数控车床Traub
TNK 12k
技术细节
- 车削长度:
- 50 毫米
- 主轴速度（最大）:
- 12,000 转/分
- 棒通过口:
- 12 毫米
- 控制器型号:
- Mitsubishi TX-8i
- 副主轴最高转速:
- 12,000 转/分
提供
- 位置:
- Bayern, 德国
– 距离：约 9,414 公里
- 可用性:
- 拍卖结束后立即
- 交付条件:
- FCA
€1,000.00 (约束性)
免费
描述
No reserve – guaranteed sale to the highest bidder!
TECHNICAL DETAILS
Turning length: 50 mm
Main spindle
Technology: Belt-driven spindle
Spindle speed: 12,000 rpm
Power: 4 kW
Torque: 7 Nm
Bar capacity: 12 mm
Z1 axis travel: 50 mm
Workpiece clamping: Collet chuck
Sub spindle
Technology: Belt-driven spindle
Spindle speed: 12,000 rpm
Power: 4 kW
Torque: 7 Nm
X3/Z4 axis travel: 222/139 mm
Rapid traverse in X3/Z4: 15 m/min
Workpiece clamping: Collet chuck
Tool carrier I (X/Y)
Technology: Turret with 6 stations (driven tool)
Tool holder: Ø25 mm
Tool drive: 8,000 rpm, 1.5 kW, 2.4 Nm
Travel in X1/Y1: 35/37.5 mm
Rapid traverse in X1/Y1: 15 m/min
Tool carrier II (X/Z)
Technology: Turret with 6 stations (driven tool)
Tool holder: Ø25 mm
Tool drive: 8,000 rpm, 1.5 kW, 2.4 Nm
Travel in X2/Z2: 35/50 mm
Rapid traverse in X2/Z2: 15 m/min
Front unit
Number of stations: 4
Tool holder: Ø28 mm
Indexing pitch: 32 mm
Tool drive: 12,000 rpm, 4 kW, 7 Nm
Number of driven stations: 4
Travel in X3/Z3: 222/139 mm
Rapid traverse in X3/Z3: 15 m/min
Rear unit
Number of stations: 4
Tool holder: Ø28 mm
Indexing pitch: 32 mm
Tool drive: 8,000 rpm, 1.5 kW, 2.4 Nm
Number of driven stations: 4
Travel in X4: 39 mm
Rapid traverse in X4: 15 m/min
MACHINE DETAILS
Control: Mitsubishi TX-8i
Dimensions & weight
Spindle center height above floor: 1,050 mm
Dimensions (L x W x H): 1,450 x 1,098 x 1,700 mm
Dimensions (L x W x H) with standard coolant tank: 2,355 x 1,098 x 1,700 mm
Weight with control cabinet (max. equipment): 2,000 kg
Weight without control cabinet (max. equipment): 1,600 kg
Weight with control cabinet (min. equipment): 1,200 kg
Weight without control cabinet (min. equipment): 850 kg
Operating hours
Control on-hours: 19,441 h
Automatic hours 1: 7,607 h
Automatic hours 2: 6,720 h
Production time: 38,989 h
Total counter: 50,536 h
EQUIPMENT
Chip conveyor
Coolant pump
FMB Minimaga 3200 bar feeder
Workpiece discharge tube
Mechanically prepared interface
Various fixed holders
Flush gun
廣告是自動翻譯的，翻譯中可能會出現一些錯誤。
支付处理
- 购买附加费用:
- 18 %
- 付款条件:
- 100% 预付款
- 支付方式:
银行转账
优惠详情
- 產品ID:
- A20762167
- 參考編號:
- AUC-2512098
- 最後更新:
- 於 15.12.2025
- 独家优惠:
- 仅在拍卖中提供
参观
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-信任认证标志
什么是可信印章？
Machineseeker通过Machineseeker信任标志认证精选经销商。 在发放之前，Machineseeker 经验丰富的员工会进行标准化和全面的检测。
我們要檢查什麼？
查看
交易許可證 或 商業登記冊摘錄
查看交易商的
地址
確認
銀行連接
驗證
電話
是否可接通 主要的電話號碼
信用報告
中不能包含負面的must not contains negative criteria
買家投訴
會導致收回信任標誌这对您作为买家意味着什么？
通过 Machineseeker 信任标识，您作为买家无需自行检查，就可以识别出极有可能进行诚信且合法经营的可信经销商。
当然，在购买过程中仍可能出现分歧。 Machineseeker 对在 Machineseeker 上活跃的买家或卖家的法律违规行为不承担责任。