万能车床

WEILER Condor 81

- K+C 3-axis position indicator
- Bison 3204-160 3-jaw lathe chuck
- Collet chuck + various collets
- Chuck guard
- Multifix
- Coolant system
- Chip deflector
Codpsv U Dlzsfx Aa Sorh
- Full service completed (oil change, belt change, etc.)
- Year of manufacture 1984

Specifications
- Swing over bed: 330 mm
- Swing over cross slide: 185 mm
- Turning length between centers: 750 mm
- Turning length between centers with covered lead screw and feed screw: 650 mm
- Center height: 165 mm
- Bed width: 240 mm
Lathe spindle:
- Spindle head DIN 55027: Size 5
- or similar DIN 55029 (Camlock D1): Size 4
- Spindle diameter in front bearing: 70 mm
- Spindle bore: 40 mm
- Internal taper according to DIN 228: MT5
- Centering point according to DIN 806: MT3
- Maximum faceplate diameter: 280 mm
- Standard chuck diameter: 160 mm
- Maximum chuck diameter: 200 mm
Tool slide:
- Guide length of the bed slide: 365 mm
- Cross slide travel: 175 mm
- Cross slide spindle pitch: 3 mm
- Cross slide width: 140 mm
- Top slide travel: 140 mm
- Top slide spindle pitch: 3 mm
Tailstock:
- Quill stroke: 110 mm
- Quill diameter: 50 mm
- Taper DIN 228: MT3
Spindle speeds:
- Number: 16 / 32
- Range: 45-2800 / 22-2800 rpm
Feeds:
- Number: 120
- Standard longitudinal range over gears, metric/inch: 0.016 - 0.25 mm/rev
- Standard longitudinal range over timing belts, metric/inch: 0.022 - 0.5 mm/rev
- Steep longitudinal range over gears, metric/inch: 0.125 - 2 mm/rev
- Steep longitudinal range over timing belts, metric/inch: 0.045 - 4 mm/rev
- Face feeds: 0.3733 x longitudinal feed
Thread pitches:
- Standard metric: 0.18 - 28 mm
- Standard inch: 80 - 1 1/2 thread
- Module: 0.1 - 9 mm
- Diametrical pitch: 200 - 2 3/4 thread
- High-helix thread device: 8-axis
- Lead screw pitch: 6 mm / 4 threads/in
Workpiece weights:
- Between centers without steady rests: 160 kg
- Between centers with steady rests: 50 kg
- Maximum workpiece weight (incl. clamping device): 125 kg
Electrical specifications:
- Motor power: 3 kW
- Motor rated current: 7.1 A
- Operating voltage: 400 V
- Control voltage: 42 V
Space requirements and weights:
- Dimensions W x H x D: 1832 x 1290 x 880 mm
- Turning spindle above floor: 1150 mm
- Weight: approx. 1020 kg

廣告是自動翻譯的，翻譯中可能會出現一些錯誤。