条状颗粒切割机(颗粒切刀)Accrapack Systems LTD
Series 750 Pelletizer
条状颗粒切割机(颗粒切刀)
Accrapack Systems LTD
Series 750 Pelletizer
FCA VB 不含增值税
€6,500
出厂年份
2011
状况
二手
(功能受限)
位置
Bergen op Zoom 

基本数据
价格和位置
FCA VB 不含增值税
€6,500
- 位置:
- Bergen op Zoom, 荷兰

拨打
优惠详情
- 广告编号:
- A23348531
- 更新:
- 最近更新时间为 17.11.2026
描述
The Accrapak Systems Ltd Series 750 is a compact, base-mounted dry-cutting strand granulation and downstream system for thermoplastic materials.
Key features and technical overview
• Design: Compact combination or stand-alone units consisting of a cooling bath, strand dryer (air knife/air miser), and granulator on a common base frame.
Iode Akvlxjpfx Acastp
• Model
o 750-3 / other models: For 8–12 strands, throughputs up to approximately 200 kg/h, approximately 2.2 kW, 3–4 m cooling bath.
• Cutting principle: Multi-tooth inclined/helical rotor against a fixed counter blade for uniform cutting. Eccentric bearing housings enable precise readjustment.
• Drive options: Available as a single drive.
• Infeed and handling: Driven upper infeed roller with deep teeth (lubricant-free) and straight infeed tables (also ideal for softer materials).
• Safety & maintenance: The overhung design allows for quick removal of infeed rollers and rotor without disassembling the main bearings. Safety solenoid interlocks on the hood and discharge chute only release these when the machine is completely stopped.
Note: There is transport damage to the control panel housing.
Operating hours are unknown, but due to its use in a pilot plant, they are likely lower than in a production environment.
该广告为自动翻译,可能存在翻译错误。
Key features and technical overview
• Design: Compact combination or stand-alone units consisting of a cooling bath, strand dryer (air knife/air miser), and granulator on a common base frame.
Iode Akvlxjpfx Acastp
• Model
o 750-3 / other models: For 8–12 strands, throughputs up to approximately 200 kg/h, approximately 2.2 kW, 3–4 m cooling bath.
• Cutting principle: Multi-tooth inclined/helical rotor against a fixed counter blade for uniform cutting. Eccentric bearing housings enable precise readjustment.
• Drive options: Available as a single drive.
• Infeed and handling: Driven upper infeed roller with deep teeth (lubricant-free) and straight infeed tables (also ideal for softer materials).
• Safety & maintenance: The overhung design allows for quick removal of infeed rollers and rotor without disassembling the main bearings. Safety solenoid interlocks on the hood and discharge chute only release these when the machine is completely stopped.
Note: There is transport damage to the control panel housing.
Operating hours are unknown, but due to its use in a pilot plant, they are likely lower than in a production environment.
该广告为自动翻译,可能存在翻译错误。
供應商
注意: 免费注册或登录,以获取所有信息。
上次在线:上周
注册于: 2026
19 在线广告
发送询价
电话 & 传真
+43 660 2... 广告
您的广告已成功删除
发生错误
































