瑞士式车床Citizen
M 12
技术细节
- 车削长度:
- 200 毫米
- 主轴速度（最大）:
- 12,000 转/分
- 棒材直径（最大）:
- 12 毫米
- 副主轴最高转速:
- 6,000 转/分
- 设备:
- 切屑输送机
提供
- 位置:
- Nordrhein-Westfalen, 德国
– 距离：约 9,367 公里
- 可用性:
- 拍卖结束后立即
- 交付条件:
- FCA
€1,000.00 (约束性)
免费
描述
In recent years, over €25,000 has been invested in maintenance and repair.
Occasionally a system error occurs (irregularly, e.g., after 2–5 days of operation); after switching the machine off and on, it is fully operational again.
TECHNICAL DETAILS
Max. bar diameter: 12 mm
Max. machining length: 200 mm
Axes: 7 linear axes + C-axes for main and sub spindle
Main spindle
Spindle bore max.: approx. 14 mm
Motor power: approx. 2.2 kW
Speed range: 200 – 12,000 rpm
Indexing: C-axis, full C (0.001°)
Front machining max. drilling diameter: 6 mm
Max. thread: M6
Sub spindle
Max. clamping diameter: 12 mm
Part length, rear side: 125 mm
Max. drilling diameter: 5 mm
Max. thread: M5
Speed range: 250 – 6,000 rpm
Gang-type tool carrier
Max. drilling diameter: 5 mm
Max. thread: M4
Max. speed: 200 – 8,000 rpm
Turret
Max. drilling diameter: 5 mm
Max. thread: M5
Max. speed: 200 – 6,500 rpm
Rear tools
Max. drilling diameter: 5 mm
Max. thread: M5
Speed: up to 8,000 rpm
Tools
Tool stations: 21 positions
Gang slide: 8 positions
Turret: 10 positions
Rear side tools: 3 positions
Tool shank turning tool
廣告是自動翻譯的，翻譯中可能會出現一些錯誤。
支付处理
- 购买附加费用:
- 18 %
- 付款条件:
- 100% 预付款
- 支付方式:
银行转账
优惠详情
- 產品ID:
- A20555355
- 參考編號:
- AUC-2511171
- 最後更新:
- 於 18.11.2025
- 独家优惠:
- 仅在拍卖中提供
参观
Nordrhein-Westfalen CitizenL 32 VII
Nordrhein-Westfalen LNSQuick Load Servo II
Nordrhein-Westfalen CitizenM 16
Nordrhein-Westfalen CitizenM 12
Międzyrzecze Górne CitizenCincom M12
Baden-Württemberg CitizenCincom L12X (L12-2M10)
Hajdúböszörmény CitizenCincom L20E-2M12
Międzyrzecze Górne CitizenCincom M12
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-信任认证标志
什么是可信印章？
Machineseeker通过Machineseeker信任标志认证精选经销商。 在发放之前，Machineseeker 经验丰富的员工会进行标准化和全面的检测。
我們要檢查什麼？
查看
交易許可證 或 商業登記冊摘錄
查看交易商的
地址
確認
銀行連接
驗證
電話
是否可接通 主要的電話號碼
信用報告
中不能包含負面的must not contains negative criteria
買家投訴
會導致收回信任標誌这对您作为买家意味着什么？
通过 Machineseeker 信任标识，您作为买家无需自行检查，就可以识别出极有可能进行诚信且合法经营的可信经销商。
当然，在购买过程中仍可能出现分歧。 Machineseeker 对在 Machineseeker 上活跃的买家或卖家的法律违规行为不承担责任。