数控车床

ZMM MEXPOL TUS 580C Sinumerk 828D

CNC lathe TUS 580 C
New CNC-controlled machine with flat bed and Siemens Sinumerik 828D BASIC ShopTurn .
Delivery date: approx. 4 months after technical and commercial agreement.

Center height [mm]: 290
Swing diameter over bed [mm]: 590
Swing diameter over bed slide [mm]: 380
Center width [mm]: 1000/1500/2000/3000/4000/5000
Max. Machining length [mm]: 1250/1750/2750/3750/4750/5750
Spindle bore [mm]: 72
Spindle mount [DIN]: 55027/8
Taper in the main spindle [MK]: 8
Max. Workpiece weight:
- Clamping between centers [kg]: 400
- In chuck and live center in tailstock [kg]: 600
- In chuck and steady rest [kg]: 800
- In chuck, steady rest and live center [kg]: 1300
- Flying (Lmax = 250 mm) [kg]: 150
Bed width [mm]: 400
Turning tool cross-section (HxW) [mm]: 32 x 32
Multifix system steel holder [size]: C

Speeds:
Total speed range [rpm]: 25 to 2000
Number of stages: 3
Gear stage I [rpm]: 25 - 100
Gear stage II [rpm]: 100 - 400
Gear stage III [rpm]: 500 - 2000
Max. Torque (spindle) [Nm]: 1200
- Gear stage I [Nm]: 1200
- Gear stage II [Nm]: 300
- Gear stage III [Nm]: 60

Travel range:
Longitudinal adjustment - X axis [mm]: 290
Longitudinal adjustment - Z axis [mm]: 1000/1500/2000/3000/4000/5000

Feed range:
Feed range in X/Z-axis [mm/min]: 1 - 3000
Rapid traverse speed X-axis [mm/min]: 8000
Rapid traverse speed Z-axis [mm/min]: 8000

Torque of the axis drives:
X-axis [Nm]: 11
Z-axis [Nm]: 16
Pedpeufgg Dsfx Afrsgw
Feed influence [%]: 0 - 120

Tailstock:
Quill diameter [mm]: 90
Quill stroke [mm]: 230
Quill taper [MK]: 5

Drives:
Main motor power [kW]: 11
Cooling pump motor output [kW]: 0.09
Total output [kVA]: 15

Space requirement/weight:
Length of the machine with 1000 mm center distance [mm]: 3150
Length of the machine with 1500 mm center distance [mm]: 3650
Length of the machine with 2000 mm center distance [mm]: 4150
Length of the machine with 3000 mm center distance [mm]: 4650
Length of the machine with 4000 mm center distance [mm]: 5250
Length of the machine with 5000 mm center distance [mm]: 5750
Width of the machine, depending on the equipment [mm]: 2000
Height of the machine, depending on the equipment [mm]: 2000
Machine weight at 2000 mm center distance [kg]: 3800
Additional weight for a further 1000 mm center distance [kg]: approx. 500

Standard accessories:
- Electrical equipment for three-phase current 400 V / 50Hz according to VDE 0113
- Siemens SINUMERIK 828D BASIC ShopTurn
- Frequency controller for main drive - SIEMENS
- Illumination lamp
- Quick-change steel holder head size C
- Coolant system with electric pump
- Locked chuck protection hood
- Rear chip guard
- Chip guard at the front of the top support
- Operating instructions, test report
- CE and declaration of conformity
- Machine color (similar to RAL 7035 RAL 7011)

Options:
- Fixed setting vice
- Three- and four-jaw chuck
- Face plate
- Chuck flange
- Hydraulic tailstock quill
- Power chuck
- Turret head with turret disk
- Drill stand with boring bar
- And much more

廣告是自動翻譯的，翻譯中可能會出現一些錯誤。