激光切割机Trumpf
TCF 1
技术细节
- 激光功率:
- 2,000 瓦特
提供
- 位置:
- Hessen, 德国
– 距离：约 9,443 公里
- 可用性:
- 拍卖结束后立即
- 交付条件:
- FCA
免费
免费
描述
ITEC Automation & Laser AG Gantry Portal for Coil Line with Trumpf TCF 1 Laser + GSW AG Decoiler MHR 2.5 / 1250 + Straightening and Feeding Machine VRMA 80 / 76 + Motoman ERCS-HP20-AE00 Robot
The machine will remain in operation until week 35.
The system has been regularly serviced and was partially overhauled in 2022.
Sale does not include extraction system and platform!
TECHNICAL DETAILS
Trumpf TCF 1 MHR 2.5 / 1250
Wavelength: 10.6 μm
Maximum output power: 2,000 W
Continuously adjustable power range: 100–2,000 W
Power stability referenced to nominal output: ±2 %
Beam diameter at the output window: 26 mm
Divergence angle (half angle): 0 mrad
Power distribution: TEM₀₀
Pulse frequency: 10 Hz–100 kHz
Marking mode frequency: 10 Hz
Marking mode power: 80 W
Pulse width: 10 μs–CW
Decoiler MHR 2.5 / 1250
Load capacity: max. 2,500 kg
Outer coil diameter: max. 1,250 mm
Strip width: max. 600 mm
Expansion range: min. 380 (480) mm
Expansion range: max. 430 (530) mm
Mandrel height: 1,000 mm
Drive and speed
Speed: approx. 17.5 rpm
Electric auxiliary drive power: 1.1 kW
Electrical connection
Supply voltage: 3 × 400 V
Frequency: 50 Hz
Noise emission
Sound level: 70 dB(A)
EQUIPMENT
Fixed trailing edge
Neutral conductor (N) and protective earth (PE)
Straightening and feeding machine VRMA 80 / 76
Passage width: max. 100–800 mm
Strip thickness: min. 0.4 mm
Strip thickness: max. 1.5 mm
Strip thickness at full width: max. 1.0 mm
Number of straightening rollers: 7
Number of feed rollers: 2
Roller diameter: 60 mm
Straightening roller spacing: 130 mm
Speed: approx. 15 m/min
Pass height above floor: approx. 1,000 mm
Drive type: Servomotor
Electric drive power: 2.2 kW
Drive speed: 3,000 rpm
Supply voltage: 3 × 400 V
Frequency: 50 Hz
Conductors: N, PE
Sound level: 70 dB(A)
Motoman ERCS-HP20-AE00 Robot
Number of axes: 6
Payload: 20 kg
Repeatability: ±0.06 mm
Weight: approx. 280 kg
S-axis (rotation): ±180°
L-axis (lower arm): +155° / -110°
U-axis (upper arm): +255° / -165°
R-axis (wrist roll): ±200°
B-axis (wrist pitch): ±140°
T-axis (wrist twist): ±360°
S-a
该广告为自动翻译，可能存在翻译错误。
支付处理
- 购买附加费用:
- 18 %
- 付款条件:
- 100% 预付款
- 支付方式:
银行转账
优惠详情
- 广告编号:
- A22567477
- 参考编号:
- AUC-2608106
- 更新:
- 最近更新时间为 19.08.2026
- 独家优惠:
- 仅在拍卖中提供
参观
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-信任认证标志
什么是可信印章？
Machineseeker通过Machineseeker信任标志认证精选经销商。 在发放之前，Machineseeker 经验丰富的员工会进行标准化和全面的检测。
我们检查什么？
检查
营业执照或商业登记摘录
检查经销商的
邮寄地址
银行账户信息验证
主电话号码的
电话
可接通性验证
企业信用报告
不得显示任何负面特征
买家的投诉
可能导致认证标志被撤销这对您作为买家意味着什么？
通过 Machineseeker 信任标识，您作为买家无需自行检查，就可以识别出极有可能进行诚信且合法经营的可信经销商。
当然，在购买过程中仍可能出现分歧。 Machineseeker 对在 Machineseeker 上活跃的买家或卖家的法律违规行为不承担责任。