瑞士式车床

Traub TNL20

Max. bar capacity mm: 20
Max. Z-axis travel (sliding headstock/fixed headstock) mm: 205 / 80
Max. spindle speed rpm: 10,000
Drive power 100%/40% duty cycle kW: 3.0 / 5.5
Torque 100%/40% duty cycle Nm: 5.73 / 10.5 / max. 17.2
C-axis resolution degrees: 0.001
Max. rapid traverse Z m/min: 20
Tool stations: 8
Driven tools: 8
Max. tool speed rpm: 12,000 / 8,000
Tool holder diameter mm: 45
Drive power 100%/40% duty cycle kW: 1.0 / 2.0
Turning tool cross-section mm: 16x16 / 20x20
Slide travel X mm: 120 / 165
Slide travel Y mm: ±25.4
Slide travel Z mm: 254 / 567.5
Rapid traverse X/Y/Z m/min: 20 / 20 / 40
B-axis swivel angle degrees: 105
Lower turret:
Tool stations: 8
Driven tools: 8
Max. tool speed rpm: 12,000
Tool holder diameter mm: 45
Drive power 100%/40% duty cycle kW: 1.0 / 2.0
Turning tool cross-section mm: 16x16 / 20x20
Slide travel X mm: 120
Slide travel Y mm: ±25.4
Slide travel Z mm: 155
Rapid traverse X/Y/Z m/min: 20 / 20 / 40
Back working device:
Djdewuddvjpfx Anbeut
Tool stations: 4
Slide travel X/Y/Z mm: 120 / ±25.4 / 155
Tool holder diameter mm: 25
Sub spindle:
Max. spindle bore mm: 20
Max. spindle speed rpm: 10,000
Drive power 100%/40% duty cycle kW: 3.0 / 5.5
Torque 100%/40% duty cycle Nm: 5.73 / 10.5 / max. 17.2
Slide travel X mm: 235.5
Slide travel Z mm: 258
C-axis resolution degrees: 0.001
Rapid traverse X/Z m/min: 20 / 40
Coolant system basic unit:
Pump pressure bar: 3 / 8
Tank capacity l: 250
Flow rate at 3 / 8 bar l/min: 80 / 120
Filtration degree µm: 200
Machine dimensions
Length x width x height mm: see installation plan*
Weight kg: 5,000*
Connected load kW: 40 (47 kVA)

该广告为自动翻译，可能存在翻译错误。