Arburg ARBURG 520 E 1500-290（2018年）

Arburg ARBURG 520 E 1500-290 (2018)

Electrical injection moulding machine manufactured in 2018. This Arburg ARBURG 520 E 1500-290 features a clamping force of 1500 kN and an injection unit size of 290. It includes a highly wear-resistant thermoplastic cylinder with a screw diameter of 30 mm. If you are looking to get high-quality injection moulding capabilities, consider the Arburg ARBURG 520 E 1500-290 machine we have for sale. Contact us for further details.

2 Machines available- Clamping Force / Injection Unit Size: 1500 kN / Injection unit size 290- Operating Hours (Pump): 24,234 h (as of 05.11.2026)- Operating Hours (Automatic): 20,965 h (as of 05.11.2026)- Operating Hours (Semi-Automatic): 0 h- Total Machine Cycles: 3,080,783- Screw Diameter: 30 mm (Highly wear-resistant thermoplastic cylinder, CrN coated screw and non-return valve, mixing section)- Non-Return Valve: Extended bushing and shortened stroke- Drive / Hydraulic System: axw Control ScrewPilot via servoelectric direct drive, 15.5 kW small accumulator hydraulics with 11.2 l/min charging flow rate- Control Unit: Selogica direct- Clamping Platen Centring: Central Ø 125 mm, continuous groove in fixed platen (Y-axis: 6 mm deep, 22 mm wide + 0.02 mm), M12 Euromap mounting holes- Core Pulls: 2 core pulls, simultaneous motion P/Q controlled, programmable; Core pull 2 extended to fixed platen; max flow rate 100 l/min- Ejection System: Electromechanical ejector, synchronised with mould opening, ejector quick-release coupling, ejector plate safety connection- Nozzle: Open nozzle 30 mm, tip with R 19 mm, programmable controlled nozzle contact force- Mold Height Adjustment: Servoelectric mould height adjustment with automatic clamping force regulation- Temperature Control / Heating: 12 electrical heating control circuits for mould heating (Harting HAN 24E special assignment); 1 additional heating control circuit for nozzle/adapter; mould temperature control interface 20 mA with connection cable for HB-THERM; temperature circuits up to max. 100 °C with flow measurement- Pneumatics & Valves: Pneumatic service unit with 3 pressure reducers (3x 1000 l/min); blow-off unit 1 with 3/2 valve on fixed platen; electric and pneumatic actuation NVD1 in mould- Interfaces: Robot system interface per EUROMAP 67 (50-pin) & EUROMAP 12 (F9264); safety gate door protection interface (EUROMAP 73); ALS (OPC-UA) ARBURG host computer interface; CF-card data storage; EUROMAP 65 chip card operator authorization; dosing / coloring unit interface; external conveyor belt control interface; container changer device interface; serial/USB printer interface; Mobile SELOGICA AMS connection- Socket Distribution: Front operator side with 1 CEE, 1 Schuko; special distribution at rear end of machine base with 2x CEE 16A, 1x 32A, 3x Schuko 10A- Lighting & Signaling: Waldmann MCXFL 3S LED machine light in mould installation space (automatic on/off with safety gate); acoustic and flashing light fault indicatorsIncluding Peripheral Equipment:- X-Axis (Horizontal Beam Traverse): Stroke: 2,500 mm; Drive: Brushless servomotor; Linear instantaneous speed: 4.00 m/s; Position accuracy: ±0.5 mm; Repeatability: ±0.1 mm- Y-Axis (Demoulding Stroke): Stroke: 700 mm; Drive: Brushless servomotor; Linear instantaneous speed: 3.00 m/s; Position accuracy: ±0.5 mm; Repeatability: ±0.1 mm- Z-Axis (Vertical Stroke): Stroke: 1,400 mm; Drive: Brushless servomotor; Linear instantaneous speed: 4.00 m/s; Position accuracy: ±0.5 mm; Repeatability: ±0.
Fsdpfx Acs Ai Skks Depp