碎纸机ZERMA
ZHS
碎纸机
ZERMA
ZHS
狀況
全新
位置
Zuzenhausen 

顯示圖片
显示地图
价格和位置
- 卖方所在地:
- Im Rohrbusch 15, 74939 Zuzenhausen, 德国

撥打
优惠详情
- 產品ID:
- A5444712
- 參考編號:
- 2000
- 最後更新:
- 於 10.06.2025
描述
ZHS 600 - 18.5/22 kW
Rotor diameter: 400 mm
Working cross-section: 520 x 470 mm
ZHS 850 - 30 kW
Rotor diameter: 400 mm
Working cross-section: 800 x 820 mm
ZHS 1100 - 37 kW
Lrjdpfx Ahjghgdkjzju
Rotor diameter: 400 mm
Working cross-section: 1,080 x 1,040 mm
ZHS 1400 - 55 kW
Rotor diameter: 400 mm
Working cross-section: 1,400 x 1,380 mm
ZHS 1500 - 90/110 kW
Rotor diameter: 600 mm
Working cross-section: 1,360 x 1,430 mm
ZHS 1700 - 75 kW
Rotor diameter: 400 mm
Working cross-section: 1,640 x 1,550 mm
ZHS 2000 - 2 x 90 kW
Rotor diameter: 400/600 mm
Working cross-section: 1,920 x 1,550 mm
ZHS 2600 - 2 x 90 kW
Rotor diameter: 400/600 mm
Working cross-section: 2,480 x 1,550 mm
ZHS - economical all-rounders
The ZHS series has a load-dependent hydraulic slide that feeds the material to the rotor in a slightly inclined position in a horizontal movement. The material is cut between the rotor and stator blades until it falls through the sieve installed and screwed under the rotor. The replaceable sieve defines the final grain size. The shredded material can be discharged via a conveyor belt, a discharge screw or pneumatically using a suction system.
The single-shaft shredders of the ZHS series are designed for light to medium-heavy loads in the plastics industry.
Technical details:
Roller-bearing hydraulic slide with horizontal movement
Screwed knives and knife holders
Optionally with segment base for particularly thin parts and materials
Aggressiveness of the rotor can be reduced or increased by screwing on filler pieces
Can be combined in a 2-stage system with a cutting mill as a pre-shredder
廣告是自動翻譯的,翻譯中可能會出現一些錯誤。
Rotor diameter: 400 mm
Working cross-section: 520 x 470 mm
ZHS 850 - 30 kW
Rotor diameter: 400 mm
Working cross-section: 800 x 820 mm
ZHS 1100 - 37 kW
Lrjdpfx Ahjghgdkjzju
Rotor diameter: 400 mm
Working cross-section: 1,080 x 1,040 mm
ZHS 1400 - 55 kW
Rotor diameter: 400 mm
Working cross-section: 1,400 x 1,380 mm
ZHS 1500 - 90/110 kW
Rotor diameter: 600 mm
Working cross-section: 1,360 x 1,430 mm
ZHS 1700 - 75 kW
Rotor diameter: 400 mm
Working cross-section: 1,640 x 1,550 mm
ZHS 2000 - 2 x 90 kW
Rotor diameter: 400/600 mm
Working cross-section: 1,920 x 1,550 mm
ZHS 2600 - 2 x 90 kW
Rotor diameter: 400/600 mm
Working cross-section: 2,480 x 1,550 mm
ZHS - economical all-rounders
The ZHS series has a load-dependent hydraulic slide that feeds the material to the rotor in a slightly inclined position in a horizontal movement. The material is cut between the rotor and stator blades until it falls through the sieve installed and screwed under the rotor. The replaceable sieve defines the final grain size. The shredded material can be discharged via a conveyor belt, a discharge screw or pneumatically using a suction system.
The single-shaft shredders of the ZHS series are designed for light to medium-heavy loads in the plastics industry.
Technical details:
Roller-bearing hydraulic slide with horizontal movement
Screwed knives and knife holders
Optionally with segment base for particularly thin parts and materials
Aggressiveness of the rotor can be reduced or increased by screwing on filler pieces
Can be combined in a 2-stage system with a cutting mill as a pre-shredder
廣告是自動翻譯的,翻譯中可能會出現一些錯誤。
您的广告已成功删除
发生错误












