四面刨木机

WEINIG Profimat 26 Super_Fenster

Number of spindles 5 St.
Working width 230 mm
Working height 120 mm
Length of the planing table 2000 mm
Feed speed 5-24 m/min.
Weinig Profimat 26 S Four-Sided Planer
.....
Summary:
- 5 spindles (bottom, right, left, top, bottom)
- Common control of the right spindle (axial), top spindle (axial),
and glass bead discharge.
- Working width (with a 125 mm tool circle) 20 - 230 mm
- Working height (with a 125 mm tool circle) 8 - 120 mm

Detailed description:

1. SPINDLE
.....
- First lower horizontal spindle
- Motor with brake 5.5 kW
- Diameter 40 mm
- Speed ??6,000 rpm
- Tool circle 125 - 145 mm
Hodpfx Aboyuzczodoni
- Axial travel 5 mm
- Rebating device
- Hardened table insert in front of the 1st lower spindle

2. SPINDLE
.....
- First right vertical spindle
- Motor with brake 7.5 kW
Shared motor with left vertical spindle
- Diameter 40 mm
- Speed ??6,000 rpm
- Tool circle 15 mm below table level 100 - 200 mm
- Tool circle 40 mm below table level 100 - 180 mm
- Max. tool diameter behind stop level 180 mm
- Max. groove depth 35 mm
- Axial travel 40 mm
- Right spindle pneumatically controlled axially (40 mm) via selector switch,
max. saw blade diameter 180 mm
- Insertion segment 125 mm

3. SPINDLE
.....
- First left vertical spindle
- Shared motor with 1st right vertical spindle
- Diameter 40 mm
- Speed ??6,000 rpm
- Tool swing circle 15 mm below table level 100 - 200 mm
- Tool swing circle 40 mm below table level 100 - 180 mm
- Max. Tool diameter behind stop plane 180 mm
-Maximum groove depth 35 mm
-Axially travel 40 mm
-Insert segment 125 mm

4. SPINDLE
.....
-First upper horizontal spindle
-Motor with brake 7.5 kW
-Diameter 40 mm
-Speed ??6,000 rpm
-Tool swing circle 112 - 200 mm
-Maximum groove depth 35 mm
-Axially travel 40 mm
-Upper horizontal spindle pneumatically controlled axially (40 mm)
via selector switch, Max. saw diameter 200 mm
-Split pressure shoe in front of upper spindle, adjustable to the
tool swing circle and pivoting away from the tool, spring-loaded.
- Pneumatically adjustable up/down glazing bead discharge to the upper spindle

5. SPINDLE
.....
- Second lower horizontal spindle
- Motor with brake 4.0 kW
- Diameter 40 mm
- Speed ??6,000 rpm
- Tooling circle 112 - 200 mm
- Maximum groove depth 15 mm
All groove spindles dynamically balanced for high concentricity

Common control of the right spindle (axial), upper spindle (axial)
and glazing bead discharge

FEED SYSTEM
.....
- Mechanical feed, infinitely variable 5 - 24 m/min. With brake – 2.2 kW
-Feed roller in front of the first lower tool, pneumatically
controlled "up-down"
-Durofer pointed tooth rollers (Weinig patent) with depth limiter and
self-cleaning
-Adjustment travel of the feed rollers relative to the left spindle, axial 35 mm

MACHINE ELECTRICAL TECHNOLOGY
.....
-Operating voltage 400 volts (voltage range 380–420 volts), 50 Hz
-Electrical design according to DIN VDE 0113, electrical equipment of
industrial machines EN 60204, IEC 204-1
Other electrical regulations are not c...