打包机

ANIS ATS 110-75S-9CT-30kW

For sale here is an ANIS ATS 110-75S-9CT-30kW baler, including cross-tying system (9-fold binding).

The baler is in good technical condition and was only used sporadically.

DIMENSIONS OF THE BALER
- Total length: 9700 mm
- Total width: 3700 mm
- Transport width: 2300 mm
- Height incl. chute: 3640 mm
- Approx. total weight: 24 t
- Ground pressure approx. 5 kg/sqcm
- Heaviest part of the machine: approx. 6 tons

CHUTE OPENING
- Length: 1600 mm
- Width: 1200 mm
- Inspection door (glass)

PRESSING CHAMBER
- Piston stroke length: 2600 mm
- WxH: 1100 x 770 mm
- Volume: 2.2 cbm
- The piston runs on solid rollers and is fitted with knives for cutting residual material.
- The pressure on the pressing chamber (channel) is applied by two side cylinders and a simple lever system, allowing for consistent and even force distribution.

HYDRAULIC EQUIPMENT
- Siemens electric motor, 4-pole, 400V-50Hz, 30 kW
- Hydraulic pump (Bucher) const./peak 320/400 bar
- Max. working pressure 290 bar
- Denison hydraulic valves 24 VDC
- Pressure monitoring with proportional valve cycle
- Automatic oil temperature monitoring
- Automatic oil filter monitoring
- Automatic oil level monitoring
- Oil volume: 600L
- Max. press force: 740 kN / 74 t
- Specific pressure: 87 N/sqcm

PLANT THROUGHPUT
- Volume per press operation including pre-compression: 1.76 cbm
- Average cycle time per press operation approx. 40+8 sec.
- Cycle time without material 22+8 sec.
- Binding time 30 sec.
- Theoretical volume without binding 1.84 m3/h
- Average working volume 123 m3/h
- Capacity at material density 30 kg/m3: 3-4 t/h

BALES
Hfedpfxjy Ayiqs Ag Usf
- Bale length: 500 - 2000 mm
- Bale width: 1100 mm
- Bale height: 770 mm

该广告为自动翻译，可能存在翻译错误。