推台锯Altendorf
F 45 EvoDrive
推台锯
Altendorf
F 45 EvoDrive
製造年份
2025
狀況
全新
位置
Oberkail 

顯示圖片
显示地图
机器数据
价格和位置
- 位置:
- Am Hetzenborn 2, 54533 Oberkail, DE
撥打
技术细节
- 切割长度(最大):
- 5,000 毫米
- 最大切割宽度:
- 1,300 毫米
- 锯片直径:
- 450 毫米
- 高度调节类型:
- 电动
- 输入电流类型:
- 三相
- 设备:
- 发动机制动, 照明, 计量器, 转速可无级变速
优惠详情
- 產品ID:
- A19031141
- 最後更新:
- 於 28.04.2025
描述
You can get all common Altendorf models, including the F25, F35, WA80, and F45, as well as the Hand Guard machine in all variations.
Basic Equipment
Electrically driven height and tilt adjustment
0-46° with automatic cutting height correction
when tilting
Controls at eye level, tiltable
Double sliding table, table length 3,000 mm
Parallel stop, manually adjustable via
scale, including manual fine adjustment
Cutting width 1,000 mm, larger available upon request.
Angle stop with fixed 90° position,
manually adjustable via scale up to 3,200 mm
Maximum sawblade projection: 150 mm
Maximum sawblade diameter: 450 mm
Drive power: 4 kW (5.5 HP) at 4,000 rpm
AKE tool clamping system for the main sawblade
Working height: 91 cm
Motor: 5.5 kW (7.5 HP) with VARIO F45
- Continuously variable speed control from 2,000 - 6,000 rpm
- Precise speed adjustment to the material increases cutting quality and sawblade service life
Extended cutting height for one-sided tilting
This option is equipped with a large extraction hood for a maximum sawblade diameter of 550 mm and a maximum sawblade projection of 204 mm for one-sided tilting.
In combination with a scoring unit, the maximum saw blade diameter is 500 mm or 179 mm cutting height. Only in conjunction with a minimum drive power of 5.5 kW (7.5 HP).
2-axis scoring unit, single-axis tilting
With electric height and lateral adjustment, programmable scoring blade height
with quick lowering and quick raising,
drive motor 0.75 kW (1 HP), 8200 rpm.
Retrofitting only possible on machines prepared for a scoring unit.
LED lighting
With particularly energy-efficient LED technology, the danger area of the scoring unit is clearly marked.
The Altendorf sliding table is famous for its smooth and precise operation. It can be infinitely locked in any position. The large double rollers, precision-machined from hardened steel, hold the upper carriage in connection with the lower carriage with absolute precision in their respective hard-chrome-plated guide rods. This smooth running quality is maintained even after decades of use and contamination. The carriage is designed as an extremely torsion-resistant and dimensionally rigid multi-hollow chamber system. The table surface is precisely planed and anodized. A hard-chrome-plated round rod, which is positively embedded in the upper carriage, serves as a mount for the cross slide and as an interface for various accessories. The entire unit is low-maintenance and requires no lubrication.
On/Off Switch on the Sliding Table
Kedpfjwf Hdgox Af Aenc
The on/off switch on the sliding table is always within easy reach. The four buttons turn both the main saw blade and the scoring unit on and off. This saves time and ensures greater safety.
Angle and miter stop, cutting to lengths up to 3500 mm
This ALTENDORF-patented stop with integrated length compensation facilitates precise cutting of angles and miters in one function. In both positions, the tilt angle is continuously adjustable by 49° and is displayed on a scale.
Ask us about your dream machine and we will be happy to advise you.
We are happy to arrange viewings directly at the machine, in the factory, or with wood dust in the air.
廣告是自動翻譯的,翻譯中可能會出現一些錯誤。
Basic Equipment
Electrically driven height and tilt adjustment
0-46° with automatic cutting height correction
when tilting
Controls at eye level, tiltable
Double sliding table, table length 3,000 mm
Parallel stop, manually adjustable via
scale, including manual fine adjustment
Cutting width 1,000 mm, larger available upon request.
Angle stop with fixed 90° position,
manually adjustable via scale up to 3,200 mm
Maximum sawblade projection: 150 mm
Maximum sawblade diameter: 450 mm
Drive power: 4 kW (5.5 HP) at 4,000 rpm
AKE tool clamping system for the main sawblade
Working height: 91 cm
Motor: 5.5 kW (7.5 HP) with VARIO F45
- Continuously variable speed control from 2,000 - 6,000 rpm
- Precise speed adjustment to the material increases cutting quality and sawblade service life
Extended cutting height for one-sided tilting
This option is equipped with a large extraction hood for a maximum sawblade diameter of 550 mm and a maximum sawblade projection of 204 mm for one-sided tilting.
In combination with a scoring unit, the maximum saw blade diameter is 500 mm or 179 mm cutting height. Only in conjunction with a minimum drive power of 5.5 kW (7.5 HP).
2-axis scoring unit, single-axis tilting
With electric height and lateral adjustment, programmable scoring blade height
with quick lowering and quick raising,
drive motor 0.75 kW (1 HP), 8200 rpm.
Retrofitting only possible on machines prepared for a scoring unit.
LED lighting
With particularly energy-efficient LED technology, the danger area of the scoring unit is clearly marked.
The Altendorf sliding table is famous for its smooth and precise operation. It can be infinitely locked in any position. The large double rollers, precision-machined from hardened steel, hold the upper carriage in connection with the lower carriage with absolute precision in their respective hard-chrome-plated guide rods. This smooth running quality is maintained even after decades of use and contamination. The carriage is designed as an extremely torsion-resistant and dimensionally rigid multi-hollow chamber system. The table surface is precisely planed and anodized. A hard-chrome-plated round rod, which is positively embedded in the upper carriage, serves as a mount for the cross slide and as an interface for various accessories. The entire unit is low-maintenance and requires no lubrication.
On/Off Switch on the Sliding Table
Kedpfjwf Hdgox Af Aenc
The on/off switch on the sliding table is always within easy reach. The four buttons turn both the main saw blade and the scoring unit on and off. This saves time and ensures greater safety.
Angle and miter stop, cutting to lengths up to 3500 mm
This ALTENDORF-patented stop with integrated length compensation facilitates precise cutting of angles and miters in one function. In both positions, the tilt angle is continuously adjustable by 49° and is displayed on a scale.
Ask us about your dream machine and we will be happy to advise you.
We are happy to arrange viewings directly at the machine, in the factory, or with wood dust in the air.
廣告是自動翻譯的,翻譯中可能會出現一些錯誤。
这些广告您可能也感兴趣。
小广告

9,339 km
推台锯
AltendorfF45 EvoDrive
AltendorfF45 EvoDrive
拍卖
拍賣已結束

9,330 km
推台锯
AltendorfF 45 EvoDrive
AltendorfF 45 EvoDrive
小广告

9,410 km
推台锯
AltendorfF 45 Evo Drive
AltendorfF 45 Evo Drive
小广告

9,454 km
推台锯
AltendorfF 45 Evo Drive
AltendorfF 45 Evo Drive
您的广告已成功删除
发生错误