Lowest position of spindle center above table surface: 0 mm
Highest position of spindle center above table surface: 1,200 mm
Maximum distance between spindle sleeve and tailstock: 2,300 mm
Horizontal travel of tailstock: 1,300 mm
Spindle speed: 6 - 1,250 rpm
Clamping surface of the table: 1,120 mm x 1,250 mm
Longitudinal travel of the table: 1,300 mm
Transverse travel of the table: 1,200 mm
34 feed rates for spindle, headstock, and table: 0.017 - mm/rev.
Feed rates for headstock and table, stepless: 20 - 1,000 mm/min
Rapid traverse for all axes: 2,800 mm/min
MACHINE DETAILS
Main motor power: 11 kW
Main motor speed: 1,450 rpm
Current type: Three-phase
Voltage: 380 Volt
Frequency: 50 Hz
EQUIPMENT
Documentation incl. wiring diagram
Circuit diagrams
Operating manuals
Note: Brake defective, clutch dismounted (included). Repair costs in Germany approx. €3,000.
廣告是自動翻譯的，翻譯中可能會出現一些錯誤。
支付处理
- 购买附加费用:
- 18 %
- 付款条件:
- 100% 预付款
- 支付方式:
银行转账
优惠详情
- 產品ID:
- A20746757
- 參考編號:
- AUC-2512082
- 最後更新:
- 於 12.01.2026
- 独家优惠:
- 仅在拍卖中提供
参观
Metzingen CSEPELRFh 75/2000
Metzingen COLLET & ENGELHARDTBF 130 - 11
Siegen WEBORB 45
Weiterstadt MeuserM 76 BF
德国 COLLET-ENGELHARTDMinor
德国 COLLET & ENGELHARD
Rödermark WAGNERWRT 66-1700
Pforzheim STAMAMC 526
Jünkerath KOLBA14
Rödermark VOLZ-V TRADEZB 60-16
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-信任认证标志
什么是可信印章？
Machineseeker通过Machineseeker信任标志认证精选经销商。 在发放之前，Machineseeker 经验丰富的员工会进行标准化和全面的检测。
我們要檢查什麼？
查看
交易許可證 或 商業登記冊摘錄
查看交易商的
地址
確認
銀行連接
驗證
電話
是否可接通 主要的電話號碼
信用報告
中不能包含負面的must not contains negative criteria
買家投訴
會導致收回信任標誌这对您作为买家意味着什么？
通过 Machineseeker 信任标识，您作为买家无需自行检查，就可以识别出极有可能进行诚信且合法经营的可信经销商。
当然，在购买过程中仍可能出现分歧。 Machineseeker 对在 Machineseeker 上活跃的买家或卖家的法律违规行为不承担责任。