宽带砂光机,E型砂带鞋,适用于漆面加工BÜTFERING
SKO 111 C
宽带砂光机,E型砂带鞋,适用于漆面加工
BÜTFERING
SKO 111 C
固定价格 不含增值税
€24,500
出厂年份
2007
状况
二手
位置
Langenfeld (Rheinland) 

显示图片
显示地图
机器数据
价格和位置
固定价格 不含增值税
€24,500
- 位置:
- Herzogstrasse 10a, 40764 Langenfeld, Deutschland

拨打
优惠详情
- 广告编号:
- A21323292
- 更新:
- 最近更新时间为 15.04.2026
描述
Calibration and Fine Sanding Automatic, Wide Belt Sander with Electronic Segmental Sanding Shoe and Lacquer Sanding
A video of the machine in operation can be provided upon request.
Ideal sanding machine for interior finishing workshops, also suitable for intermediate lacquer sanding.
Single-belt machine with combination sanding unit and electronic segmented pressure beam, edge segments can be switched on and off
Segment width of pressure beam: 35 mm
Contact roller pneumatically adjustable, low wear thanks to grooved steel roller
Abrasive compensation
Drive motor: 7.5 kW with automatic motor brake, infinitely variable belt speed via frequency converter from 2 - 18 m/s
Feed belt speed continuously adjustable via frequency inverter from 2.5 - 13 m/min
Pneumatic workpiece-controlled belt cleaning device
Cleaning brush at outfeed
Constant working height of 900 mm due to top part adjustment, thus also integrable in sanding lines
Feed belt is still very grippy and in very good condition
Maximum sanding width approx. 1090 mm
Workpiece height approx. 3 to 150 mm
Common abrasive belt dimensions: 1120 x 1900 mm
3 rubber-coated pressure rollers
Infeed roller table and foldable outfeed table
Prepared for vacuum blower. The carpet is perforated and plug for optional blower is available. Alternatively, the mat can be connected to an extraction system.
Extraction connection: 1 x 180 mm, 1 x 140 mm, and 2 x 100 mm
Terminal control with 50 programmable sanding programs for automated machine operation.
Parameters: belt speed, feed speed, workpiece height, pressure beam activation points front and rear as well as edge segments, belt air nozzle, optional vacuum blower, pneumatic adjustment of the calibration roller
CE mark
Operating manual
without the shown power cable
Original paint, only partially retouched
Approx. 592 operating hours, i.e. about 40 minutes per week.
Dimensions approx. 1800 (with table 2600) x 1800 x 2150 mm (LxWxH). Weight approx. 2200 kg.
Hsdpfxeym Du Re Akasnk
The machine can gladly be demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse. See also 'other offers from this provider.'
该广告为自动翻译,可能存在翻译错误。
A video of the machine in operation can be provided upon request.
Ideal sanding machine for interior finishing workshops, also suitable for intermediate lacquer sanding.
Single-belt machine with combination sanding unit and electronic segmented pressure beam, edge segments can be switched on and off
Segment width of pressure beam: 35 mm
Contact roller pneumatically adjustable, low wear thanks to grooved steel roller
Abrasive compensation
Drive motor: 7.5 kW with automatic motor brake, infinitely variable belt speed via frequency converter from 2 - 18 m/s
Feed belt speed continuously adjustable via frequency inverter from 2.5 - 13 m/min
Pneumatic workpiece-controlled belt cleaning device
Cleaning brush at outfeed
Constant working height of 900 mm due to top part adjustment, thus also integrable in sanding lines
Feed belt is still very grippy and in very good condition
Maximum sanding width approx. 1090 mm
Workpiece height approx. 3 to 150 mm
Common abrasive belt dimensions: 1120 x 1900 mm
3 rubber-coated pressure rollers
Infeed roller table and foldable outfeed table
Prepared for vacuum blower. The carpet is perforated and plug for optional blower is available. Alternatively, the mat can be connected to an extraction system.
Extraction connection: 1 x 180 mm, 1 x 140 mm, and 2 x 100 mm
Terminal control with 50 programmable sanding programs for automated machine operation.
Parameters: belt speed, feed speed, workpiece height, pressure beam activation points front and rear as well as edge segments, belt air nozzle, optional vacuum blower, pneumatic adjustment of the calibration roller
CE mark
Operating manual
without the shown power cable
Original paint, only partially retouched
Approx. 592 operating hours, i.e. about 40 minutes per week.
Dimensions approx. 1800 (with table 2600) x 1800 x 2150 mm (LxWxH). Weight approx. 2200 kg.
Hsdpfxeym Du Re Akasnk
The machine can gladly be demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse. See also 'other offers from this provider.'
该广告为自动翻译,可能存在翻译错误。
发送询价
电话 & 传真
+49 2173 ... 广告
您的广告已成功删除
发生错误














































