激光冲孔机TRUMPF
TruLaser Cell 8030 L45
技术细节
激光
轴规格
更多详细信息
提供
- 位置:
- Nordrhein-Westfalen, 德国
– 距离：约 9,370 公里
- 可用性:
- 拍卖结束后立即
- 交付条件:
- EXW
免费
描述
Note: The machine is displaying an error indicating defects in the laser source. The replacement parts recommended by Trumpf cost approximately €30,000.
TECHNICAL DETAILS
Working Area
Travel path X-axis: 3,000 mm
Travel path Y-axis: 1,300 mm
Travel path Z-axis: 600 mm
Travel path B-axis: ±135°
Travel path C-axis: n × 360°
Working height: 605 mm
Laser
Model: TruDisk 3001
Laser power: 3,000 W
Pulse frequency: 10 Hz–100 kHz
Axis Speeds
Simultaneous axis speed: max. 173 m/min
X-axis: max. 100 m/min
Y-axis: max. 100 m/min
Z-axis: max. 100 m/min
B-axis: max. 90 rpm
C-axis: max. 90 rpm
Accuracy
Smallest programmable increment: 0.001 mm
Position scatter linear axes X/Y/Z: max. 0.03 mm
Position scatter rotary axes B/C: max. 0.005°
Position deviation linear axes X/Y/Z: max. 0.08 mm
Position deviation rotary axes B/C: max. 0.015°
MACHINE DETAILS
Control and Data Processing
Control model: Simatic IPC627
Hard disk capacity: 60 GB
Color monitor: 12" TFT
Network speed: 100 Mbit/s
Modem: 56 kBaud/s
Pneumatics and Cutting Gas
Connection pressure: min. 6 bar
Connection pressure: max. 14 bar
Compressed air consumption (machine): approx. 30 Nm³/h
Short-term compressed air consumption: max. 40 Nm³/h
Cutting gas working pressure: max. 20 bar
Electrical Connection
Main machine: 47.0 kVA
Laser unit TruDisk 3001: 19.5 kVA
Laser unit TruDisk 4001: 27 kVA
Chiller TruDisk 3001: 9 kVA
Chiller TruDisk 4001: 12 kVA
Operating hours: 97,817 h
EQUIPMENT
Hard drive with RAID controller
USB interface
Ethernet network connection
RJ-45 plug
Support for ET BEUI, TCP/IP, Novell servers, and NTFS file system
Solid-state laser of the TruDisk series
High-speed rotary changer with fixturing technology and control
Scrap conveyor for continuous removal of cut parts and leftover grids
该广告为自动翻译，可能存在翻译错误。
支付处理
- 购买附加费用:
- 18 %
- 付款条件:
- 100% 预付款
- 支付方式:
银行转账
优惠详情
- 广告编号:
- A22791315
- 参考编号:
- AUC-2609193
- 更新:
- 最近更新时间为 21.09.2026
- 独家优惠:
- 仅在拍卖中提供
参观
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-信任认证标志
什么是可信印章？
Machineseeker通过Machineseeker信任标志认证精选经销商。 在发放之前，Machineseeker 经验丰富的员工会进行标准化和全面的检测。
我们检查什么？
检查
营业执照或商业登记摘录
检查经销商的
邮寄地址
银行账户信息验证
主电话号码的
电话
可接通性验证
企业信用报告
不得显示任何负面特征
买家的投诉
可能导致认证标志被撤销这对您作为买家意味着什么？
通过 Machineseeker 信任标识，您作为买家无需自行检查，就可以识别出极有可能进行诚信且合法经营的可信经销商。
当然，在购买过程中仍可能出现分歧。 Machineseeker 对在 Machineseeker 上活跃的买家或卖家的法律违规行为不承担责任。