津上NP-32车削机

Tsugami Tsugami NP-32

You can check under power, after scheduling an appointment.
Dismantling, moving and transporting the machine is entirely the customer's responsibility. We can help with loading as needed. Parity: EXW Székesfehérvár.
TSUGAMI NP-32 CNC Lathe Machine



Machining rangers
Machining diameters 8 to 32 mm
Maximum machining length 210 mm (one stroke)
Maximum hole diameter 20 mm (drill)
Maximum thread diameter M14 (tap)

Slide travel
X1 slide (front slide) 85 mm (80 + 5)
X2 slide (rear slide) 115 mm (110 + 5)
Z1 slide (headstock) 215 mm

Rapid-traverse speed
For X1, X2 and Z1 slides 8m/min

Main spindle
Rotation speed
For heavy-duty cutting (standard) 35 to 4,500 rpm (stepless)
For high-speed cutting (optional) 60 to 8,000 rpm (stepless)
Bore diameter of chuckoperating tube 36 mm
Minimum indexable angle (commandable value in degrees) 5/0.00 (C-axis)
C-axis rapid-traverse speed -/60rpm
Spindle-center height 900 mm

Turrets
Number of turrets 2
Number of tool-mounting stations 12 (6 stations x 2)
Number of rotary-tool-mounting stations 12 (all stations on front and rear turret)

Tool sizes
Turning tools 16 (square) x 80 mm
Drill-holder hole diameter 35 mm
Indexing method Random

Rotary-tool spindle speed
For heavy cutting 224 to 2,240 rpm (stepless)
For high-speed cutting 475 to 4,750 rpm (stepless)


Machining rangers
Machining diameters 8 to 32 mm
Maximum machining length 210 mm (one stroke)
Maximum hole diameter 20 mm (drill)
Maximum thread diameter M14 (tap)

Slide travel
X1 slide (front slide) 85 mm (80 + 5)
X2 slide (rear slide) 115 mm (110 + 5)
Z1 slide (headstock) 215 mm

Rapid-traverse speed
For X1, X2 and Z1 slides 8m/min

Main spindle
Rotation speed
For heavy-duty cutting (standard) 35 to 4,500 rpm (stepless)
For high-speed cutting (optional) 60 to 8,000 rpm (stepless)
Bore diameter of chuckoperating tube 36 mm
Minimum indexable angle (commandable value in degrees) 5/0.00 (C-axis)
C-axis rapid-traverse speed -/60rpm
Spindle-center height 900 mm
Size & weight of machne
Machine size ( L x D x H ) 2,900 x 1,650 x 1,615 mm
Machine weight 3000 kg
Djdpfoidqvcex Amwecg
Required total electrical capacity 25 KVA
Required air volume and pressure 100NL/min. at not less than 4.5 kg/cm²
Year of manufactured 1992
Serial number 9502
Sub-spindle
Maximum thread diameter M12 (brass)
Machining diameters 8 to 32 mm
Spindle stroke (Z2-axis) 215 mm
Spindle speed 300 to 3,000 rpm
Spindle motor 1.5 kW 4P (inverter)

Motors
For main spindle 5.5/7.5 kW (AC spindle motor)
For attachment drive:
Front 0.75kW 4P (inverter type)
Rear 1.5kW 4P (inverter type)
For hydraulic motor 0.75kW 4P
For coolant pump 0.25 kW
For lubricating-oil pump 4 W

Tanks
For hydraulic oil 30 liters
For coolant 150 liters
For lubricating oil 2 liters

Size & weight of machne
Machine size ( L x D x H ) 2,900 x 1,650 x 1,615 mm
Machine weight 3000 kg
Required total electrical capacity 25 KVA
Required air volume and pressure 100NL/min. at not less than 4.5 kg/cm²

Year of manufactured 1992
Serial number 9502
Freight basis: EXW, unpackaged