数控车床

WEILER E35

1997 Weiler E35 Cycle-Controlled CNC Lathe

Used 1997 Weiler E35 CNC / Cycle-Controlled Lathe for Sale – Weiler D1 Control – 410mm Swing – 54mm Spindle Bore – 3,000rpm – 10 Tool Holders

Manufacturer: Weiler
Model: E 35
Machine Type: CnC Lathe
Year: 1997
Condition: Working Well

Machine Description
The Weiler E35 is a high-quality German-built precision lathe combining the flexibility of a conventional centre lathe with the productivity of CNC/cycle-controlled machining.

This machine is equipped with the Weiler digital conversational cycle control, allowing straightforward manual machining as well as programmed turning cycles for repeat work, tapers, radii and other common turning operations.

With approximately 410mm swing over the bed, 54mm spindle bore and spindle speeds up to 3,000rpm, the E35 is particularly well suited to precision engineering, toolroom work, maintenance departments, repair work and small-to-medium batch production.

The machine has approximately 33,000 power-on hours and is supplied with 10 quick-change toolpost holders.

Main Specifications
Manufacturer: Weiler Werkzeugmaschinen
Model: E35
Year: 1997
Serial Number: 323
Machine Type: Cycle-Controlled / CNC Centre Lathe
Control: Weiler Digital Cycle Control / D1-type control
Power-On Hours: Approx. 33,000 hours

Turning Capacity
Swing Over Bed: 410mm
Swing Over Cross Slide: 200mm
Centre Height: 200mm
Spindle Bore: 54mm
Maximum Chuck Diameter: 250mm
Faceplate Diameter: 355mm
Distance Between Centres: 950mm

Spindle
Spindle Speed Range: 1–3,000rpm
Spindle Power: 7.5kW
Maximum Spindle Torque: 700Nm
Spindle Bore: 54mm
Spindle Internal Taper: MT6
Spindle Nose: DIN 55027 Size 6 type
The combination of a 54mm spindle bore and substantial torque makes the E35 suitable for both precision finishing and heavier general turning work.

Weiler Cycle Control
The machine is fitted with the Weiler conversational cycle control, designed to make CNC turning accessible without requiring full conventional G-code programming for every job.

The control provides functions for operations such as:
Prodpo Agu A Sofx Ai Tjc
Straight turning
Facing
Taper turning
Radius turning
Threading
Positioning
Feed control
Spindle speed control
Repetitive machining cycles
Manual machine operation
Conversational cycle programming
This type of control makes the E35 particularly attractive to toolrooms and general engineering workshops where both one-off components and repeat batches are produced.

Feed & Axis Performance
Longitudinal Feed Range: 0.001–20mm/rev
Cross Feed Range: 0.001–20mm/rev
Longitudinal Rapid Traverse: 10m/min
Cross Rapid Traverse: 5m/min
Cross Travel: 230mm

Tailstock
Tailstock Taper: MT4
Tailstock Quill Diameter: 65mm
Tailstock Quill Stroke: 120mm
The tailstock allows the machine to support longer workpieces and carry out drilling, reaming and centre-working operations.

Tooling Included
The machine is supplied with: 10 quick-change toolpost holders

Electrical Specification
Operating Voltage: 400V
Frequency: 50Hz
Connected Load: 10kW
Nominal Current: 18A
Control Voltage: 24 / 230V

Approximate Machine Dimensions
Overall Length: 2,300mm
Overall Width: 1,400mm
Overall Height: 1,700mm
Machine Weight: 2,100kg

Please Note: All specifications, dimensions, capacities, speeds and machine details quoted above are approximate and are provided for guidance only.