万能试验机ZwickRoell
AllroundLine 50 kN
机器数据
提供
- 位置:
- Baden-Württemberg, 德国
– 距离：约 9,495 公里
- 可用性:
- 拍卖结束后立即
- 交付条件:
- FCA
免费
免费
描述
TECHNICAL DETAILS
Load Cells: 2 units Xforce K
Testing Software: testControl II & testXpert III
Load Cell: Xforce K
Measuring Amplifier: DCSC module
Documentation: available
FURTHER TECHNICAL DETAILS - as per documentation, no guarantee
Maximum Test Force Fmax: 50 kN
Total Height of Test Space: 1,534 mm
Height of Lower Test Space without Fixtures: 1,355 mm
Height of Upper Test Space without Fixtures: 1,369 mm
An additional crosshead is required for the upper test space.
Test Space Width: 440 mm
Load Frame
Load Frame Height without Uprights: 1,714 mm
Load Frame Height with Uprights: 1,829–2,694 mm
Load Frame Width without Uprights: 760 mm
Load Frame Width with Uprights: 936 mm
Load Frame Width with Uprights and Machine Electronics: 1,124 mm
Load Frame Depth: 140 mm
Load Frame Depth without Uprights and with Drive Base: 507 mm
Load Frame Depth with Uprights: 762 mm
Load Frame Depth with Uprights and Machine Electronics: 765 mm
Weight and Footprint
Weight with Machine Electronics, Uprights, and typical fixtures: approx. 300 kg
Pure Footprint: 0.01 m²
Load Frame Base Area: 0.713 m²
Average sound pressure level at maximum speed, measured 1 m from the machine front: 61 dB(A)
Drive
Crosshead Speed: min. 0.0005 mm/min up to max. 600 mm/min
Crosshead Return Speed: max. 1,000 mm/min
Deviation from Set Drive Speed: max. 0.05% of actual value
Drive Travel Resolution: 0.317891 nm
Positioning Repeatability without Directional Change: ±2.0 µm
Adaptive Control
Cycle Time: 1,000 Hz
Power Supply
CEE 7 (Schuko) mains connector
Mains Connection: 230 V, 1 Ph/N/PE
Power Consumption at Full Load: approx. 2.3 kVA
Mains Frequency: 50/60 Hz
Mains Cable Protection: 16 A
Safety Functions
The drive is equipped with a mechanical holding brake.
When switched off, in the event of emergency stop activation, or during a power failure, the materials testing machine remains at its current position.
Unintended release due to the energy stored in the specimen is prevented.
该广告为自动翻译，可能存在翻译错误。
支付处理
- 购买附加费用:
- 18 %
- 付款条件:
- 100% 预付款
- 支付方式:
银行转账
优惠详情
- 广告编号:
- A22432547
- 参考编号:
- AUC-2607217
- 更新:
- 最近更新时间为 27.07.2026
- 独家优惠:
- 仅在拍卖中提供
参观
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-信任认证标志
什么是可信印章？
Machineseeker通过Machineseeker信任标志认证精选经销商。 在发放之前，Machineseeker 经验丰富的员工会进行标准化和全面的检测。
我们检查什么？
检查
营业执照或商业登记摘录
检查经销商的
邮寄地址
银行账户信息验证
主电话号码的
电话
可接通性验证
企业信用报告
不得显示任何负面特征
买家的投诉
可能导致认证标志被撤销这对您作为买家意味着什么？
通过 Machineseeker 信任标识，您作为买家无需自行检查，就可以识别出极有可能进行诚信且合法经营的可信经销商。
当然，在购买过程中仍可能出现分歧。 Machineseeker 对在 Machineseeker 上活跃的买家或卖家的法律违规行为不承担责任。